Search

The precise design and fabrication of electrode materials is important for the development of high-performance flexible supercapacitors. Cu 2 O/MXene film electrodes with an interconnected conductive network structure are prepared in this work by in situ growth of Cu 2 O nanoparticles in a Ti 3 C 2 Tx dispersion, followed by alkali induction and vacuum filtration. The interconnected crimpled Ti 3 C 2 Tx structure produced by alkali induction not only works as the self-supported conductive network of the thin film electrode but also demonstrates sufficient open pores and high surface area, which can promote electrolyte penetration and increase active sites for energy storage. The synergy between Cu 2 O nanoparticles and the crimpled Ti 3 C 2 Tx framework leads to good structural stability and electrochemical performance. The results show that the Cu 2 O/MXene electrode exhibits a high specific area capacitance of 1518 mF cm−2 in 1 M LiCl electrolyte. In addition, the all-solid-state flexible supercapacitor fabricated with the Cu 2 O/MXene electrode exhibits excellent cyclic stability and flexibility; the capacity retains 94.3% after 10,000 charge and discharge cycles, and the energy storage performance remains stable after 50 mechanical bending cycles. • In situ growing Cu 2 O in Ti 3 C 2 Tx dispersion helps achieve higher energy density. • The interconnected network structure benefits charge transfer. • The interaction between Cu 2 O and MXene improve the energy storage performance. [ABSTRACT FROM AUTHOR]

• 1T-MoS 2 was applied as a flexible and functional "spacer" to hybridize with Ti 3 C 2 T X MXene, forming flexible capacitive freestanding films. • The insertion of electrically neutral pseudocapacitive could mitigate the restacking of Ti 3 C 2 T X MXene layers and improves the capacity of the composite paper. • The supercapacitor fabricated with acidic gel electrolyte and composite electrode with randomly stacked MXene and 1T-MoS 2 in a mass ratio of 6:1 demonstrated optimal performance. In the case of increasing shortage of non-renewable resources, developing high-efficiency and high-capacity energy storage devices is critical. Supercapacitors have the potential of high-efficiency and high-capacity. MXene and 1T-MoS 2 are two kinds of high performance pseudocapacitive materials. However, the stacking and aggregation of MXene nanosheets greatly reduce its capacity. The poor conductivity of 1T-MoS 2 also limits the full expression of its excellent pseudocapacitive performance. A flexible MXene/1T-MoS 2 composite paper electrode is designed and prepared in this work where the restacking of MXene can be relieved and the whole electrode maintains the conductivity. The interior stacking structure of MXene and 1T-MoS 2 in the composite paper, as well as the gel electrolyte type are explored. The device constructed with the electrode composed of randomly stacked MXene and 1T-MoS 2 (mass ratio 6:1) and acidic electrolyte (PVA/H 2 SO 4 gel electrolyte) demonstrates the optimal performance. The specific areal and volumetric capacitances reach 561.2 mF cm−2 and 1268.17 F cm−3 at the current density of 0.8 mA cm−2 respectively, outperforming most of the previously reported values for MXene based supercapacitors tested in gel electrolyte. The supercapacitor has excellent deformation durability and long cycle stability, demonstrating promising prospect in future flexible electronics. [Display omitted] [ABSTRACT FROM AUTHOR]