Search

An emission inventory, involving both air pollutants (APs) and greenhouse gases (GHGs), is needed so that the questions of air pollution and climate change can be co-addressed, coordinated, and collaborated upon. In this study, an emission inventory, including both APs and CO 2 (representing GHGs), was developed for China 2019 using two special measures. First, the framework of air pollution source classification was used for the integrative inventory and then the CO 2 emissions for each sector/subsector/source in the GHG inventory were precisely arranged into the framework of APs by every possible means such as drawing on the constraints from the International Industrial Classification of All Economic Activities (ISIC), which enabled the sharing of common or intrinsically connected activity data for both APs and CO 2. Second, an attempt was made to deduce the activity data of various industrial processes through proper interpretation of the information carried in Pollutant Permits. The calculated emissions of APs and CO 2 were found to be comparable to the results of other studies. Additionally, the average per capita CO 2 and pollution equivalents (PEs) were 10.29 ± 6.75 tons and 11.72 ± 7.35 tons, respectively, over the provincial regions with per capita gross domestic product (GDP) lower than ￥70000 (about $10000). Whereas the average per capita CO 2 and PEs dropped to 6.10 ± 1.83 tons and 6.70 ± 2.09 tons, respectively, over the provincial regions with per capita GDP higher than ￥70000. This somewhat supports the philosophy of the Environmental Kuznets Curve (EKC) regarding the close connection between emission and development. Moreover, the two emission intensities (for APs and CO 2) were found to vary synchronously among the provinces, reflecting the inter-linked fates of the two emissions under the control measures oriented toward either APs or GHGs. [Display omitted] • An emission inventory integrating air pollutants and CO 2 are compiled. • GHG classification framework are used for the integrative inventory with additional constraints from ISIC. • Pollutant-Permit information is employed to derive activity data of industrial processes and links. • The EKC philosophy on emission/development relation is partly supported. [ABSTRACT FROM AUTHOR]

In order to improve the regional air quality, many control strategies have been developed by Chinese government for reducing air pollutant emission from power plants, industrial and transport sources during the past decade. However, little attention has been paid to residential combustion sources. To fill the knowledge gap, a series of surveys were carried out to investigate the residential energy use in Beijing-Tianjin-Hebei (BTH) region during the period of 2013–2014. Study shows that the actual average amount of residential coal consumption is over 0.7 t yr − 1 per capita in 2013, which is much higher than that of 0.15 t yr − 1 per capita reported in the 2014 China Energy Statistical Yearbook (CESY). Combining the investigated activities data with the best available emission factors (EFs), bottom-up method was used to evaluate the potential air pollutant emissions from residential coal combustion in BTH region in 2013. The results indicate that Baoding is the top contributor to the whole BTH region and accounts for approximately 15% of the regional residential emissions in 2013. The spatial pattern of air pollutants shows that high emissions locate in the southeast, along the Yanshan and Taihang Mountains, where much more rural people live and coal combustion is prevalent in winter. The future emission scenario at the end of the 13th Five Year Plan (in 2020) was also predicted based on the policy guidance for the residential coal consumptions in the BTH region. The scenario analysis indicates that air pollutant emissions will drop substantially around 90% because more strict rules will be made for reducing the residential coal consumption. With combined survey information and statistical data, the uncertainty of the emission inventory which was established in this study for the residential sector in the BTH region is reduced and the emission inventory is more reliable for air quality decision making. [ABSTRACT FROM AUTHOR]

Municipal solid waste (MSW) contains considerable hazardous components and the widely-distributed open MSW burning in heavily-populated urban areas can cause direct exposure of hazardous materials to citizens. By determining the best available representation of composition-varying and time-varying emission factors with fuzzy mathematics method and S-shape curves, a comprehensive atmospheric emission inventories of 9 typical toxic heavy metals (THMs, e.g. mercury (Hg), arsenic (As), lead (Pb), cadmium (Cd), chromium (Cr), selenium (Se), copper (Cu), zinc (Zn), and nickel (Ni)) from open MSW burning activities in China is established during the period of 2000–2013 for the first time. Further, the emissions in 2013 are allocated at a high spatial resolution of 0.5° × 0.5° grid by surrogate indexes. The results show that 9 typical THMs emissions from open MSW burning are estimated at 21.25 t for Hg, 131.52 t for As, 97.12 t for Pb, 10.12 t for Cd, 50.58 t for Cr, 81.95 t for Se, 382.42 t for Cu, 1790.70 t for Zn, and 43.50 t for Ni, respectively. In terms of spatial variation, the majority of emissions are concentrated in relatively developed and densely-populated regions, especially for the eastern, central and southern regions. Moreover, future emissions are also projected for the period of 2015–2030 based on different scenarios of the independent and collaborative effects of control proposals including minimizing waste, improving MSW incineration ratio, and enhancing waste sorting and recycling, etc. The collaborative effect of the above proposals is expected to bring the most effective reduction to THMs emissions from open MSW burning in China except for Hg. The results will be supplementary to all anthropogenic emissions and useful for relevant policy-making and the improvement of urban air quality as well as human health. [ABSTRACT FROM AUTHOR]