Search

The free‐standing triboelectric nanogenerator (F‐S TENG) is demonstrated to be an efficient energy conversion device. However, limited by the inherent features of high‐voltage, low alternating current and high output impedance, TENGs suffer from inefficient energy utilization and difficulties in practical applications. Therefore, the efficient harvest of mechanical energy and optimization of output are currently critical issues for TENGs. Here, a strategy is proposed for optimizing the inherent features by coupling F‐S TENG to a capacitor auto‐conversion circuit (CAC). For the first time, a specific idea is proposed explicitly to reduce the output impedance by the management circuit. Eventually, a high current density of 32 A m−2 and a charge density of 1.75 mC m−2 are achieved, which is 8.78 times higher than previous works. The power density and energy density reach to 124 W m−2 and 252 mJ m−2 under 470 and 150 Ω respectively. Then, 5000 LEDs and two lamps rated at 220 V and 50 W are manually illuminated. The resulting pulse output is utilized as a trigger source for the thyristor, enabling DC contactless switching. This work provides a novel approach to realize high‐performance DC output of TENGs and effectively reduce external load impedance. [ABSTRACT FROM AUTHOR]

Nowadays, the development of direct current triboelectric nanogenerators (DC‐TENGs) is oriented toward practical applications such as real‐time efficient harvesting and supplying energy. This demands DC‐TENGs with a low loss factor, high energy utilization efficiency, device portability, and output stability. Herein, a constant‐voltage DC‐TENG (C‐DC‐TENG) with robust output performance, using the ternary dielectric triboelectrification effect is demonstrated, which gives a crest factor of 1.0082. The key to improving the output charge density is the number of subdivision units, a result of theoretical simulations and experiments of C‐DC‐TENG. The optimized C‐DC‐TENG achieves not only an output charge density of 3.902 mC m−2 per round but also an average power density of 8.77 W m−2 (3.508 W m−2 Hz−1), which both set a new record for the rotary DC‐TENG. Moreover, introducing soft polyester fur enables C‐DC‐TENG to maintain 100% output without wear after 800 000 cycles. This C‐DC‐TENG is faultlessly competent for powering 2784 LEDs in series and 25 parallel‐connected hygrothermographs continuously. This work provides a promising technique for large‐scale clean energy harvesting, accelerating the progress toward practical applications of DC‐TENG. [ABSTRACT FROM AUTHOR]