Search

This paper proposes a multi-agent double deep Q network (DDQN)-based approach to jointly optimize the beamforming vectors and power splitting (PS) ratio in multi-user multiple-input single-output (MU-MISO) simultaneous wireless information and power transfer (SWIPT)-enabled heterogeneous networks (HetNets), where a macro base station (MBS) and several femto base stations (FBSs) serve multiple macro user equipments (MUEs) and femto user equipments (FUEs). The PS receiver architecture is deployed at FUEs. An optimization problem is formulated to maximize the achievable sum information rate of FUEs under the constraints of the achievable information rate requirements of MUEs and FUEs and the energy harvesting (EH) requirements of FUEs. Since the optimization problem is challenging to handle due to the high dimension and time-varying environment, an efficient multi-agent DDQN-based algorithm is presented, which is trained in a centralized manner and runs in a distributed manner, where two sets of deep neural network parameters are jointly updated and trained to tackle the problem and avoid overestimation. To facilitate the presented multi-agent DDQN-based algorithm, the action space, the state space and the reward function are designed, where the codebook matrix is employed to deal with the complex transmit beamforming vectors. Simulation results validate the proposed algorithm. Notable performance gains are achieved by the proposed algorithm due to considering the beam directions in the action space and the adaptability to the Doppler frequency shifts. Besides, the proposed algorithm is shown to be superior to other benchmark ones numerically. [ABSTRACT FROM AUTHOR]

This paper investigates the relay-assisted wireless information and power transfer enabled hybrid visible light communication (VLC)-radio frequency (RF) network, where a light emitting diode (LED) access point (AP) serves multiple information users (IUs) and multiple energy harvesting users (EHUs). IUs are allowed to receive information from the LED AP through time-division-multiple-access (TDMA) manner by either the single-hop VLC-ONLY mode or the relay-assisted dual-hop VLC-RF mode, while EHUs harvest energy via the VLC links. An optimization problem is formulated to maximize the achievable information rate of IUs by jointly optimizing the access mode selection, the direct current (DC) offset at the LED AP, the peak amplitude of the alternating current (AC) component at the LED AP, the electrical power allocated to the LED AP and the power allocation at relay, subject to the energy harvesting (EH) requirement constraints of EHUs. To tackle the non-convex problem with binary variables, we first decompose it into two subproblems in terms of the two access modes. Then, the subproblems are equivalently transformed and solved by the proposed successive convex approximation (SCA)-based algorithms. Simulation results show that significant performance gain can be achieved by optimizing the DC offset. It is also observed that the area where the VLC-ONLY mode is superior to the VLC-RF mode is enlarged with the decrease of the minimal EH requirement. Besides, the achievable information rate of IUs by the VLC-RF mode first increases and then decreases with the increment of the distance between the relay and the LED AP. [ABSTRACT FROM AUTHOR]

This paper studies the information-energy ($\mathrm{I}$ - $\mathrm{E}$) region for simultaneous wireless information and power transfer (SWIPT) networks in mobility scenarios, where a moving transmitter simultaneously transmits information and power to a fixed receiver, and the receiver adopts power splitting (PS) receiving architecture. In order to characterize the tradeoff between the received information and harvested energy, the $\mathrm{I}$ - $\mathrm{E}$ region is defined, and corresponding optimization problems are formulated to explore the system $\mathrm{I}$ - $\mathrm{E}$ regions by jointly optimizing the transmit power at the transmitter and the PS ratio at the receiver with three popular energy harvesting (EH) models, i.e., traditional linear EH model, the logistic nonlinear EH model and the piecewise nonlinear EH model. Particularly, to efficiently solve the nonconvex optimization problem with the logistic nonlinear EH model, a successive convex approximate (SCA)-based algorithm is proposed, which is able to characterize the lower bound of the $\mathrm{I}$ - $\mathrm{E}$ with low complexity. To solve the optimization problems with the linear and piecewise EH models, as they are convex, some closed and semi-closed solutions are derived by using Lagrange dual method and KKT conditions. Numerical results show that compared with the $\mathrm{I}$ - $\mathrm{E}$ regions under the linear and piecewise EH models, that under the logistic nonlinear EH model is smaller due to the limitations of practical EH circuit features. Moreover, with a fixed moving speed, when the transmit power is relatively large, the logistic nonlinear EH model can be replaced with the piecewise one due to the relatively small gap between their achieved $\mathrm{I}$ - $\mathrm{E}$ regions. Additionally, for a fixed moving track length, the higher moving speed yields the smaller $\mathrm{I}$ - $\mathrm{E}$ region with all three EH models. [ABSTRACT FROM AUTHOR]

This article investigates the simultaneous wireless information and power transfer-wireless powered communication network systems, where a multiantenna source transmits information to a multiantenna destination with the assistance of multiple single-antenna energy-constrained relays. For such a system, a transmission protocol is presented based on the $J$ th best relay selection and the transmit antenna selection such that the information and power are transferred over the channel with the largest instantaneous power gain. Time switching receiver architecture is adopted at the relays for information decoding and energy harvesting (EH). The system information transmission performances in Rayleigh fading are analyzed with the nonlinear EH model and imperfect channel state information (CSI), and the closed-form expressions of the system outage probability and reliable throughput are derived. In order to provide more concise results, the corresponding approximate expressions are also derived at low and high signal-to-noise ratio. Numerical results show that our obtained theoretical results match Monte Carlo simulation results very well, demonstrating the effectiveness of our obtained analytical results. Besides, it also shows that the imperfect CSI of the source-to-relay link has greater impact on the system performance than that of the relay-to-destination link. Additionally, by using the nonlinear EH model, the false performance caused by the linear EH model can be reduced. [ABSTRACT FROM AUTHOR]

This paper considers an MISO simultaneous wireless information and power transfer (SWIPT) system, where one transmitter serves multiple authorized receivers in the presence of several potential eavesdroppers (idle receivers). To prevent the information interception by eavesdroppers, artificial noise (AN) is embedded into the transmit signals. The non-linear energy harvesting (EH) model is adopted and a novel power-splitting (PS) EH receiver architecture is proposed. Stochastic uncertainty channel model (SUM) is considered for the idle receivers due to outdated channel feedback. A global energy efficiency (GEE) maximization problem is formulated by jointly optimizing the transmit beamforming vectors, the AN covariance matrix, and the PS ratios, under the minimal rate and secure transmission constraints of authorized receivers, the EH requirement constraints of idle receivers, and the total available power constraint at the transmitter. Since the problem is non-convex with no known solution, it is solved based on the following solution framework. Firstly, the PS ratios are optimized by using the bisection method and successive convex approximation (SCA), and then, the transmit beamforming vectors and the AN covariance matrix are jointly optimized by using a Dinkelbach’s Algorithm based method, where SCA is applied to solve its inner subproblem. It is theoretically proved that by involving AN, the system GEE can be improved. Numerous results show that system GEE first increases and then keeps unchanged with the increment of the total available power, but it first keeps unchanged and then decreases with the increment of the minimal rate requirement. It is also observed that compared with traditional EH receiver architecture and linear EH model, our proposed PS EH receiver architecture is able to achieve higher GEE and avoid false output power at idle receivers. [ABSTRACT FROM AUTHOR]

This paper investigates the artificial noise (AN)-aided multi-cell coordinated beamforming (MCBF) for secure simultaneous wireless information and power transfer in both centralized and distributed manners. The proposed transmit design is formulated into a power-minimization problem to guarantee the authorized users’ information and energy harvesting (EH) requirements while avoiding the information interception by unauthorized users. Power splitting receiver architecture and the non-linear EH model are employed. Both perfect and imperfect channel state information (CSI) cases are considered. For the perfect CSI case, the non-robust design is presented by applying semi-definition relaxation (SDR). When no user harvests energy, the global optimum is guaranteed, and when some users harvest energy, approximate global optimum is achieved. For the imperfect CSI case, the worst-case robust design under the deterministic uncertainty channel model is studied, where a solving approach based on SDR and S-procedure is proposed, and the statistically robust design under the stochastic uncertainty channel model is also studied, where an upper bound to the global optimum is obtained by using SDR and Bernstein-type inequality. We further propose a distributed AN-aided MCBF design framework by using an alternating direction method of multipliers for the non-robust, worst-case robust, and statistically robust designs, with which each BS is able to optimize its own transmit design with the local CSI. Simulation results demonstrate our theoretical analysis, which show that our proposed distributed algorithm converges to the optimal results obtained by the centralized one. It also shows that employing the non-linear EH model is able to avoid false output power and save power consumption at the BSs. [ABSTRACT FROM AUTHOR]

The energy harvesting network in mobile environment is promising for sustainable environment and green communication. How to efficiently use the harvested energy is a key to improve the performance of energy harvesting communication network. This paper considers a point-to-point communication scenario where a static sensor harvests energy and transmits information to a moving agent. From the viewpoint of information theory, we present an optimal power allocation (PA) solution to achieve the maximum channel service. We prove that using a water-filling transmission power, during a single transmission timeslot, the energy depletion time is uniquely determined by the initial energy in the sensor regardless of the energy-harvesting power. On the other hand, the energy depletion time is a determinant of whether the energy is exhausted at the end of the transmission timeslot. Based on the obtained results, an event-triggered transmission strategy is proposed where a sensor harvests energy to a certain amount so as to trigger information transmission towards the moving agent. Some numerical results are provided to confirm the theoretical analysis and our proposed event-triggered implementation approach. [ABSTRACT FROM AUTHOR]

We consider content delivery to users in a system consisting of a macro base station (BS), several energy-harvesting small cells (SCs), and many users. Each SC has a large cache and stores a copy of all contents in the BS. A user’s content request can be either handled by the SC for free if it has enough energy, or by the BS that has a cost. Each user has a finite cache and can store some most popular contents. We propose an efficient coded content caching schemes and an optimal transmission schemes for this system to maximally off-load the data traffic from the macro BS to the energy-harvesting SCs, and therefore minimize the power consumption from the grid. Specifically, the proposed coded caching scheme stores fractions of some most popular contents, such that contents requested from multiple users can be simultaneously delivered by the BS or SC. Moreover, the optimal transmission policy is formulated and solved as a Markov decision process. Extensive simulation results are provided to demonstrate that the proposed coded caching and transmission schemes can provide significantly higher traffic off-loading capability compared with systems with no caching or with uncoded caching, as well as systems that employ heuristic-based transmission schemes. [ABSTRACT FROM PUBLISHER]

Wireless energy transfer, namely, radio frequency (RF)-based energy harvesting, is a potential way to prolong the lifetime of energy-constrained devices, especially in wireless sensor networks. However, due to huge propagation attenuation, its energy efficiency is regarded as the biggest bottleneck to wide applications. It is critical to find appropriate transmission policies to improve the global energy efficiency in this kind of system. To this end, this paper focuses on the sensor networks scenario, where a mobile control center powers the sensors by RF signal and also collects information from them. Two related schemes, called harvest-and-use scheme and harvest-store-use scheme, are investigated. In the harvest-and-use scheme, as a benchmark, both constant and adaptive transmission modes from sensors are discussed. In the harvest-store-use scheme, we propose a new concept, the best opportunity for wireless energy transfer, and use it to derive an explicit closed-form expression of optimal transmission policy. It is shown by simulation that a considerable improvement in terms of energy efficiency can be obtained with the help of the transmission policies developed in this paper. Furthermore, the transmission policies are also discussed under the constraint of fixed information rate. The minimal required power, the performance loss from the new constraint, and the effect of fading are then presented. [ABSTRACT FROM PUBLISHER]

For a two-way relay network (TWRN) with three nodes, we discuss the performance optimization of digital network coding (DNC) and physical network coding (PNC) schemes under the energy harvesting (EH) constraints and peak power constraints. We also consider the energy transfer between nodes, which is referred to as energy co-operation. To find the maximal achievable performance, we first consider the case of offline scheduling, formulate the corresponding optimization problems, find the optimal solutions, as well as present some useful theoretical properties on optimality. Then we move to the online scheduling, and propose both dynamic programming and some intuitive policies to approach the performance of its offline counterpart. Numerical results show that PNC outperforms DNC due to the higher spectrum efficiency and the intrinsic coding gains, under the same conditions. Furthermore, it is observed that if the relay harvests much more energy and shares it with the two source nodes, DNC with energy co-operation scheme has the potential to perform comparable to or even better than PNC without energy co-operation scheme, which validates the importance of energy co-operation in contemporary communication systems. [ABSTRACT FROM AUTHOR]

Energy harvesting technique is a potential way for relay node energy supply in cooperative networks with respect to deployment flexibility and maintenance charge reduction. However, unlike traditional power source, it is intuitive that the fluctuation of harvested energy flow can degrade the benefit resulted from relay-aided cooperative transmission. To this end, this paper focuses on the performance analysis of an energy harvesting relay-aided cooperative network under slow fading channel from a perspective of outage behavior and attempts deriving the closed-form expression of outage probability of the proposed cooperative protocol. Compared with simple direct transmission protocol, it is proved that a multiplicative gain for improving system performance in terms of minimizing outage probability can be obtained by energy harvesting relay-aided cooperative transmission. In particular, if there are multiple available relay nodes around the environment or the energy-exhausted probability of relay node is small, it is very profitable to employ relay-aided cooperative transmission protocol. [ABSTRACT FROM PUBLISHER]

This paper investigates the simultaneous wireless information and energy transfer for the non-regenerative multiple-input multiple-output orthogonal frequency-division multiplexing (MIMO-OFDM) relaying system. By considering two practical receiver architectures, we present two protocols, time switching-based relaying (TSR) and power splitting-based relaying (PSR). To explore the system performance limits, we formulate two optimization problems to maximize the end-to-end achievable information rate with the full channel state information (CSI) assumption. Since both problems are non-convex and have no known solution method, we firstly derive some explicit results by theoretical analysis and then design effective algorithms for them. Numerical results show that the performances of both protocols are greatly affected by the relay position. Specifically, PSR and TSR show very different behaviors to the variation of relay position. The achievable information rate of PSR monotonically decreases when the relay moves from the source towards the destination, but for TSR, the performance is relatively worse when the relay is placed in the middle of the source and the destination. This is the first time such a phenomenon has been observed. In addition, it is also shown that PSR always outperforms TSR in such a MIMO-OFDM relaying system. Moreover, the effects of the number of antennas and the number of subcarriers are also discussed. [ABSTRACT FROM AUTHOR]

This paper studies a simultaneous wireless information and power transfer (SWIPT)-aware fog computing by using a simple model, where a sensor harvests energy and receives information from a hybrid access point (HAP) through power splitting (PS) receiver architecture. Two information processing modes, local computing and fog offloading modes are investigated. For such a system, two optimization problems are formulated to minimize the sensor's required power for the two modes under the information rate and energy harvesting constraints by jointly optimizing the time assignment and the transmit power, as well as the PS ratio. The closed-form and semi-closed-form solutions to the proposed optimization problems are derived based on convex optimization theory. Simulation results show that neither mode is always superior to the other one. It also shows that when the number of logic operations per bit associated with local computing is less than a certain value, the local computing mode is a better choice; otherwise, the fog offloading mode should be selected. In addition, the mode selection associated with the positions of the user for fixed HAP and fog server (FS) is also discussed. [ABSTRACT FROM AUTHOR]