Search

In this paper, the damping ability of point of common coupling (PCC) voltage feedforward is analyzed in order to improve the stability of current control, in which interference with an LCL filter of a battery energy storage system (BESS) and synchronous inductance of a diesel generator is considered in a stand-alone microgrid. A BESS can be charged by a diesel generator when the state of charge of the battery bank is significantly insufficient and where the BESS operates with constant current constant voltage control and the diesel generator provides constant voltage constant frequency control. In this case, large synchronous when the diesel generator is in a steady state may severely cause the instability of current control. The stability analysis should be required to guarantee the paralleled operation between BESS and diesel generator. An equivalent circuit model of the diesel generator is needed to perform these processes. To bring availability of analysis, this paper considers a simple equivalent circuit model considering synchronous inductance in the steady state, and it has very large inductance corresponding 1 per unit. The resonance issue is attenuated by the damping ability of PCC voltage feedforward where it is possible to improve the stability by appropriately adjusting the gain of the voltage feedforward. The effects of the synchronous inductance and the feedforward loop are analyzed in the s-domain and z-domain. The gain of the voltage feedforward is determined to be 0.2 and 0.4 based on stability analysis. To verify the validity of the damping effect of PCC voltage feedforward, a demonstration site is constructed and the stability is verified through simulation and experiment with a full model, and total harmonic distortion of current is improved to 2.44%. [ABSTRACT FROM AUTHOR]

This paper discusses charging modes of series-resonant converter (SRC) for an energy storage capacitor in terms of charging time, losses of switch, normalized peak resonant current, normalized peak resonant voltage, and switch utilization in three operational modes. Principles of operation on the full-bridge SRC with capacitor load are explained, and charging characteristics in discontinuous and continuous operational modes are analyzed. Based on the analysis and the simulation focused on the aforementioned five performance indexes, ms = 0.5 is evaluated to be the optimized operating frequency ratio for charging an energy storage capacitor. A 1.8-kJ/s SRC prototype is assembled with the TI 28335 DSP controller and a 40-kJ 7-kV capacitor. Design rules based on the comparative analysis are verified by experiment. [ABSTRACT FROM PUBLISHER]