Search

Based on Solidworks software, the three-dimensional model of two wheels scooter is set up. The finite element model of two wheels scooter is generated. Modal analysis of driving system and telescopic mechanism of bar on two wheels scooter is investigated. The first five orders natural frequency and major modes of driving system and telescopic mechanism of bar are clarified. The method and the result can be used as a reference of dynamic design and lay foundation for calculation and analysis of dynamic response for the two wheels scooter.

Kinematic characteristics of double-rocker mechanism is analyzed. Based on variable ratio transmission characteristics of elliptical gear, elliptical geared double-rocker mechanism is presented. Kinematic characteristics of elliptical geared double-rocker mechanism is clarified. Eccentricity is optimized. The elliptical geared double-rocker mechanism with approximate uniform rectilinear motion is designed. The methods in this paper facilitate the innovation design of the mechanism with approximate uniform rectilinear motion.

The construction with hanging basket eccentric loading was studied for the cantilever casting of a 32m +48 m +32 m continuous box girder. The calculation of center deflecting angles of cantilever box girders with variable cross-section due to pure torsion was derived, and correspondingly a program was developed to calculate this formula. An analysis model of cantilever casting continuous beam bridge with hanging basket eccentric loading was established based on finite elements software, and the shear stress, the longitudinal normal stress and the combined stress of different section were analyzed under different construction process. The torsional effect due to hanging basket eccentric loading was studied and the results are helpful to guide the construction in practice.

Refining performance and mechanism of Al-5Ti-1B and Al-5Ti-0.4C master alloys at different temperature were investigated in this paper. The experimental results show that the refining effect of Al-5Ti-0.4C master alloy becomes worse as temperature increasing from 750°C to 1200°C, The refining effect of Al-5Ti-1B master alloy becomes worse as temperature increasing from 750°C to 1000°C. However, when the temperature is above 1000°C, the refining effect of Al-5Ti-1B master alloy recovers gradually as temperature increasing. TiB2 particles with TiAl3 layers are the heterogeneous nucleating cores of α-Al at low temperature. However, TiB2 particles are the heterogeneous nuclei of α-Al at high temperature.

This paper analyzes the problems existing in design and manufacture of the reciprocating screw in the spooling gear and proposes the solutions accordingly. By adopting software such as Solidworks and Unigraphics for three-dimensional design, a solid model meeting the design requirement can be obtained, providing good reference value for design and manufacture of the screw.

From the bus active safety standpoint, this article designs the embedded system to control the speed of automobile in time without changing the original structure. The system selects STR712FR2 based on ARM7 as the microprocessor, able to control the automobile speed in accordance with the road conditions. The system has advantages in simple structure, low power consumption and practical function. The system function, the overall design and implementation procedure of the system, the software and hardware choice are analyzed in detail. Meanwhile, the initial validation of the system is carried out.