Search

The occurrence and fluxes of 18 priority substances and emerging pollutants listed in the European Union Water Framework Directive and a Watch List (trace metals (Cd, Pb and Ni), nonylphenols, octylphenols, 8 polyaromatic hydrocarbons, 4 dioxin-like polychlorinated biphenyls and diclofenac) were investigated in a Ukrainian city and the mass discharge loads of these compounds into EU-transboundary watersheds were estimated. Fluxes of chemicals were calculated per capita and per area of the Ukrainian urban territory and used to estimate mass loading of priority and emerging concern compounds from Lviv, Uzhorod and Chernivtsi (West Ukraine) to neighbouring EU-transboundary rivers. The highest loading was found for trace metals (1.15 t a -1 ), diclofenac (0.7 t a -1 ) and nonylphenols (0.4 t a -1 ). Transboundary water contamination must be considered in order to successfully manage water resources in a manner that fulfils the requirements of EU environmental quality standards., (Copyright © 2018 Elsevier B.V. All rights reserved.)

To better understand the fate of metals in the environment, numerous parameters must be studied, such as the soil properties and the different sources of contamination for the organisms. Among bioindicators of soil quality, the garden snail (Cantareus aspersus) integrates multiple sources (e.g. soil, plant) and routes (e.g. digestive, cutaneous) of contamination. However, the contribution of each source on metal bioavailability and how soil properties influence these contributions have never been studied when considering the dynamic process of bioavailability. Using accumulation kinetics, this study showed that the main assimilation source of Cd was lettuce (68%), whereas the main source of Pb was the soil (90%). The plant contribution increased in response to a 2-unit soil pH decrease. Unexpectedly, an increase in the soil contribution to metal assimilation accompanied an increase in the organic matter (OM) content of the soil. For both metals, no significant excretion and influence of source on excretion have been modelled either during exposure or depuration. This study highlights how the contribution of different sources to metal bioavailability changes based on changes in soil parameters, such as pH and OM, and the complexity of the processes that modulate metal bioavailability.

This study investigates the variations of polycyclic aromatic hydrocarbon (PAH) levels in surface water, suspended particulate matter (SPM) and sediment upstream and downstream of the discharges of two wastewater treatment plant (WWTP) effluents. Relationships between the levels of PAHs in these different matrices were also investigated. The sum of 16 US EPA PAHs ranged from 73.5 to 728.0 ng L(-1) in surface water and from 85.4 to 313.1 ng L(-1) in effluent. In SPM and sediment, ∑16PAHs ranged from 749.6 to 2,463 μg kg(-1) and from 690.7 μg kg(-1) to 3,625.6 μg kg(-1), respectively. Investigations performed upstream and downstream of both studied WWTPs showed that WWTP discharges may contribute to the overall PAH contaminations in the Loue and the Doubs rivers. Comparison between gammarid populations upstream and downstream of WWTP discharge showed that biota was impacted by the WWTP effluents. When based only on surface water samples, the assessment of freshwater quality did not provide evidence for a marked PAH contamination in either of the rivers studied. However, using SPM and sediment samples, we found PAH contents exceeding sediment quality guidelines. We conclude that sediment and SPM are relevant matrices to assess overall PAH contamination in aquatic ecosystems. Furthermore, we found a positive linear correlation between PAH contents of SPM and sediment, showing that SPM represents an integrating matrix which is able to provide meaningful data about the overall contamination over a given time span.

There is an increasing need for developing noninvasive markers of accumulation when studying the transfer of pollutants in wildlife, in response to problems caused by sacrifice of animals (disturbed population dynamics, respect of ethical protocols). Thus, the aim of this work was to determine whether trace metal (TM) concentrations in hair could be used as an accurate noninvasive estimator of internal and environmental concentrations. For that purpose, on a 40km² site surrounding an ancient smelter, 321 wood mice (Apodemus sylvaticus) were sampled on seven squares (500×500m) and 4 squares in fall 2010 and spring 2011, respectively. The relationships between the cadmium (Cd) and lead (Pb) concentrations in hair and those in the liver, kidneys, and soils were described. The results indicated that hair concentration was a relatively good predictor of Pb concentrations in organs (p<0.001, 0.46

The breeding parameters and the egg and nestling morphology of Cyanistes caeruleus populations from rural, intermediate, and urban sites in Algeria and the relationships of those variables with lead contamination were studied during three consecutive years. Breeding success was explained only by predation and vandalism rates. Predation was higher in the rural area, whereas vandalism was higher in the urban site. The other measured breeding parameters and egg characteristics were relatively insensitive to study site. The morphology of urban nestlings exhibited a trend toward smaller body size and mass compared to individuals from intermediate and rural sites. Although lead concentrations were higher in the tissues of urban birds than in intermediate and rural individuals, we did not detect a clear influence of this variable on nestling morphology. We conclude that urbanization influenced blue tit breeding parameters through predation and vandalism and nestling morphology through mechanisms other than lead pollution., (Copyright © 2012 Elsevier Ltd. All rights reserved.)

Blood composition is commonly measured to assess exposure to and effects of metals on birds. In most of passerine species, only small volumes of blood may be sampled safely (<500 μL), which limit the measure of several markers of health status and chemical residues. Here, we documented the partitioning of Cd and Pb in the blood of European Blackbirds Turdus merula in order to propose usable relationships between whole blood concentrations (for which toxicological benchmarks exist) and those measured in the erythrocytes. Sixty-two blackbirds were trapped along a pollution gradient (smelter of Metaleurop Nord, Northern France). Blood was sampled and Cd and Pb concentrations were measured both in whole blood and in the erythrocytes only. Birds coming from the most contaminated sites exhibited high residues for both Cd and Pb. We assessed that 73% and 99% of Cd and Pb, respectively, were associated to erythrocytes. Strong linear relationships, that were not influenced by neither the age nor the sex, were established between whole blood residues and those of erythrocytes for Cd and Pb (adj-R(2)=0.78 and 0.93, respectively). Present findings are promising to optimize the use of small blood samples in order to investigate several responses relative to wildlife health status., (Copyright © 2012 Elsevier Ltd. All rights reserved.)

Industrial wastewater containing heavy metals is generally decontaminated by physicochemical treatment consisting in insolublizing the contaminants and separating the two phases, water and sludge, by a physical process (filtration, settling or flotation). However, chemical precipitation does not usually remove the whole pollution load and the effluent discharged into the environment can be toxic even if it comes up to regulatory standards. To assess the impact of industrial effluent from 4 different surface treatment companies, we performed standardized bioassays using seeds of the lettuce Lactuca sativa. We measured the rate of germination, and the length and mass of the lettuce plantlet. The results were used to compare the overall toxicity of the different effluents: effluents containing copper and nickel had a much higher impact than those containing zinc or aluminum. In addition, germination tests conducted using synthetic solutions confirmed that mixtures of metals have higher toxicity than the sum of their separate constituents. These biological tests are cheap, easy to implement, reproducible and highlight the effects caused by effluent treated with the methods commonly applied in industry today. They could be routinely used to check the impact of industrial discharges, even when they meet regulatory requirements for the individual metals., (Copyright © 2011 Elsevier Inc. All rights reserved.)

As part of a larger program aiming at assessing transfer and effects of metals in food webs, this work studied the spatial distribution of Cd, Cr, Cu, Pb, and Zn in 101 sub-surface soils, systematically sampled (1 x 1 km regular grid) over a large area around Annaba, the fourth most-populated city of Algeria. Cd and Cr exhibited only one abnormally high value, with all other concentrations being close to pedogeological background. Some places in the centre of the city were polluted by Pb (up to 823 mg kg(-1)), probably due to aerial deposition from gasoline exhausts. Zn never exceeded regulatory limits over the whole sampling area. Cu was the only element for which a spatial autocorrelation occurred. A spatial interpolation by cokriging allowed the identification of agricultural activities as the main Cu pollution source. Our approach revealed various anthropogenic pollution sources, more efficiently for large-scale patterns than for local abnormalities., (Copyright 2010 Elsevier Ltd. All rights reserved.)

Among soil invertebrates, terrestrial snails are herbivorous and detritivorous organisms exposed to polluted soils by both digestive and cutaneous routes. Using laboratory-reared snails (Helix aspersa aspersa), we describe how the effects of contaminants on survival and growth of snails can be evaluated in laboratory bioassays. A national ring test was performed to assess the effect of Cd added to the soil or to the food. The ecotoxicity of sewage sludge also was evaluated. The present results demonstrate that toxicity depends on both the pollutants and the exposure route. Cadmium was sixfold more toxic for snails exposed via food contamination (median effective concentration [EC50], 68-139 microg/g) than via soil contamination (EC50, 534-877 microg/g), whereas the opposite occurred with the sewage sludge (EC50, 55% of sludge in the food and 10% of waste in the soil). A logistic relationship linked growth inhibition and internal Cd concentrations, which can reach 2,000 microg/g in the viscera of snails exposed to 626 microg/g in the food. No clear trend was found between Cu, Zn, Pb, Cr, and Ni concentrations in the sludge and in snail tissues. These data enabled the development of an international standard, which should enhance the use of terrestrial gastropods for both fundamental research and routine risk assessment in the terrestrial environment.

The transfer of Cd, Cu, Ni, Pb, and Zn was evaluated in a soil-plant (lettuce, Lactuca sativa)-invertebrate (snail, Helix aspersa) food chain during a microcosm experiment. Two agricultural soils, polluted and unpolluted, were studied. Lettuce was cultivated for eight weeks before introduction of snails into the microcosms (M-snails). In a parallel experiment, snails were exposed to lettuce only (i.e., without soil) in simpler exposure devices called containers (C-snails). Snail exposure duration was eight weeks for both M- and C-snails. No effects on snail survival were found. Both M- and C-snails exposed to polluted soil showed a growth reduction, but only after two weeks of exposure. Time-dependent accumulation in M-snails exposed to the polluted environment showed a regular increase of Cd and Zn concentrations over time and a rapid increase of Pb concentrations within the first two weeks, which then remained stable. Copper and Ni concentrations did not increase during any of the experiments. Concentrations in M- and C-snails were compared to estimate the relative contribution of soil and plant to the total bioaccumulation. The results suggest that the soil contribution may be higher than 80% for Pb, from 30 to 60% for Zn, and from 2 to 40% for Cd.