Search

Herein, a novel form of bicomponent nanofiber membrane containing stereo-complex polylactic acid (SC-PLA) was successfully produced by the side-by-side electrospinning of Poly (L-lactic acid) (PLLA) and Poly (D-lactic acid) (PDLA). We demonstrate that through these environmentally sustainable materials, highly efficient nanofiber assemblies for filtration can be constructed at very low basis weight. The physical and morphological structure, crystalline structure, hydrophobicity, porous structure, and filtration performance of the fibrous membranes were thoroughly characterized. It was shown that the fabricated polylactic acid (PLA) side-by-side fiber membrane had the advantages of excellent hydrophobicity, small average pore size, high porosity, high filtration efficiency, low pressure drop as well as superior air permeability. At the very low basis weight of 1.1 g/m2, the filtration efficiency and pressure drop of the prepared side-by-side membrane reached 96.2% and 30 Pa, respectively. Overall, this biomass-based, biodegradable filtration material has the potential to replace the fossil fuel-based polypropylene commercial meltblown materials for the design and development in filtration, separation, biomedical, personal protection and other fields. [ABSTRACT FROM AUTHOR]

Removal of trace water from oil is essential for a high‐performance fuel supply system. Trace water in fuel is a crucial contributor to frequent system maintenance and failure. In this work, an electrospun polyacrylic acid/polyvinyl alcohol (PAA/PVA) nanofibrous xerogel membrane (NFM) is prepared to remove trace water in oil. Based on the optimization of the weight ratio and the crosslinking conditions of PAA/PVA, the resultant NFM shows remarkable water‐retaining capacity (swelling ratio of 124.8 g/g) and rapid absorption property. The optimal membrane displays a small average pore size of 523.2 nm, high porosity of 79.6% as well as robust tensile strength of 8.1 MPa. Additionally, after just one pass through a single layer membrane (thickness of 35 ± 3 µm and areal density of 3.5 ± 0.5 g m−2), the milky oil containing 1 wt% water is clarified and the water content reduced to 130 ppm. With extensive water being absorbed into the 3D network (different with the conventional separation mechanism) as well as good compatibility with oil, a multilayer pleated scheme may provide a practical methodology for enhancing fuel oil properties and performances. [ABSTRACT FROM AUTHOR]