Search

As an effective method to prolong the life of mature field, conformance control in water-injection well has been used wildly. Naturally, effect evaluation of conformance control has attracted great attention because it is an important guideline for the design of later enhanced oil recovery (EOR) plan. Usually, production responses such as excessive water reduction and oil production increment are widely used as the indicators. However, production responses may be unreliable due to the difficulty in determining an effective injection well which is caused by a large number of treated water-injection wells in a well group. Therefore, with the application of fuzzy comprehension evaluation (FCE), five evaluation indexes (injection pressure, injectivity index, slope of hall curve, variation coefficient and homogenization coefficient of injection profile) describe injection responses were selected to establish a new evaluation method in this paper. Based on fuzzy mathematics, FCE reflects the difference of evaluation units. Meanwhile, weights of evaluation indexes were obtained by analytic hierarchy process (AHP), which made the results more convincing. Taking Bai 239 oilfield as an example, the five injection responses indexes were used to assess treatment effect on five water-injection wells by single index evaluation and FCE. The results showed that among the five evaluation indexes mentioned above, the slope of hall curve was the most important factor affected evaluation result. In single index evaluation, opposite results may be produced easily on account of the one-sidedness of single index or human error. Furthermore, we found that effective treatment was a relative concept actually. The result of FCE was consistent with single index evaluation but FCE was more acceptable. This study suggests that FCE could be applied to another field such as water flooding, acidizing and hydraulic fracturing

Polymer gel was widely used as water shutoff agent in mature oil fields. And the results of single-phase plugging experiments show that the plugging rate of the polymer gel to the oil phase is lower than that of the water phase. However, the disproportionate permeability reduction (DPR) mechanism of polymer gels still remains controversial. In this paper, we used four gel formulations including polyethyleneimine (PEI) and phenol-formaldehyde crosslinked gel with and without adding laponite to investigate the effect of gel elastic property on the water shutoff mechanism. The result of sand pack flooding experiments shown that the gel with higher elastic modulus has better effects on decreasing water cut and increasing oil recovery. After adding laponite, the elastic modulus of phenol-formaldehyde crosslinked gel increased from 64.2 Pa to 192 Pa, and the elastic modulus of PEI crosslinked gel increased from 27.4 Pa to 36.5 Pa. Compared to the phenol-formaldehyde-HAPM gel, the oil recovery of laponite-phenol-formaldehydeHPAM gel increased by 5.2% and the maximum water cut decreased by 8.3%. Besides, comparing with PEI-HPAM gel, the oil recovery of laponite-PEI-HPAM gel increased by 2.7% and the water cut dropped by 27.8%. In the meanwhile, the laponite-phenol-formaldehyde-HPAM gel with higher elastic modulus obviously swells in the formation water but almost remains constant in oil at 105(C. The mass of gel soaked in the formation water increased from 42 g to 96 g and the gel volume increased by 300% within 48 hours. This study improves the understanding of the DPR mechanism of polymer gel for water shutoff. [ABSTRACT FROM AUTHOR]