Search

Ground-coupled heat pumps are increasingly being utilized to heat and cool buildings. Although it is difficult to size and to predict their behavior and performance, their design can be optimized via simulations. EnergyPlus is a popular energy simulation program for modeling building heating and other energy flows and, since it is organized to consider borehole heat exchangers via the well-known g-functions approach, it can be used advantageously for that purpose. The Capacity Resistance Model is another recent numerical simulation tool devoted to ground and borehole heat exchangers. In this work, two methods to calculate the g-fucntions were analyzed, using as case-study a real office building, whose imbalance between the heat extracted and injected into the ground was found to be appreciable. The energy imbalance involves a ground temperature drift affecting the system efficiency. The results of the EnergyPlus g-functions and the Capacity Resistance Model model approaches were compared. The capacity of the two methodologies to accurately simulate this phenomenon were analysed also with reference to the available building's long-term monitoring data. The analysis showed the importance of using g-functions suitable to reflect the layout of the borehole field, in order to correctly evaluate the energy performance of the entire ground source heat pump system. [ABSTRACT FROM AUTHOR]

Abstract: In this paper a numerical model to analyze the thermal behaviour of vertical ground heat exchangers with a helical shaped pipe is presented. This type of configuration can be a suitable alternative to conventional ground heat exchangers, especially when the heating and cooling loads of the building are very low. The model describes the heat transfer problem by means of a network of interconnected thermal resistances and capacitances. Moreover, as the investigated ground heat exchanger is usually installed in shallow depth, the model takes into account the interaction between the ground and the ambient environment which affects the fluid heat carrier temperature into the heat exchanger and, as a consequence, the energy efficiency of the heat pump. After a sensitivity analysis on the mesh parameters, the presented model is compared with experimental data and the simulation results show good agreement with the measurements. Finally, analyses to investigate the influence of the weather conditions, of the axial heat transfer and of the pitch between the turns of the helical pipe for two types of ground are carried out. [Copyright &y& Elsevier]

Abstract: Better energy efficiency of ground coupled heat pump systems in comparison with traditional applications leads to continued growth in the number of installations for space conditioning. The solution with vertical heat exchangers is the most widespread. The design of the borehole heat exchangers (BHEs) is a nodal point, both from an energy efficiency and an economic point of view. In literature, several methods to design these systems are available. However, to promote their application, easy-to-use procedures are required; furthermore designers very often are discouraged from the use of not-open or complicated computational tools. Among the literature models, the ASHRAE method is surely the simplest procedure and, as a consequence, it is suitable for this goal. In this approach, sizing of the BHE length is strongly affected by the parameter named penalty temperature, which is an index to evaluate the long-term behaviour of the borehole field. In this paper, a review of this index is reported and in addition a new approach for its evaluation is presented. Furthermore, a detailed analysis of the proposed method is performed on a real case-study building with only heating conditioning. [Copyright &y& Elsevier]

A simulation model of ground source heat pump systems has been used to investigate to what extent a variable flow of the heat-carrier fluid of the ground loop affects the energy efficiency of the entire system. The model contemporaneously considers the borehole heat exchangers, the heat pump, the building load, and the control strategies for the circulation pumps of the ground loop. A constant speed of the circulation pumps of the ground loop was compared with a variable flow controlled by means of a constant temperature difference across the heat pump on the ground side considering the load profile of an office building located in North Italy. The analysis was carried out for a single U-tube, double U-tube and coaxial pipe heat exchangers. The control strategies adopted to manage the flow rate of the heat-carrier fluid of the ground loop affect both the heat exchange rate of the borehole field and the heat pump’s long-term energy efficiency. The simulations show considerable differences in the system’s seasonal energy efficiency. The constant speed of the circulation pumps leads to the best results as far as the heat pump’s energy performance was concerned, but this advantage was lost because of the greater amount of electrical energy used by the circulation pumps; this, of course, affects the energy efficiency of the entire system. The optimal solution appears then to be a constant temperature difference in the heat-carrier fluid across the heat pump. [ABSTRACT FROM AUTHOR]