46 results on '"Yang, Zhengbao"'
Search Results
2. Distributed-parameter modeling and dynamic analysis of rotational compressive-mode energy harvesters
- Author
-
Wang, Yilong, Yang, Zhengbao, and Cao, Dengqing
- Published
- 2021
- Full Text
- View/download PDF
3. VIV array for wind energy harvesting.
- Author
-
Chen, Shilei, Wang, Yuanyi, Song, Rujun, Gao, Yongsheng, Wang, Zuankai, and Yang, Zhengbao
- Subjects
WIND power ,ENERGY harvesting ,FLUID-structure interaction ,VORTEX shedding ,PIEZOELECTRIC transducers ,WIND speed - Abstract
Harvesting energy from flow using vortex-induced vibration (VIV) piezoelectric transducers has gained significant attention in recent decades due to their advantages, such as simple structure, blade-less layout, and low maintenance costs. However, most existing studies have focused on designing and analyzing a single piezoelectric energy harvester (PEH), without investigating the fluid-structure interaction and coupling of multiple PEH arrays. Here, we conducted an experimental study using a 2 × 2 PEH array to investigate its dynamic response under different wind speeds and spacings. Results show that the output voltage of the PEH array increases as the vertical spacing decreases, and the maximum average output voltage of 20.6 V per PEH is obtained when the minimum vertical spacing, maximum horizontal spacing, and resonance wind speed conditions are met. Compared to a single PEH, the 2 × 2 array arrangement increases the average output voltage by up to 168%. Additionally, the average output power under the resistance of 1 MΩ increases by 629% to 4.3×10
−4 W per PEH, and the maximum output power increases by 792% to 5.3×10−4 . Experiments indicate that the vortex shedding coupling can induce higher vibration in a well-defined array, which paves a new way for developing bladeless wind farms. [ABSTRACT FROM AUTHOR]- Published
- 2024
- Full Text
- View/download PDF
4. Water droplet energy harvesting.
- Author
-
Lin, Zhiming and Yang, Zhengbao
- Subjects
ENERGY harvesting ,CLEAN energy ,POWER resources ,ENERGY consumption ,TECHNOLOGICAL innovations - Abstract
Harnessing abundant kinetic water energy in diverse forms of river flows, ocean waves, tidal currents, raindrops, and others, is highly attractive to ease the energy crisis and satisfy the demands of scattered sensor network nodes in the Internet of things. Among them, raindrops, widely and ubiquitously distributed in nature and ambient living life, have been extensively explored and regarded as significant renewable energy carriers. Extensive efforts have been made to investigate droplet‐based electricity nanogenerators in fundamental mechanism, performance, and applications for achieving sustainable energy demands of the rapidly developing society over the past decade. In this review, we introduce the remarkable progress in this field and discuss the fundamental mechanisms of droplet energy harvesting technology for achieving high‐power generation. More significantly, a systematic review of droplet energy harvesting in different two‐phase interfaces, including liquid–solid, liquid–liquid, and liquid–gas interfaces, is provided. Finally, this survey reveals that droplet‐based electricity generators present vast potential in the power supply. At the same time, several development challenges and prospective solutions are discussed to spur future technological advancements. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
5. High‐Performance and Durable Rotational Triboelectric Nanogenerator Leveraging Soft‐Contact Coplanar Charge Pumping Strategy.
- Author
-
Lv, Shaobo, Li, Hongyun, Xie, Yiyuan, Zhang, Binbin, Liu, Bochao, Yang, Jin, Guo, Hengyu, Yang, Zhengbao, and Lin, Zhiming
- Subjects
ON-chip charge pumps ,TRIBOELECTRICITY ,ELECTROSTATIC induction ,ENERGY harvesting ,POWER electronics ,MECHANICAL energy ,CHARGE injection - Abstract
The triboelectric nanogenerator (TENG) represents a burgeoning approach for harvesting ambient mechanical energy. However, practical applications suffer from the issues of insufficient charge density and material abrasion. Here, a rotational TENG that attains exceptional output performance and durability in mechanical energy harvesting and couples an ingenious coplanar charge pump by soft contact with a suspended electrostatic induction mode is presented. Thanks to the continuous and synchronous charge injection from the central charge pumping unit, the charge density can be up to 74.62 µC m−2, resulting in an outstanding peak power density of 20.72 W m−2. Moreover, the utilization of yielding polyester fur in the charge pumping unit as a tribo‐layer for soft contact decreases the material abrasion and then enhances durability and robustness. And the experimental results show that the TENG can maintain 99.2% electrical output after 100 000 operating cycles. With the optimized design, the prototype can continuously drive four commercial lamps rated 12 W in series. Furthermore, a wireless powering system is demonstrated to power the electronics, demonstrating an extensive application of the TENG. Given the compelling characteristics, this work is expected to provide a sound strategy for improving TENGs' output and durability in the field of self‐powered sensor systems. [ABSTRACT FROM AUTHOR]
- Published
- 2023
- Full Text
- View/download PDF
6. Fast and versatile electrostatic disc microprinting for piezoelectric elements.
- Author
-
Li, Xuemu, Zhang, Zhuomin, Peng, Zehua, Yan, Xiaodong, Hong, Ying, Liu, Shiyuan, Lin, Weikang, Shan, Yao, Wang, Yuanyi, and Yang, Zhengbao
- Subjects
LEAD zirconate titanate films ,PIEZOELECTRIC thin films ,LEAD zirconate titanate ,ENERGY harvesting ,METAL nanoparticles ,BIOMOLECULES ,LEAD titanate - Abstract
Nanoparticles, films, and patterns are three critical piezoelectric elements with widespread applications in sensing, actuations, catalysis and energy harvesting. High productivity and large-area fabrication of these functional elements is still a significant challenge, let alone the control of their structures and feature sizes on various substrates. Here, we report a fast and versatile electrostatic disc microprinting, enabled by triggering the instability of liquid-air interface of inks. The printing process allows for fabricating lead zirconate titanate free-standing nanoparticles, films, and micro-patterns. The as-fabricated lead zirconate titanate films exhibit a high piezoelectric strain constant of 560 pm V
−1 , one to two times higher than the state-of-the-art. The multiplexed tip jetting mode and the large layer-by-layer depositing area can translate into depositing speeds up to 109 μm3 s−1 , one order of magnitude faster than current techniques. Printing diversified functional materials, ranging from suspensions of dielectric ceramic and metal nanoparticles, to insulating polymers, to solutions of biological molecules, demonstrates the great potential of the electrostatic disc microprinting in electronics, biotechnology and beyond. In this work, authors demonstrate a fast and versatile microprinting technique to produce high-performance and customizable piezoelectric elements by employing a conductive spiny disc to electrostatically trigger instability to the liquid-air interface of the ink. [ABSTRACT FROM AUTHOR]- Published
- 2023
- Full Text
- View/download PDF
7. Modeling and experimental validation of a buckled compressive-mode piezoelectric energy harvester
- Author
-
Li, Hai Tao, Qin, Wei Yang, Zu, Jean, and Yang, Zhengbao
- Published
- 2018
- Full Text
- View/download PDF
8. Metamaterial beam for flexural wave resonance rainbow trapping and piezoelectric energy harvesting.
- Author
-
Wang, Biao, Huang, Yang, Zhou, Weijian, and Yang, Zhengbao
- Subjects
ENERGY harvesting ,RAINBOWS ,HARVESTING ,RESONANCE ,TRAPPING ,RESONANCE frequency analysis ,UNIT cell ,POTENTIAL energy - Abstract
The rainbow trapping effect demonstrates great potential in multiple-band energy harvesting. However, the existing finite-size devices with the rainbow trapping phenomenon hardly harvest energy efficiently due to the mismatch between rainbow trapping frequencies and resonance frequencies of the devices. In this study, for the first time, we report a periodically perforated metamaterial beam, which achieves both the flexural wave rainbow trapping and resonance simultaneously for the multiple-band and multiple-position energy harvesting. The band structure of the unit cell in the metamaterial beam is analyzed to illustrate its ability to realize strong dispersion and energy concentration. The study first indicates that the rainbow trapping effect activated by resonance frequencies causes much more intense spatial separation and localization of flexural waves compared with that by cutoff frequencies for the periodically perforated bare beam. We, then, demonstrate that the resonance rainbow trapping phenomenon allows the proposed design to show superiority in piezoelectric energy harvesting compared with the counterpart with off-resonance rainbow trapping. Simulations indicate that the optimal resistance and the highest output power vary much for different pairs of piezoelectric patches at the corresponding resonance rainbow frequencies; by contrast, the positions of piezoelectric patches have little influence on the performance of the device. The design concept of on-resonance rainbow trapping in metamaterials in this study will help engineers to open a new venue for high-performance piezoelectric energy harvesters. [ABSTRACT FROM AUTHOR]
- Published
- 2021
- Full Text
- View/download PDF
9. Perspective on Development of Piezoelectric Micro-Power Generators.
- Author
-
Wang, Zehuan, Liu, Shiyuan, Yang, Zhengbao, and Dong, Shuxiang
- Subjects
PIEZOELECTRIC devices ,CLIMATE change ,ENERGY consumption ,ENERGY demand management ,ELECTRIC power - Abstract
Anthropogenetic environmental deterioration and climate change caused by energy production and consumption pose a significant threat to the future of humanity. Renewable, environmentally friendly, and cost-effective energy sources are becoming increasingly important for addressing future energy demands. Mechanical power is the most common type of external energy that can be converted into useful electric power. Because of its strong electromechanical coupling ability, the piezoelectric mechanism is a far more successful technique for converting mechanics energy to electrical energy when compared to electrostatic, electromagnetic, and triboelectric transduction systems. Currently, the scientific community has maintained a strong interest in piezoelectric micro-power generators because of their great potential for powering a sensor unit in the distributed network nodes. A national network usually has a large mass of sensor units distributed in each city, and a self-powered sensor network is eagerly required. This paper presents a comprehensive review of the development of piezoelectric micro-power generators. The fundamentals of piezoelectric energy conversion, including operational modes and working mechanisms, are introduced. Current research progress in piezoelectric materials including zinc oxide, ceramics, single crystals, organics, composite, bio-inspired and foam materials are reviewed. Piezoelectric energy harvesting at the nano- and microscales, and its applications in a variety of fields such as wind, liquid flow, body movement, implantable and sensing devices are discussed. Finally, the future development of multi-field coupled, hybrid piezoelectric micropower generators and their potential applications are discussed. [ABSTRACT FROM AUTHOR]
- Published
- 2023
- Full Text
- View/download PDF
10. Self-Powered Single-Inductor Rectifier-Less SSHI Array Interface With the MPPT Technique for Piezoelectric Energy Harvesting.
- Author
-
Long, Zhihe, Li, Pengyu, Chen, Jun, Chung, Henry, and Yang, Zhengbao
- Subjects
ENERGY harvesting ,ELECTRIC charge ,ELECTRIC current rectifiers ,SWITCHING circuits ,HYSTERESIS ,TOPOLOGY - Abstract
Piezoelectric energy harvester (PEH) arrays are practical solutions to the low and unreliable power output of a single PEH. However, most PEH circuits are developed for addressing the one-channel ac input from a single PEH. In this article, an extensible rectifier-less synchronized switch harvesting on inductor (ReL-SSHI) array interface with the maximal power point tracking (MPPT) function to manage the multiple ac inputs from the PEH arrays is designed. The ac–dc conversion is performed by the ReL-SSHI topology with passive peak switches featured with self-powered characteristic and fast cold-start. Only one shared inductor is employed, greatly reducing the circuit volume and cost. The MPPT module for each channel is implemented by a simple envelope detector and an ultra-low power hysteresis controller and achieves continuous energy extraction by adapting the fractional normal-operation voltage method. A developed discrete array interface able to handle three PEHs effectively executes the MPPT for each channel with the uphill and downhill response speeds of 2.0 and 7.1 V/s, and a maximal MPPT efficiency of 97.1%. This circuit boosts the power output by 485% compared with that by the traditional full-bridge rectifier, around 33% higher than that from existing synchronous electric charge extraction array interfaces. [ABSTRACT FROM AUTHOR]
- Published
- 2022
- Full Text
- View/download PDF
11. A Self-Powered P-SSHI Array Interface for Piezoelectric Energy Harvesters With Arbitrary Phase Difference.
- Author
-
Long, Zhihe, Li, Pengyu, Wang, Xiudeng, Wang, Biao, Chung, Henry Shu-Hung, and Yang, Zhengbao
- Subjects
INTERFACE circuits ,ELECTRICAL energy ,ELECTRIC charge ,ENERGY harvesting ,SWITCHING circuits - Abstract
Piezoelectric energy harvester (PEH) arrays are promising in many application scenarios. However, few interface circuits have been developed to manage the multiple ac inputs from PEHs. This article proposes an extensible parallel synchronized switch harvesting on inductor array interface scheme to realize a multiinput conversion from PEH arrays. We develop a split-inductor-capacitor topology that can extract electrical energy from multiple PEHs. The proposed circuit topology effectively handles the inductor access conflict in the cases of PEHs with close, identical, and opposite vibration phases, insensitive to ac input phase changes. For demonstrating the capability of dealing with multiple ac inputs from PEHs and the enhancement effect on power output, we construct and test a self-powered three-channel array circuit with the passive peak detection function. Excited by sinusoidal vibrations, our circuit effectively avoids the energy return and efficiently achieves the power combination of the three PEHs. Compared with the classic full-bridge circuit, the proposed circuit helps increase the power output by 4.8 times. Also, to show the universality of the circuit, the circuit's operation under various excitations istested and analyzed. [ABSTRACT FROM AUTHOR]
- Published
- 2022
- Full Text
- View/download PDF
12. Whisk-Inspired Motion Converter for Ocean Wave Energy Harvesting.
- Author
-
Pan, Qiqi, Wang, Biao, Zhang, Lingling, Li, Zhongjie, and Yang, Zhengbao
- Abstract
Inspired by hand push whisk blenders that are widely used in the kitchen, we here propose an energy harvester that enables conversion of low-frequency translational vibration to high-speed rotations and further generates electricity via the electromagnetic effect. The whisk-inspired energy harvester (W-EH) is composed of an internal thread sleeve, an external thread driving shaft, a spring, and a buoy. Compared with transmission approaches used by the electromagnetic power generators, the proposed design has the superiority of low cost, ultralow operation frequency (lower than 1 Hz), and high-power output. Tests in water indicate that the normalized power density is 300% higher than state of the art. Excited by mimicking ocean waves at 1.5 Hz, the W-EH prototype generates a maximum power of 64.4 mW and succeeds in lighting up 115 LEDs simultaneously, whose power is enough for continuous operations of most wireless sensors. [ABSTRACT FROM AUTHOR]
- Published
- 2022
- Full Text
- View/download PDF
13. Hierarchically Interconnected Piezoceramic Textile with a Balanced Performance in Piezoelectricity, Flexibility, Toughness, and Air Permeability.
- Author
-
Hong, Ying, Wang, Biao, Long, Zhihe, Zhang, Zhuomin, Pan, Qiqi, Liu, Shiyuan, Luo, Xiaowei, and Yang, Zhengbao
- Subjects
PERMEABILITY ,PIEZOELECTRIC materials ,ENERGY harvesting ,ELECTROTEXTILES ,FLEXIBLE electronics ,PIEZOELECTRICITY - Abstract
Softening of piezoelectric materials facilitates the development of flexible wearables and energy harvesting devices. However, as one of the most competitive candidates, piezoelectric ceramic-polymer composites inevitably exhibit reduced power-generation capability and weak mechanical strength due to the mismatch of strength and permittivity between the two phases inside. Herein a flexible, air-permeable, and high-performance piezoceramic textile composite with a mechanically reinforced hierarchical porous structure is introduced. Based on a template-assisted sol-gel method, a three-order hierarchical ceramic textile is constructed by intertwining submillimeter-scale multi-ply ceramic fibers that are further formed by twisting micrometer-scale one-ply ceramic fibrils. Theoretical analysis indicates that large mechanical stress can be easily induced in the multi-order hierarchical structure, which greatly benefits the electrical output. Fabricated samples generate an opencircuit voltage of 128 V, a short-circuit current of 120 μA, and an instantaneous power density of 0.75 mW cm-2, much higher than the previously reported works. The developed multi-order and 3D-interconnected piezoceramic textile shows satisfactory piezoelectricity (d33 of 190 pm V-1), air permeability (45.1 mm s-1), flexibility (Young's modulus of 0.35 GPa), and toughness (0.125 MJ m-3), collectively. The design strategy of obtaining balanced properties promotes the practicality of smart/functional materials in wearables and flexible electronics. [ABSTRACT FROM AUTHOR]
- Published
- 2021
- Full Text
- View/download PDF
14. Recent Advances towards Ocean Energy Harvesting and Self‐Powered Applications Based on Triboelectric Nanogenerators.
- Author
-
Shen, Fan, Li, Zhongjie, Guo, Hengyu, Yang, Zhengbao, Wu, Hao, Wang, Min, Luo, Jun, Xie, Shaorong, Peng, Yan, and Pu, Huayan
- Subjects
WATER power ,SOLID-solid interfaces ,OCEAN ,SOLID-liquid interfaces ,ENERGY harvesting ,ENERGY conversion - Abstract
Ocean contain abundant clean energies including tidal and wave, but such energies are known for low frequency and large excitation amplitude, posing considerable challenges for high‐efficiency energy conversion. As an emerging technology, triboelectric nanogenerators (TENGs) have been widely used in energy harvesting and novel sensor design due to their high sensitivity and flexible structure. Meanwhile, they show great advantages in the low‐frequency environment (<5 Hz), and display great potential for deployment in remote ocean waters, and construction of large‐scale TENG networks. In this review, firstly, the working principle of TENGs and various configurations developed for the marine environment are introduced, which mainly include solid–solid and solid–liquid interfaces. Then, from the viewpoint of power improvement, authors are most concerned about the modification methods of materials such as surface modification, electron injection, and chemical doping. Meanwhile, improved technologies for energy harvesters in marine environment are discussed in detail, such as improving the hydrophobicity and degradation of materials, studying the self‐healing ability of materials, and designing power management circuits. Finally, the current challenges are summarized, and research trends are given from both short‐term and long‐term perspectives. [ABSTRACT FROM AUTHOR]
- Published
- 2021
- Full Text
- View/download PDF
15. Self-Powered SSDCI Array Interface for Multiple Piezoelectric Energy Harvesters.
- Author
-
Long, Zhihe, Wang, Xiudeng, Li, Pengyu, Wang, Biao, Zhang, Xingqi, Chung, Henry Shu-Hung, and Yang, Zhengbao
- Subjects
ELECTRIC charge ,INTERFACE circuits ,INTERNET of things ,PIEZOELECTRIC devices ,ENERGY harvesting ,SWITCHING circuits - Abstract
To merge the gap between the low-power output of piezoelectric energy harvesters (PEHs) and the high-power demand of sensors of Internet of Things, researchers recently start to explore PEHs arrays. However, few circuits have been developed to manage the multiple ac inputs from PEHs arrays. This article presents a self-powered PEH array interface circuit based on the synchronized switching and discharging to a storage capacitor through an inductor (SSDCI) technique. The array interface can output a maximum total power greater than the sum of each individual peak power, and achieve a high efficiency when multiple PEHs connect to the SSDCI array circuit. Simulation and experiment are performed to demonstrate the advantages of the SSDCI array interface. The tested results show that the designed SSDCI array circuit achieves an efficiency of 82.3% with three input sources, and allows a gain up to 300% in terms of maximal output power compared to the full-bridge rectifier. In addition, only the peak detection is utilized for the switching control; therefore, the SSDCI array circuit is realized more easily and with fewer components compared to the existing synchronous electric charge extraction array interfaces. [ABSTRACT FROM AUTHOR]
- Published
- 2021
- Full Text
- View/download PDF
16. Vortex-induced swing (VIS) motion for energy harvesters and flowmeters.
- Author
-
Gong, Ying, Shan, Xiaobiao, Hu, Hong, Xie, Tao, and Yang, Zhengbao
- Subjects
ROTATIONAL motion ,PERIODIC motion ,MOTION ,ENERGY harvesting ,FLOW velocity - Abstract
Vortex-induced vibration (VIV) has been widely studied in the fields of vibration control, building construction, and underwater vehicles. Recently, researchers began utilizing the VIV phenomenon for flow energy harvesting. Here, we describe that vortex shedding causes periodic rotational motions and explore these vortex-induced swing (VIS) motions for harvesting flow energy and measuring flow speed. An arc-bluff structure was constructed to enlarge the VIS motions, and a phenomenological model was developed using the Van der Pol equation. Swing characteristics when flow velocities were in the range of (0.15, 0.45) m/s were assessed. Experiments showed that the maximum swing amplitude of the device is 120°, and it converges to 80° as the water velocity increases. The frequency, amplitude, and initial angle curve of the VIS device can be used to represent the water speed vector. The proposed flowmeter showed a flow rate sensitivity of 7∼10 Hz/(m·s
−1 ) in the experimental range. Energy harvester prototypes demonstrated a peak-peak output of 3.28 V in water with a velocity of 0.45 m/s. The present work provides an approach for the flow measurement and energy harvesting under low-speed and low-frequency conditions. [ABSTRACT FROM AUTHOR]- Published
- 2020
- Full Text
- View/download PDF
17. SLIPS-TENG: robust triboelectric nanogenerator with optical and charge transparency using a slippery interface.
- Author
-
Xu, Wanghuai, Zhou, Xiaofeng, Hao, Chonglei, Zheng, Huanxi, Liu, Yuan, Yan, Xiantong, Yang, Zhengbao, Leung, Michael, Zeng, Xiao Cheng, Xu, Ronald X, and Wang, Zuankai
- Subjects
TRIBOELECTRICITY ,WAVE energy ,ENERGY harvesting ,KINETIC energy ,LIQUID films ,CHARGE transfer - Abstract
Energy harvesting devices that prosper in harsh environments are highly demanded in a wide range of applications ranging from wearable and biomedical devices to self-powered and intelligent systems. Particularly, over the past several years, the innovation of triboelectric nanogenerators (TENGs) that efficiently convert ambient kinetic energy of water droplets or wave power to electricity has received growing attention. One of the main bottlenecks for the practical implications of such devices originates from the fast degradation of the physiochemical properties of interfacial materials under harsh environments. To overcome these challenges, here we report the design of a novel slippery lubricant-impregnated porous surface (SLIPS) based TENG, referred to as SLIPS-TENG, which exhibits many distinctive advantages over conventional design including optical transparency, configurability, self-cleaning, flexibility, and power generation stability, in a wide range of working environments. Unexpectedly, the slippery and configurable lubricant layer not only serves as a unique substrate for liquid/droplet transport and optical transmission, but also for efficient charge transfer. Moreover, we show that there exists a critical thickness in the liquid layer, below which the triboelectric effect is almost identical to that without the presence of such a liquid film. Such an intriguing charge transparency behavior is reminiscent of the wetting transparency and van der Waals potential transparency of graphene previously reported, though the fundamental mechanism remains to be elucidated. We envision that the marriage of these two seemingly totally different arenas (SLIPS and TENG) provides a paradigm shift in the design of robust and versatile energy devices that can be used as a clean and longer-lifetime alternative in various working environments. [ABSTRACT FROM AUTHOR]
- Published
- 2019
- Full Text
- View/download PDF
18. Introducing hinge mechanisms to one compressive-mode piezoelectric energy harvester.
- Author
-
Li, Zhongjie, Zu, Jean, and Yang, Zhengbao
- Subjects
PIEZOELECTRIC devices ,ENERGY harvesting ,POWER resources ,PROTOTYPES ,BANDWIDTHS - Abstract
In this paper, a hinge mechanism is introduced into one compressive-mode piezoelectric energy harvester to improve its performance. First, the concept of implementing hinge mechanisms is introduced on a high-efficiency compressive-mode piezoelectric energy harvester (HC-PEH). Second, a numerical model based on the piezoelectric constitutive equation and the Duffing oscillator equations is formulated to obtain voltage responses, velocity responses, and the fundamental frequency and bandwidth. Then, a prototype is fabricated to validate the results of the model. Depending on the number of hinges applied to the HC-PEH, three cases are investigated: fully hinged, partially hinged, and clamped. In both numerical modeling and experimental studies, the HC-PEH prototypes in the three cases are exposed to frequency-sweep excitations to illustrate the dynamic and transduction behaviors. The results demonstrate that the overall performance in the hinged cases is improved significantly compared to that in the clamped case. The output voltage and output power are increased by 2–3 times and up to 5 times, respectively, and fundamental resonant frequency is lowered to below 20 Hz. Furthermore, it is shown that the operational bandwidth is widened by up to 37%. [ABSTRACT FROM AUTHOR]
- Published
- 2018
- Full Text
- View/download PDF
19. Enhanced broadband multi-mode compliant orthoplanar spring piezoelectric vibration energy harvester using magnetic force.
- Author
-
Dhote, Sharvari, Yang, Zhengbao, Behdinan, Kamran, and Zu, Jean
- Subjects
- *
PIEZOELECTRIC devices , *VIBRATION tests , *ENERGY harvesting , *MAGNETIC fields , *BANDWIDTHS , *EQUIPMENT & supplies - Abstract
We proposed a nonlinear multi-mode tri-leg compliant orthoplanar spring piezoelectric vibration-based energy harvester (COPS-PVEH), which provided the improved performance using a pure geometric nonlinearity, in terms of a wide bandwidth, and a high-voltage output in forward and reverse sweeps. This paper presents an application of magnetic force interaction to further enhance the performance of the COPS-PVEH. A repulsive magnetic force is added to the spring to change the harvester system’s stiffness. A lumped parameter model is derived and analytically solved for the designed harvester with a magnetic coupling. The experiments are carried out by adding a moving magnet at the center of the spring and a pair of fixed magnets at the top and bottom sides of the harvester. Both experimental data and simulation results show the benefits brought through the dynamics of a magnetic oscillator. In an experiment by adding magnetic force, a slight increase is observed in the operating bandwidth and a 10% increase in the magnitude of voltage output is achieved at the same excitation level. The magnetic interaction on the COPS-PVEH with an addition of multiple masses has also achieved an increase in voltage output and bandwidth. In addition, the gap between the three vibration modes has been reduced. [ABSTRACT FROM AUTHOR]
- Published
- 2018
- Full Text
- View/download PDF
20. Charging capacitors using single crystal PMN-PT and PZN-PT energy harvesters coupled with the SSHI circuit.
- Author
-
Yang, Zhengbao, Qin, Zhaoye, and Zu, Jean
- Subjects
- *
CAPACITORS , *SINGLE crystals , *PIEZOELECTRIC materials , *HARVESTING machinery , *ENERGY harvesting , *LEAD zirconate titanate - Abstract
Piezoelectric energy harvesting technology is regarded as a remedy to the short-life battery issue in low-power electronic devices, and has been extensively studied in the past two decades. Although a variety of new structures and mechanisms have been proposed for piezoelectric energy harvesters (PEHs), there is not much progress made on the piezoelectric materials that play a determinant role in PEHs performance. Most energy harvesters are still constructed with lead zirconate titanate (PZT). Recently, the new-generation piezoelectric materials PMN-PT and PZN-PT single crystals are proposed and start to be used in transducers. Their electromechanical coupling factor ( k 33 ) is over 90%, and the piezoelectric coefficient ( d 33 ) can reach three times of that of PZT. This study characterizes the PMN-PT and PZN-PT single crystals used in energy harvesters, compared with the polycrystalline PZT, in terms of charging capacitors. Systematic discussions are presented on the voltage, power and energy responses, as well as the reverse coupling effect on the mechanical response and the self-discharge effect of capacitors. Furthermore, a self-powered synchronized switch harvesting on inductor (SSHI) circuit is constructed and tested with the new single-crystal based energy harvesters. Experiments indicate that PMN-PT and PZN-PT can significantly boost the charging capability of energy harvesters, and that performance can be further enhanced by the SSHI circuit. [ABSTRACT FROM AUTHOR]
- Published
- 2017
- Full Text
- View/download PDF
21. Achilles' new heel: Shock absorbing, gait assisting and energy harvesting.
- Author
-
Pan, Qiqi, Long, Zhihe, Zhang, Zhuomin, Lin, Weikang, Zhang, Lingling, Bai, Songnan, Yang, Xiaodan, Liu, Shiyuan, Park, Yong-Lae, Chirarattananon, Pakpong, and Yang, Zhengbao
- Abstract
Humans have evolved to walk highly efficiently to conserve energy, making it challenging to develop assistive and energy-harvesting devices for walking. Herein, we report a heel pad-based assistance device for walking that not only optimizes the energetic economy of walking and prevents plantar fasciitis but also harvests energy from heel impact. Our footwear-embedded device improves the walking economy by offering shock absorption and walking assistance, while simultaneously providing energy-harvesting functions. We demonstrate that the use of our device reduces the activation of the gastrocnemius and soleus muscles during the foot strike by 5.8 ± 1.0 % and 4.1 ± 0.6 %, respectively. The collisional energy conserved from the impact at the touchdown is transformed into 3.8 ± 0.3 watts of electrical power (mean ± SEM). Compared with walking in normal shoes, the energy savings with the device imply that walking endurance could be increased by as much as 10 % without extra effort from the wearer. Our findings demonstrate the potential of the heel pad-based device that enhances the energy economy of walking and human bipedal locomotion. [Display omitted] • Highly integrated footwear for shock absorbing, gait assisting, and energy harvesting. • A power density of 27.5 mW/cm
3 (peak power: 3.8 Watts) is achieved for a single step. • Walking with the device does not significantly interfere with the normal gait pattern. • The footwear device shows stable durability and robustness in daily locomotion. [ABSTRACT FROM AUTHOR]- Published
- 2023
- Full Text
- View/download PDF
22. Introducing arc-shaped piezoelectric elements into energy harvesters.
- Author
-
Yang, Zhengbao, Wang, Yan Qing, Zuo, Lei, and Zu, Jean
- Subjects
- *
PIEZOELECTRICITY , *FINITE element method , *HARVESTING machinery , *ELECTRONIC equipment , *ENERGY harvesting - Abstract
Piezoelectric energy harvesting is envisioned as an ideal complement to batteries for long-life operation of wireless or remote electronic devices. Most piezoelectric energy harvesters (PEHs) utilize piezoelectric plates or discs as the energy transducing elements, and they cannot generate enough power for most potential applications. In this study, we explore a new way of using arc-shaped piezoelectric patches as the core transducing elements in energy harvesters to improve their performance. An analytical model is developed via the Castigliano’s theorem to elucidate the low stiffness characteristic of the arc-shaped structure. A finite element analysis is conducted, and the results indicate that high and evenly-distributed stress can be easily induced in the arc-shaped PEHs. Prototypes are fabricated with arc-shaped piezoelectric elements and flat piezoelectric plates, respectively, and tested under the same conditions. The experimental data demonstrate that the arc-shaped PEHs are capable of generating 2.55–4.25 times as much power as the equivalent flat-plate PEHs. This study lays the foundation to enhance energy harvester performance by utilizing arc-shaped piezoelectric structures. [ABSTRACT FROM AUTHOR]
- Published
- 2017
- Full Text
- View/download PDF
23. A multi-impact frequency up-converted magnetostrictive transducer for harvesting energy from finger tapping.
- Author
-
Yang, Zhengbao, Tan, Yimin, and Zu, Jean
- Subjects
- *
MAGNETOSTRICTIVE transducers , *MACHINABILITY of metals , *VIBRATION tests , *RESONANCE , *COUPLINGS (Gearing) , *MAGNETIC coupling - Abstract
Vibration energy harvesting has been a research subject of growing interest over the past few years, and is envisaged as a remedy to the unsatisfactory battery issue in low-power electronic devices. In this study, we propose a new magnetostrictive transducer to harvest energy from finger tapping. Galfenol is selected as the transducing material due to its high piezomagnetic coefficient and excellent machinability. To effectively harness energy in low-frequency conditions, we develop a frequency up-conversion mechanism that succeeds in converting vibration below 10 Hz from finger tapping up to the system's resonance of a few hundred Hz. Furthermore, multiple impacts are induced in each working cycle deliberately to boost the efficiency. A comprehensive model is built and solved to analyze the mechanical-magnetic-electrical coupling system. Based on the model, we elucidate the design criteria for high-performance magnetostrictive transducers. A prototype is fabricated with a Galfenol beam of 0.5 × 5 × 25 mm 3 and, under finger tapping, it generates 5.3 mW power and instantaneously lights up 10 commercial LEDs and a numeric LCD. [ABSTRACT FROM AUTHOR]
- Published
- 2017
- Full Text
- View/download PDF
24. Modeling and parametric study of a force-amplified compressive-mode piezoelectric energy harvester.
- Author
-
Yang, Zhengbao, Zu, Jean, Luo, Jun, and Peng, Yan
- Subjects
PIEZOELECTRICITY ,ENERGY harvesting ,ELECTRIC power ,WAVE amplification ,BANDWIDTHS - Abstract
Piezoelectric energy harvesters have great potential for achieving inexhaustible power supply for small-scale electronic devices. However, the insufficient power-generation capability and the narrow working bandwidth of traditional energy harvesters have significantly hindered their adoption. To address these issues, we propose a nonlinear compressive-mode piezoelectric energy harvester. We embedded a multi-stage force amplification mechanism into the energy harvester, which greatly improved its power-generation capability. In this article, we describe how we first established an analytical model to study the force amplification effect. A lumped-parameter model was then built to simulate the strong nonlinear responses of the proposed energy harvester. A prototype was fabricated which demonstrated a superior power output of 30 mW under an excitation of 0.3g (
g = 9 . 8 m/s2 ). We discuss at the end the effect of geometric parameters that are influential to the performance. The proposed energy harvester is suitable to be used in low-frequency weak-excitation environments for powering wireless sensors. [ABSTRACT FROM AUTHOR]- Published
- 2017
- Full Text
- View/download PDF
25. Comparison of PZN-PT, PMN-PT single crystals and PZT ceramic for vibration energy harvesting.
- Author
-
Yang, Zhengbao and Zu, Jean
- Subjects
- *
LEAD zirconate titanate , *SINGLE crystals , *ENERGY harvesting , *CERAMIC materials , *VIBRATION (Mechanics) - Abstract
Vibration energy harvesting has a great potential to achieve self-powered operations for wireless sensors, wearable devices and medical electronics, and thus has attracted much attention in academia and industry. The majority of research into this subject has focused on the piezoelectric effect of synthetic materials, especially the perovskite PZT ceramics. Recently the new-generation piezoelectric materials PMN-PT and PZN-PT single crystals have gained significant interest because of their outstanding piezoelectric properties. They can be used to replace the widely-adopted PZT ceramics for improving energy harvesters’ performance substantially. However, there is little research on comparing PMN-PT and PZN-PT energy harvesters against PZT harvesters. In this paper, we present a systematic comparison between vibration energy harvesters using the PMN-PT, PZN-PT single crystals and those using the PZT ceramics. Key properties of the three materials are summarized and compared. The performance of the PMN-PT and PZN-PT energy harvesters is characterized under different conditions (beam length, resistance, frequency, excitation strength, and backward coupling effect), and is quantitatively compared with the PZT counterpart. Furthermore, the effect of the synchronized switch harvesting on inductor (SSHI) circuit on the three harvesters is discussed. The experimental results indicate that energy harvesters using the PMN-PT and PZN-PT single crystals can significantly outperform those using the PZT ceramics. This study provides a strong base for future research on high-performance energy harvesters using the new PMN-PT and PZN-PT single crystals. [ABSTRACT FROM AUTHOR]
- Published
- 2016
- Full Text
- View/download PDF
26. Reversible Nonlinear Energy Harvester Tuned by Tilting and Enhanced by Nonlinear Circuits.
- Author
-
Yang, Zhengbao, Zu, Jean, and Xu, Zhuo
- Abstract
Nonlinear vibration is capable of effectively extending the frequency bandwidth of energy harvesters. Either hardening or softening nonlinearity has been used in various designs to achieve broad-bandwidth energy harvesting. In this paper, we propose a new method to achieve reversible hysteretic responses, i.e., both hardening and softening nonlinear responses, mechanically without additional magnetic interactions. This tunable nonlinearity endows energy harvesters with a great adaptability to environment. The proposed energy harvester is composed of a flexural center and two mass blocks, supported by a pair of elastic rods that are fixed on a vibration base. Different nonlinear responses are invoked by tilting the fixed–fixed elastic rods at different angles. A lumped-parameter model is developed to simulate the nonlinear electromechanical coupling system, and that is analytically solved by virtue of the high-order perturbation technique. The dynamic responses under different frequencies and accelerations are analytically characterized and compared well with the experimental data measured from a fabricated prototype. Furthermore, a nonlinear conditioning circuit (self-powered series synchronized switch harvesting on inductor) is constructed and tested with the proposed nonlinear energy harvester, with which the performance is enhanced about 200% for both resistive loads and capacitive loads. [ABSTRACT FROM PUBLISHER]
- Published
- 2016
- Full Text
- View/download PDF
27. Toward Harvesting Vibration Energy from Multiple Directions by a Nonlinear Compressive-Mode Piezoelectric Transducer.
- Author
-
Yang, Zhengbao and Zu, Jean
- Abstract
We propose a new concept for harvesting vibration energy from multiple directions. Our approach effectively exploits the nonlinear vibration of a doubly clamped elastic rod, converting and amplifying excitations to compressive loads in piezoelectric materials. The proposed multidirectional compressive-mode piezoelectric energy harvester (MC-PEH) is capable of isotropically harnessing vibration energy from any angle in a plane. Meanwhile, the MC-PEH demonstrates a high-voltage output and a wide working bandwidth, along with the distinct softening nonlinear phenomena. Theoretical analysis and experimental testing are performed and exhibit good agreement over a range of excitation frequencies. This study enhances the practicability and adaptability of using energy harvesters in a complex environment. [ABSTRACT FROM PUBLISHER]
- Published
- 2016
- Full Text
- View/download PDF
28. High-efficiency compressive-mode energy harvester enhanced by a multi-stage force amplification mechanism.
- Author
-
Yang, Zhengbao and Zu, Jean
- Subjects
- *
ENERGY consumption , *ENERGY harvesting , *PIEZOELECTRIC materials , *PIEZOELECTRICITY , *NONLINEAR systems - Abstract
Harnessing ambient vibration energy using piezoelectric materials is a promising alternative solution to batteries to inexhaustibly power small-scale mobile devices. This paper presents an innovative energy harvester, named high-efficiency compressive-mode piezoelectric energy harvester (HC-PEH). It consists of a pair of elastic beams and a flex-compressive center where the piezoelectric element bears a dynamic compressive load. The compressive mode is preferred than the commonly-used bending mode and tensile mode due to the superior compressive strength of piezoceramics. To cater to the characteristic of piezoceramics: large ultimate stress, but extremely small ultimate strain, a multi-stage force amplification mechanism is developed in the design. The HC-PEH shows superior capability of high power output and favorable nonlinear phenomena at low frequency range. Under an acceleration of 0.5 g (g = 9.8 m/s 2 ), a maximum power of 19 mW is produced at 21 Hz, which is about one order of magnitude higher than the power output of energy harvesters previously reported. The capability of high power output of the HC-PEH demonstrates the practicability of using energy harvesters to power most of wireless sensors. [ABSTRACT FROM AUTHOR]
- Published
- 2014
- Full Text
- View/download PDF
29. A leaf-mimic rain energy harvester by liquid-solid contact electrification and piezoelectricity.
- Author
-
Xu, Xiaote, Wang, Yilong, Li, Pengyu, Xu, Wanghuai, Wei, Lei, Wang, Zuankai, and Yang, Zhengbao
- Abstract
Previous droplet-based electricity generator has made breakthroughs in efficient water energy harvesting through taking advantage of the contact electrification, however, the kinetic energy of water remains to be tapped into. In this work, we develop a leaf-mimic rain energy harvester (REH) that allows for the collection of electrostatic and kinetic energy simultaneously based on the synergy of the liquid-solid contact electrification and the piezoelectric effect. Impinged by a water droplet, the REH generates a boosted transferred charge value (101 nC) and high output power density (82.66 W m
−2 ). We also show that such performances enable the construction of self-charged wireless sensor systems with continuous operational capability. The REH is also low-cost and facile for fabrication, paving a new way towards high-efficiency power generation from raindrops as well as other water sources. [Display omitted] • A mechanism of harvesting energy from both the liquid-solid contact and kinetic motion inspired by the leaf-rain interaction. • A new explicit theoretical model that links key parameters on the liquid-solid contact electrification. • Continuous operation of a wireless sensor system powered by the proposed droplet energy harvesters. [ABSTRACT FROM AUTHOR]- Published
- 2021
- Full Text
- View/download PDF
30. Woodpecker-mimic two-layer band energy harvester with a piezoelectric array for powering wrist-worn wearables.
- Author
-
Wang, Biao, Long, Zhihe, Hong, Ying, Pan, Qiqi, Lin, Weikang, and Yang, Zhengbao
- Abstract
Wrist-worn smart devices such as smartwatches and wristbands are rapidly penetrating our daily life for health, security and fashion purposes. However, the battery-powered wearables have a limited lifetime and need to be frequently recharged, which degrades user experience and further poses environmental problems. Inspired by the structure of the woodpecker's head, this paper reports a bionic two-layer band piezoelectric energy harvester for self-powered smartwatches and wristbands. An inner band and an outer band of the harvester mimic two branches of the hyoid bone of the woodpecker. The energy harvesting unit employs a piezoelectric array structure. A finite element analysis is conducted to identify the optimal positions of piezoelectric patches in the array and an improved rectifier circuit is developed to manage the multiple AC inputs. We design two operation modes, i.e., movement mode and impact mode, to accommodate energy harvesters in different human activities. A maximum power output of 15.41 mW is achieved in experiments when tapping the prototype, corresponding to an equivalent power density of 1049.01 μW/cm
3 , around five times higher than previous wrist-worn harvesters. The design demonstrates its capability of continuously powering a watch and a screen during a normal walking process. The concept of shifting from the watch body to watch bands provides the design of energy harvesters a larger space and higher user-friendliness, which, fused with the piezoelectric array method, shows the potential to merge the gap of the power generation of energy harvesters and the power consumption of wrist wearables. [Display omitted] • Woodpecker-inspired two-layer band design for wrist-worn wearables. • A piezoelectric array structure as an energy harvesting unit. • Two working modes including movement mode and impact mode. • The maximum power output of 12.25 mW in the movement motion and 15.41 mW in the impact mode. • Able to continuously power a watch or a screen during normal walking. [ABSTRACT FROM AUTHOR]- Published
- 2021
- Full Text
- View/download PDF
31. On the offset distance of rotational piezoelectric energy harvesters.
- Author
-
Wang, Yilong, Yang, Zhengbao, and Cao, Dengqing
- Subjects
- *
HAMILTON-Jacobi equations , *HAMILTON'S principle function , *CENTRIFUGAL force , *MAGNETISM , *PIEZOELECTRIC devices , *DISTANCES , *ENERGY harvesting , *ELASTIC deformation - Abstract
The performance of vibration-based energy harvesters deteriorates when used in rotational environments with an offset distance. To address this issue, we propose a method of using magnets to improve the performance of the high-efficiency compressive-mode piezoelectric energy harvester (HC-PEH) with the offset configuration in rotational environments. The performance of the magnetically coupled rotational HC-PEH system with offset distances is experimentally studied. The results show the proposed method is feasible and significantly improves the performance (peak-peak voltage) by 254.2%. To attain comprehensive insight into the electromechanical behaviors of the system, we develop a theoretical model with consideration of nonlinear stiffness, nonlinear damping, and nonlinear piezoelectricity. The governing equations of the system are obtained by using Hamilton's principle and their approximate analytical solution is derived via the harmonic balance method. The simulation results closely render the experimental data and are used to characterize the system. Based on the developed theoretical model, a parametric study is performed and the results indicate that the best performance improvement can be obtained via tuning the parameters related to the magnetic force, the centrifugal force, and the initial deformation of the elastic beams. This work helps overcome a major obstacle for the application of rotational energy harvesting. • Verification on adverse effects of the offset distance in rotational environments. • A brand-new solution by using magnetic repulsion and its experimental verification. • The peak-peak voltage of the energy harvester shows a maximum increase by 254.2%. • Model of the magnetically coupled rotational HC-PEH system with offset distances. • Discussions on the dynamical characteristics of the system. [ABSTRACT FROM AUTHOR]
- Published
- 2021
- Full Text
- View/download PDF
32. Energy harvesting for jet engine monitoring.
- Author
-
Wang, Yilong, Yang, Zhengbao, Li, Pengyu, Cao, Dengqing, Huang, Wenhu, and Inman, Daniel J.
- Abstract
Sensors that provide critical information about jet engine performance are widely installed on static components but are rarely found on rotors because of their inaccessibility and extremely high rotation speeds. We present a new monitoring method, integrating energy harvesting technology with wireless sensors to achieve real-time self-powered engine monitoring. Energy harvesters, used to generate power from ambient vibration, are sustainable alternatives to batteries for achieving self-sustained long-term operation of electronic devices. By utilising structural nonlinearity, force amplification mechanism, and the piezoelectric effect, we show a 22.52-g energy harvester capable of high power output (78.87 mW), broad working bandwidth (22.5 Hz), and strong reliability (2100 RPM). Our approach breaks limitations from wired connections that are weighty and vulnerable to failures. We theoretically and experimentally analyse the nonlinear responses and demonstrate the harvester by constantly lighting 112 LEDs and a self-powered wireless sensor system in a jet engine. This work paves a new way for developing future monitoring systems for advanced jet engines and other rotating machinery applications. The self-powered wireless sensor system consists of an energy harvester as the power supply and a wireless sensor node as the communication device. When the jet engine operates, the energy harvester that installs on the rotational component generates power for the wireless sensor node and then the real-time monitoring information of the engine components will be sent wirelessly to a local area network (LAN) in the aircraft for working condition analysis and failure prediction. The energy harvester of the monitoring system exhibits great compatibility in the rotational environment of jet engines and excellent power generation capability (max. to 78.87 mW) and working bandwidth (22.5 Hz in 0–2100 RPM). A combination of such characteristics guarantees the realization of the self-powered and wireless operation of sensor systems in jet engines. Image 1 • A brand-new sensor architecture for real-time and self-powered jet engine monitoring. • A maximum output power 78.87 mW and efficiency 36.43%, capable of powering 112 LEDs simultaneously. • A demonstration of a self-powered wireless sensor system in jet engine components for the first time. • A comprehensive study on the compressive-mode piezoelectric energy harvester used in the rotational environment. • A comparative study the compressive-mode and bending-mode PEHs under vibration and rotational excitations. [ABSTRACT FROM AUTHOR]
- Published
- 2020
- Full Text
- View/download PDF
33. Capturing Flow Energy from Ocean and Wind.
- Author
-
Gong, Ying, Yang, Zhengbao, Shan, Xiaobiao, Sun, Yubiao, Xie, Tao, and Zi, Yunlong
- Subjects
- *
OCEAN energy resources , *ENERGY harvesting , *ENERGY conversion , *WINDS - Abstract
Flow-induced energy harvesting has attracted more and more attention among researchers in both fields of the wind and the fluid. Piezoelectric energy harvesters and triboelectric nanogenerators are exploited to obtain superior performance and sustainability, and the electromagnetic conversion has been continuously improved in the meantime. Aiming at different circumstances, researchers have designed, manufactured, and tested a variety of energy harvesters. In this paper, we analyze the state-of-the-art energy harvesting techniques and categorize them based on the working environment, application targets, and energy conversion mechanisms. The trend of research endeavors is analyzed, and the advantages, existing problems of energy harvesters, and corresponding solutions of energy harvesters are assessed. [ABSTRACT FROM AUTHOR]
- Published
- 2019
- Full Text
- View/download PDF
34. Multi-frequency responses of compliant orthoplanar spring designs for widening the bandwidth of piezoelectric energy harvesters.
- Author
-
Dhote, Sharvari, Li, Haitao, and Yang, Zhengbao
- Subjects
- *
ENERGY harvesting , *MODE shapes , *PIEZOELECTRIC materials , *FINITE element method , *BANDWIDTHS - Abstract
• Multiple nonlinear energy harvesters are developed based on compliant orthoplanar springs and piezoelectric materials. • Experiments with both harmonic and random excitations are performed. The proposed COPS harvesters could show an extended operational bandwidth in both conditions. • The study quantitatively demonstrates the effectiveness of interaction of multiple nonlinear vibration modes on harvester performance enhancement, and which effect can be tuned by the addition of multiple masses and spring legs. • The quad-leg design shows a broad bandwidth of 35 Hz while maintaining a voltage response of 4 V. This paper compares the performance of three nonlinear compliant orthoplanar springs, namely, bi-leg, quad-leg and pent-leg designs to study the vibration mode interaction effect for widening the operational bandwidth of piezoelectric vibration energy harvester. All the designs have three or more vibration modes below 150 Hz with the addition of multiple masses. Finite element analysis results of spring designs and vibration mode shapes are presented and compared with experiments. The prototypes were manufactured and experimentally tested to analyze their dynamic voltage-frequency responses and operational bandwidths under sinusoidal and band-limited excitations. The experimental results demonstrate that the operational bandwidth is significantly broadened by the geometric nonlinearity of the structure. The addition of multiple masses brings the vibration modes of the system closer, and thus further helps to extend the operational bandwidth. In addition, we introduce multiple piezoelectric plates into harvesters to enable energy harvesting in all vibration modes. The quad-leg design shows the largest frequency bandwidth of 35 Hz, maintaining a peak-to-peak voltage of 4 V under the forward frequency-sweep excitations. Under the reverse frequency-sweep excitations, the voltage response and the operational bandwidth are comparable to those of the forward-sweep ones as a result of continuous overlapping of linear and nonlinear voltage peaks. Random excitation experiments demonstrate the effectiveness of the proposed mutli-leg structure in harvesting energy from wideband environmental vibrations. [ABSTRACT FROM AUTHOR]
- Published
- 2019
- Full Text
- View/download PDF
35. A hybrid piezoelectric-triboelectric generator for low-frequency and broad-bandwidth energy harvesting.
- Author
-
Li, Zhongjie, Saadatnia, Zia, Yang, Zhengbao, and Naguib, Hani
- Subjects
- *
ENERGY harvesting , *PIEZOELECTRIC devices , *TRIBOELECTRICITY , *ELECTROSTATICS , *STATIC electricity - Abstract
Highlights • Hybridization of piezoelectric and triboelectric energy generators. • Bifurcation induced superharmonic resonances for low-frequency energy harvesting. • High power outputs with force amplification effect by a truss mechanism and impact. • Capability of harnessing energy from a broad frequency range. • Frequency up conversion approach for higher output power. Abstract In this paper, we report a hybrid generator to harness energy from low-frequency ambient vibrations. The generator is designed with a piezoelectric energy harvester (PEH) patch, a triboelectric nanogenerator (TENG) patch, a spring-mass system and an amplitude limiter. The spring-mass system receives energy from excitations and applies forces to the piezoelectric element and the triboelectric layers. The unique amplitude limiter is deliberately introduced into the system, not only achieving the desired frequency up-conversion effect, but also boosting the voltage responses significantly. The limiter also causes hardening nonlinearity and dynamic bifurcation triggering superharmonic resonance so that the generator resonates at a frequency of about 3 Hz. Furthermore, the proposed PEH adopts the strong compressive operation mode, and employs a truss mechanism to effectively amplify the impact forces. In experiments, open-circuit voltages are 58.4 V from PEH and 60 V from TENG under an excitation of 1.0 g at resonance. The hybridized generator is capable of achieving a maximum power of 19.6 mW from the two sources with matched impedances. The working bandwidths of the PEH and the TENG reach up to 5.39 Hz and 7.25 Hz, respectively, out of our targeted frequency domain [2.5 Hz, 10 Hz] due to the multiple resonances and nonlinearity. In the applications to charge capacitors, the high saturation voltage and relatively short charging time validate the effectiveness of our power management technique. Furthermore, the generator proves to be able to effectively scavenge energy from human body motions and charge a capacitor of 4.7 μF to 7.6 V in around 50 s, which indicates a great potential of practical applications in wearable devices. [ABSTRACT FROM AUTHOR]
- Published
- 2018
- Full Text
- View/download PDF
36. Three-dimensional piezoceramic sheets via mold-assisted sintering as 3D energy transducers.
- Author
-
Shan, Yao, Zhang, Chao, Li, Pengyu, Liu, Shiyuan, Yang, Xiaodan, Zhang, Zhuomin, Hong, Ying, Zhang, Guangzu, and Yang, Zhengbao
- Subjects
- *
TRANSDUCERS , *SINTERING , *GAUSSIAN curvature , *DEFORMATION of surfaces , *PIEZOELECTRIC transducers , *STEREOLITHOGRAPHY , *PIEZOELECTRIC ceramics , *LEAD zirconate titanate - Abstract
[Display omitted] Bulk piezoceramics are widely used and functional materials, but they are hard to be shaped to adapt to complex 3D surfaces. Most existing ceramic shaping techniques, like 3D printing, come at the cost of physical properties such as piezoelectricity and thermal stability. Here to fabricate 3D piezoceramic sheets, we report a mold-assisted sintering (MAS) method that can replicate 3D surfaces with nonzero Gaussian curvatures while maintaining the intrinsic properties. Assisted with supporting molds, the MAS exploits elastic-to-viscous transition of piezoceramic powder compacts during sintering, bypassing the boundaries of deformation and surface development in an elastic continuum. We successfully replicate shapes to sintered lead zirconate titanate (PZT) ceramics from designed molds with saddle, sine and spherical surfaces, respectively. The PZT ceramic replicas show high piezoelectricity and excellent conformability towards nonplanar surfaces (maximum deviation 90 μm). We further demonstrate the advantage of the conformal curved piezoceramics by using them for wirelessly transferring power over a pipeline. The MAS method is low-cost, simple, scalable and applicable to various 3D energy transducers. [ABSTRACT FROM AUTHOR]
- Published
- 2023
- Full Text
- View/download PDF
37. Piezoelectric energy harvesting from extremely low-frequency vibrations via gravity induced self-excited resonance.
- Author
-
Li, Zhongjie, Zhao, Li, Wang, Junlei, Yang, Zhengbao, Peng, Yan, Xie, Shaorong, and Ding, Jiheng
- Subjects
- *
ENERGY harvesting , *OPEN-circuit voltage , *GRAVITY , *SELF-induced vibration , *CRYSTAL resonators , *RESONANCE - Abstract
In this paper, we originally present a gravity induced self-excited vibration generator based on a cantilever piezoelectric resonator. The configuration is composed of a sliding rod, a sleeve, a transduction unit. To estimate output voltage and investigate dynamic responses of the generator, an equivalent model based on mechanical structure was established and numerically solved. The effects of the cantilever length, tip mass and linear coupling factor on the open circuit voltage were discussed. In addition, we also conducted series of experiments to validate the theoretical responses. In a 10s cycle (namely 0.1Hz excitation frequency) scenario, the transduction unit responds with structural resonant frequency of 8.621Hz. The results of the experiments show that the open circuit voltage of the generator increases with increment of the cantilever beam length and the tip mass, which agrees well with simulation estimations. We also conducted impedance matching experiments to examine power response in the load spectrum, of which the results indicate that the prototype peak power reaches maximum 1.897 mW. We also discussed the change of gravity potential energy of the prototype and compared it with electric energy. This work provides a novel approach for piezoelectric energy harvesting from extremely low frequency excitations. [Display omitted] [ABSTRACT FROM AUTHOR]
- Published
- 2023
- Full Text
- View/download PDF
38. Investigation of frequency-up conversion effect on the performance improvement of stack-based piezoelectric generators.
- Author
-
Peng, Yan, Xu, Zhibing, Wang, Min, Li, Zhongjie, Peng, Jinlin, Luo, Jun, Xie, Shaorong, Pu, Huayan, and Yang, Zhengbao
- Subjects
- *
ENERGY harvesting , *PIEZOELECTRICITY , *IMPEDANCE matching , *MAGNITUDE (Mathematics) , *ELECTRIC capacity , *TRIBOELECTRICITY , *ELECTROMECHANICAL effects - Abstract
This paper originally investigates the influence of frequency-up conversion effect on piezoelectric stack generators for high-performance energy harvesting. A compressive-mode piezoelectric generator is proposed comprised of a piezostack and a spring-mass system for electromechanical transduction and mechanical excitation, respectively. The frequency-up conversion effect is induced by amplitude truncations of the mass under external excitation. A control group, i.e. without truncation, is set for performance comparisons. Experimental results indicate that, with the frequency-up conversion, instantaneous power and average power are enhanced by over 1000 and 177 times, respectively. Each voltage response cycle consists of two stages: high-frequency high-amplitude oscillation and the rest of low-frequency low-amplitude harmonic vibration. The frequency of the former stage determines impedance matching. Due to the frequency converted up by 69 times, and intrinsic high capacitance of the stack, the matched resistance is significantly reduced from over 5 kΩ to 73.10 Ω, resulting much higher power response than that without conversion. Additionally, increase of spring stiffness causes the decrease of voltage responses and less effectiveness of frequency conversion effect. In this work we conclusively report that an instantaneous peak power output of 0.32 W can be generated from a millimeter-size piezoelectric generator, which can foster development of high-viability self-powered applications. [Display omitted] • Original study on frequency-up conversion effect on the piezostack-based generators. • Achieving over two orders of magnitude enhancement of instantaneous power. • Matched impedance is lowered from 5.1 kΩ to 73Ω. • Average power enhanced by over 200 times after frequency conversion. • Study on the restoration spring stiffness affecting frequency converting behaviors. [ABSTRACT FROM AUTHOR]
- Published
- 2021
- Full Text
- View/download PDF
39. Toward a 0.33 W piezoelectric and electromagnetic hybrid energy harvester: Design, experimental studies and self-powered applications.
- Author
-
Li, Zhongjie, Li, Terek, Yang, Zhengbao, and Naguib, Hani E.
- Subjects
- *
ELECTROMAGNETIC waves , *PIEZOELECTRIC transducers , *MAGNETIC flux density , *ENERGY harvesting , *MAGNETIC flux , *ELECTRONIC systems , *NANOPOSITIONING systems , *MAGNETS - Abstract
• A novel hybrid scheme of piezoelectric and electromagnetic energy harvesting. • The harvester can yield a peak power of 0.33 W with a compact size. • The piezoelectric transduction operates in compressive mode. • The magnet array in electromagnetic transduction unit is arranged alternatively. • Applications of building self-powered sensors and electronics with the harvester. In this paper, we present a 0.33 W piezoelectric and electromagnetic hybrid energy harvester to tackle the problem of efficiently harnessing energy from low-frequency vibrations. Two types of transduction cores-one piezoelectric element and two sets of magnets and coils, are embedded into a compact design. Several techniques are employed to enhance the performance of the harvester. A pair of truss mechanisms are added into the system to amplify the strain of the piezoelectric element. A stopper is used to induce impact to take advantage of the frequency up conversion effect as well as nonlinearity. We used an array made of multiple small cubic magnets and alternative magnet arrangement rather than one magnet block, for abrupt magnetic flux density changes. Experimental results based on a fabricated prototype validate the proposed techniques that work collectively and enable the harvester to yield a maximum peak power more than 0.33 W at resonance under an excitation of 0.70 g. We also examined the capability of the harvester for self-powered applications. The harvester displays excellent charging performance to millifarad or farad-scale capacitors. An LED array consisting of 99 diodes was lit up in real time. More importantly, experimental results indicate that not just can the harvester simultaneously power a temperature and humidity sensor, and a calculator, but also when the excitation stops, the remaining charges stored can power them for ~20.38 min and ~8.33 min, respectively. This study can be of great significance for high-performance energy harvesting and further development of self-powered sensing and battery-free electronic systems. [ABSTRACT FROM AUTHOR]
- Published
- 2019
- Full Text
- View/download PDF
40. Thermal energy harvesting performance in 0.94Bi0.5Na0.5TiO3-0.06BaZr0.2Ti0.8O3: AlN composite ceramics based on the Olsen cycle.
- Author
-
Shen, Meng, Hu, Zhaoyao, Qiu, Yaqin, Qiu, Shiyong, Li, Ming-yu, Zhang, Guangzu, Zhang, Shujun, Yang, Zhengbao, Kagawa, Fumitaka, and Jiang, Shenglin
- Subjects
- *
COMPOSITE materials , *ENERGY harvesting , *PYROELECTRICITY , *WASTE heat , *ELECTRIC fields - Abstract
The pyroelectric effect provides an efficient route to convert low-grade waste heat into electricity. (Bi 0.5 Na 0.5)TiO 3 -based ceramic is one of the most attractive lead-free pyroelectric candidates due to its high polarization. However, the low breakdown strength (BDS) restricts its ability to achieve a high polarization, hindering the application for thermal energy harvesting based on the Olsen cycle. In this work, by incorporation of AlN into BNT-BZT ceramics to form the BNT-BZT: AlN composites, the BDS is enhanced from 160 kV cm−1 to 260 kV cm−1, leading to a high energy density of 1.54 J cm−3 which is ∼5 times that of the pristine BNT-BZT. The reason for the high energy harvesting performance is due to the addition of AlN that can depress the conductivity of the matrix, resulting in the high BDS that permits high electric fields to be applied on the samples to induce high polarization that changes pronouncedly with temperature. [ABSTRACT FROM AUTHOR]
- Published
- 2019
- Full Text
- View/download PDF
41. Improving the gravity-rotation-excited vibration energy harvesting in offset configurations.
- Author
-
Wang, Yilong, Zhao, Yang, Tian, Yishen, Cao, Dengqing, and Yang, Zhengbao
- Subjects
- *
ENERGY harvesting , *CENTRIFUGAL force , *TRIBOELECTRICITY , *LINEAR systems , *MOLECULAR force constants , *ROTATIONAL motion , *SYSTEM dynamics - Abstract
• The RMS voltage response of the energy harvester is increased by up to 1225%;. • We present a new quasi-zero stiffness mechanism for energy harvesters;. • We derive a stable solution to the adverse effect of the offset distance;. • The nonlinear dynamics of the proposed systems are analyzed comprehensively. The self-powered sensing technology based on gravity-rotation-excited vibration energy harvesting (GRE-VEH) enables information acquisition directly from rotatory machines online. However, the centrifugal effect due to the distance between the mass centroid of the energy harvester and the rotating axis (i.e., offset distance) seriously limits its broad engineering applications. To address this issue, we propose methods of using a tensile force provided by pre-deformed springs to counter the constant centrifugal force around the target rotation speed for improving the performance of the energy harvester affected by offset configurations. The GRE-VEH system with a linear spring is first studied by experiments and simulations, where a distributed-parameter model is developed and experimentally validated. The results well validate the proposed mechanism, where the performance of the harvester prototype significantly increases (by up to 1225%). A parametric study is also performed theoretically. The results indicate that the best performance improvement can be obtained by tuning the parameters related to the tensile length, the stiffness, and the damping of the spring. To enable the proposed mechanism in large centrifugal force cases, a pair of negative springs is introduced to the system for constructing a quasi-zero stiffness (QZS) structure together with the linear spring. The new GRE-VEH system is theoretically studied by an updated model, where the system's main characteristics are revealed. The simulation results well indicate the feasibility of the method using the QZS mechanism. This work paves a new way of solving the offset distance problem for the application of the GRE-VEH and also provides new insight into the application of the QZS mechanism. [Display omitted] [ABSTRACT FROM AUTHOR]
- Published
- 2023
- Full Text
- View/download PDF
42. Misalignment-induced bending-torsional coupling vibrations of doubly-clamped nonlinear piezoelectric energy harvesters.
- Author
-
Wang, Yilong, Zhao, Yang, Chen, Chao, Cao, Dengqing, and Yang, Zhengbao
- Subjects
- *
EULER-Bernoulli beam theory , *TORSIONAL vibration , *HAMILTON'S principle function , *FINITE element method - Abstract
• Distributed-parameter model for a doubly-clamped energy harvester affected by the misalignment-induced torsions in vibration environments. • Experimental validation for the developed model and the effects of the bending-torsional coupling vibration on the harvester. • Characterizations of the bending-torsional coupling vibration for the doubly-clamped beam structures. • Investigations on the effects of the key parameters on the torsion-induced jump-down phenomenon. This article presents a theoretical and experimental study on the unique bending-torsional coupling vibration of a doubly-clamped nonlinear piezoelectric energy harvester due to the misalignment of the centroid and the torsional axis in vibration environments. Based on the Euler-Bernoulli beam theory, the extended Hamilton's principle, and the Galerkin discretization, a distributed-parameter model considering the misalignment is developed, and the corresponding governing equations are formulated. The developed model is validated against experimental data and Finite Element Analysis, where good agreements are achieved. Effects of the key parameters on the system's responses, and the characteristics and the causes of the bending-torsional coupling vibration are studied numerically based on the developed model. The results show that the torsion-induced chaotic motion can activate the jump-down phenomenon, largely reducing the electrical output of the harvester. Additionally, the occurrence of the torsion-induced jump-down phenomenon is sensitive to the system's initial state in some cases and can be reduced or even avoided by effectively tuning parameters that have slight effects on the bending resonance, such as the preloaded axial force and the distance between the torsional axis and the centroid. [ABSTRACT FROM AUTHOR]
- Published
- 2022
- Full Text
- View/download PDF
43. Influence of effective electrode coverage on the energy harvesting performance of piezoelectric cantilevers.
- Author
-
Hu, Kun, Zhou, Bin, Wang, Fei, Yang, Zhengbao, and Wang, Min
- Subjects
- *
ENERGY harvesting , *STRAINS & stresses (Mechanics) , *HAMILTON'S principle function , *CANTILEVERS , *ELECTRODES , *BROMOMETHANE - Abstract
• A comprehensive electrode coverage design principle is developed. • Equivalent stiffness and damping are introduced to evaluate coupling coefficients. • Strongly coupled harvesters are compatible with a wide range of electrode coverage. Cantilevers are widely used for piezoelectric vibration energy harvesters (PEHs), thanks to the low resonance frequency and large mechanical strain under weak excitations. Electrode coverage optimization is essential for maximizing output power. In this study, bimorph cantilevers with segmented electrodes are developed to investigate the correlation between effective electrode coverage (EEC) and the harvesting behavior of piezoelectric cantilevers. A nonlinear electromechanical model is established using Hamilton's principle, numerically solved with the method of harmonic balance, and further validated by experimental measurements. Equivalent linear stiffness and equivalent mechanical damping ratio are firstly introduced for evaluating the equivalent effective electromechanical coupling coefficients and identifying strong and weak coupling harvesters. Both harvesters fabricated with and without proof mass behave mainly as strongly coupled systems and can obtain the maximum possible power at a very low EEC. Variation of EEC in higher range acquires almost constant maximum power on dramatically changing resistance. A comprehensive EEC design principle for acquiring the maximum output power is obtained for cantilevered PEHs. An optimal EEC obtaining the maximum effective electromechanical coupling coefficient is needed for acquiring the unique maximum power pick for weakly coupled harvesters, whereas a wide range of EEC can be used to maximize output power for harvesters those mainly behave as strongly coupled systems. [ABSTRACT FROM AUTHOR]
- Published
- 2021
- Full Text
- View/download PDF
44. An auxetic nonlinear piezoelectric energy harvester for enhancing efficiency and bandwidth.
- Author
-
Chen, Keyu, Gao, Qiang, Fang, Shitong, Zou, Donglin, Yang, Zhengbao, and Liao, Wei-Hsin
- Subjects
- *
ENERGY harvesting , *FINITE element method , *BANDWIDTHS , *WIRELESS sensor nodes , *LINEAR systems , *PARAMETRIC modeling , *ENERGY consumption , *MAGNETS - Abstract
[Display omitted] • Propose an auxetic nonlinear piezoelectric energy harvester. • Utilize a pure mechanical structure to enhance both efficiency and bandwidth. • Perform finite element analysis to analyse the performance of the harvester. • Experimentally validate the proposed design and model and conduct parametric studies. In this paper, we design and experimentally validate an auxetic nonlinear piezoelectric energy harvester. This harvester adopts a clamp-clamp beam with auxetic structures, which can improve the efficiency and bandwidth of the energy harvesting based on a pure mechanical structure without outer magnets or stoppers. Finite element analysis is performed to analyse the effects of the auxetic structures on the efficiency and nonlinearity of the energy harvester. The lumped parameter model is utilized to predict the performance of the energy harvester, which well matches the experimental results. In the experimental validation, at 0.1 g base acceleration, the power output of the two types of auxetic energy harvesters is 173% and 94% higher than the conventional nonlinear energy harvester. Besides, the bandwidths of the two types of auxetic energy harvesters are broadened by 1556% and 2142% compared with the linear systems. [ABSTRACT FROM AUTHOR]
- Published
- 2021
- Full Text
- View/download PDF
45. Thickness-variable composite beams for vibration energy harvesting.
- Author
-
Wang, Biao, Luo, Xiaowei, Liu, Yizhong, and Yang, Zhengbao
- Subjects
- *
ENERGY harvesting , *EULER-Bernoulli beam theory , *RAYLEIGH-Ritz method , *ENERGY consumption , *COMPOSITE construction - Abstract
Researchers have recently focused on improving the efficiency of piezoelectric energy harvesters by redesigning their substrate beams. Two approaches have been explored, including changing the shape of the cross-section area, i.e., width variation, and changing the thickness of cantilever beams. The width changing approach suffers from the deduction of output power from the piezoelectric elements of the trimmed-off regions, while performance deterioration does not occur in the thickness-variable approach. The benefit of thickness-variable beams on energy harvesting has been analyzed theoretically, but its detailed experimental study is still absent. In this study, we for the first time fabricate a thickness-variable harvester based on the Garolite FR-4 epoxy laminate, and validate the superiority of the variable thickness beam on the harvester performance enhancement. A theoretical model is developed based on the Euler-Bernoulli beam theory and numerically solved via the Rayleigh-Ritz method. We compare the thickness-variable composite beam configuration with a conventional uniform-thickness counterpart and unveil the beneficial effect of evenly-distributed strain on performance enhancement. Experiments indicate that the thickness-variable method increases on the energy harvester efficiency by 78%. [ABSTRACT FROM AUTHOR]
- Published
- 2020
- Full Text
- View/download PDF
46. Direction-adaptive energy harvesting with a guide wing under flow-induced oscillations.
- Author
-
Gong, Ying, Shan, Xiaobiao, Luo, Xiaowei, Pan, Jia, Xie, Tao, and Yang, Zhengbao
- Subjects
- *
ENERGY harvesting , *HYDRAULICS , *OSCILLATIONS , *FLOW velocity , *ELECTRIC power distribution grids , *ELECTRONIC equipment , *WING-warping (Aerodynamics) - Abstract
Ocean, as a natural system containing a tremendous amount of energy, can be used for either the large-scale power grid network or small-scale distributed off-grid electronic devices via the energy harvesting technology. As one low-cost and effective way to capture flow energy, the vortex induced vibration (VIV) energy harvesting is attracting more and more attention. However, the direction of water flow in a natural water environment is changeable while most existing VIV harvesters are limited by their directional sensitivity. These harvesters only respond to flow excitations from one fixed direction and become insufficient once the flow direction varies. In this paper, we take the lead to address the unidirectional sensitivity issue and propose a novel direction-adaptive energy harvester. We establish theoretical models to analyze the Kármán vortex street, the torque excitation, and the vortex-induced pressure oscillations. Prototypes are fabricated and tested to characterize the direction-adaptive capability of the proposed design under different flow conditions. The experiments demonstrate that the energy harvesting angle span is extended by the guide wing from 40° to 360° under a wide flow velocity range. The guide-wing method endows harvesters with an all-around multidirectional sensitivity, and thus will accelerate energy harvesters' applications in oceans. • Introduce the directional self-adaptability to VIV energy harvesters. • Develop the first all-around 360° direction-adaptive flow energy harvester. • Design and analyze a unique guide wing theoretically and experimentally. • Can be adopted by other harvesters to improve their environmental adaptability. [ABSTRACT FROM AUTHOR]
- Published
- 2019
- Full Text
- View/download PDF
Catalog
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.