Search

Sizing High-Pressure Grinding Rolls (HPGR) requires a large quantity of material, making it not attractive and costly to be considered for new mining projects regardless of their energy consumption reduction benefits. Ongoing efforts are being made at the University of British Columbia to predict the behaviour of the HPGR using a low quantity of material on a piston-and-die press apparatus. Although the energy requirements and size reduction predictive models are already developed, there is still a need to predict the HPGR throughput on a small-scale test. This paper presents a new model to predict the HPGR throughput based on the previously developed model to predict the operational gap by using less than 2 kg of sample. The throughput model was developed using machine learning techniques and calibrated using pilot-scale HPGR tests and piston press tests. The resulting model has an R2 of 0.91 with an average prediction error of ±4.2%. The developed methodology has the potential to fill the gap of the missing throughput model. Further pilot-scale HPGR testing is required to continue validating the model. [ABSTRACT FROM AUTHOR]

[Display omitted] • 27 laboratory HIG5 grinding tests are performed for modelling the influence of operational variables. • Stress analysis is applied for understanding laboratory variables' correlation with their production level. • Correlation factors are determined based on empirical fitting with production data. • Laboratory models are calibrated for predicting and improving large-scale mill performance. As a fine and ultrafine grinding technology, the High Intensity Grinding (HIG) Mill is relatively new and there is opportunity to improve its performance by adjusting operational conditions. A laboratory HIG5 mill is commonly used for HIG mill sizing and scale up, however the clear correlation between the operational variables of laboratory mill to their production level is somewhat lacking. This paper presents a stress-based approach for predicting and improving large-scale HIG mill performance. A total of 27 experimental tests were performed with a HIG5 mill over a range of operational variable set points, including media density, media filling level, feed solid content, mill speed and flow rate. The influence of the variables on product size, mill operating power and specific grinding energy was characterized via multivariable linear regression modelling. Based on theoretical stress analysis and empirical calibration with available survey data, the model derived from laboratory testing was calibrated to predict the operation of the commercial HIG1600 mill. An approach was proposed for determining the effect of operational variables using a HIG5 that can be directly applied to reduce energy consumption at a given mill feed rate and product size target for the production scale mill. Results demonstrated that the stress-based approach integrated with laboratory testing can be used for predicting and improving large-scale HIG mill performance. [ABSTRACT FROM AUTHOR]