Search

The article provides an overview of the mercury control technologies aimed at lessening the mercury emissions from coal-fired electric utility boilers in the U.S. The author stressed that mercury emissions from anthropogenic emission sources posed a global threat that needs to be subsided. In response, the U.S. Environmental Protection Agency proclaimed the Clean Air Mercury Rule to permanently cap and abridge emissions of mercury from coal-fired power plants. Another regulation promulgated is the Clean Air Interstate Rule, which compels further reduction of sulphur dioxide and nitrogen oxides from these power plants. Among the control technologies stressed include flue-gas desulfurization and limestone forced- oxidation.

Recent regulations have required reductions in emissions of nitrogen oxides (NOx) from electric utility boilers. To comply with these regulatory requirements, it is increasingly important to implement state-of-the-art NOx control technologies on coal-fired utility boilers. This paper reviews NOx control options for these boilers. It discusses the established commercial primary and secondary control technologies and examines what is being done to use them more effectively. Furthermore, the paper discusses recent developments in NOx controls. The popular primary control technologies in use in the United States are low-NOx burners and overfire air. Data reflect that average NOx reductions for specific primary controls have ranged from 35% to 63% from 1995 emissions levels. The secondary NOx control technologies applied on U.S. coal-fired utility boilers include reburning, selective noncatalytic reduction (SNCR), and selective catalytic reduction (SCR). Thirty-six U.S. coal-fired utility boilers have installed SNCR, and reported NOx reductions achieved at these applications ranged from 15% to 66%. Recently, SCR has been installed at >150 U.S. coal-fired utility boilers. Data on the performance of 20 SCR systems operating in the United States with low-NOx emissions reflect that in 2003, these units achieved NOx emission rates between 0.04 and 0.07 lb/106 Btu. [ABSTRACT FROM AUTHOR]

Under the Clean Air Act Amendments of 1990, the U.S. Environmental Protection Agency (EPA) determined that regulation of mercury emissions from coal-fired power plants is appropriate and necessary. To aid in this determination, preliminary estimates of the performance and cost of powdered activated carbon (PAC) injection-based mercury control technologies were developed. This paper presents these estimates and develops projections of costs for future applications. Cost estimates were developed using PAC to achieve a minimum of 80% mercury removal at plants using electrostatic precipitators and a minimum of 90% removal at plants using fabric filters. These estimates ranged from 0.305 to 3.783 mills/kWh. However, the higher costs were associated with a minority of plants using hot-side electrostatic precipitators (HESPs). If these costs are excluded, the estimates range from 0.305 to 1.915 mills/kWh. Cost projections developed using a composite lime-PAC sorbent for mercury removal ranged from 0.183 to 2.270 mills/kWh, with the higher costs being associated with a minority of plants that used HESPs. [ABSTRACT FROM AUTHOR]

Highlights the study, which finds simultaneous control of Hg 0, SO 2, and NO x by novel oxidized calcium-based sorbents. Control of Hg emissions from coal-fired combustors; Implications of the study toward the development of multi-pollutant control technologies.