Search

The existence of heavy metals in ecological systems poses great threats to living organisms due to their toxicant and bio-accumulating properties. Mercury is a known toxicant with notable malignant impacts. It has long been known to cause toxic threats to the health of living organisms since the break out of Minamata disease. The turbulent expulsion of mercury-based pollutants from the industrial sector, requires a proper solution. Many attempts have been made to design a greener and more efficient route for a satisfactory removal of mercury. In the current study, bismuth sulfide nanoparticles (BiSNPs) have been synthesized via the co-precipitation method. The BiSNPs were supported with crosslinked chitosan to enhance their sorption capacity and avoid leaching. The average size of the BiSNPs was 42 nm based on SEM micrographs. The SEM analysis of the bismuth sulfide chitosan-crosslinked beads (BiS-CB) showed that the beads possessed a spherical and smooth morphology with a size of 1.02 mm. The FTIR analysis showed that the beads possessed the characteristics bands of imine groups of chitosan, bismuth, sulfur, and glycosidic linkages present in the molecules. The XRD analysis confirmed the phase crystallinity of the BiS-CB with an average crystallite size of 11 nm. The BiS-CB was employed for the sorption of mercury from water samples. The maximum sorption capacity of 65.51 mg/g was achieved at optimized conditions of pH 5, concentration 80 ppm, in 45 min at 30 °C. The mechanism studied for mercury removal showed that sorption followed the complexation mechanism according to the SHAB concept. In conclusion, the results showed that the BiS-CB sorbent exhibited an excellent sorption capacity to remove mercury., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier Inc. All rights reserved.)

Many environmental pollutants caused by uncontrolled urbanization and rapid industrial growth have provoked serious concerns worldwide. These pollutants, including toxic metals, dyes, pharmaceuticals, pesticides, volatile organic compounds, and petroleum hydrocarbons, unenviably compromise the water quality and manifest a severe menace to aquatic entities and human beings. Therefore, it is of utmost importance to acquaint bio-nanocomposites with the capability to remove and decontaminate this extensive range of emerging pollutants. Recently, considerable emphasis has been devoted to developing low-cost novel materials obtained from natural resources accompanied by minimal toxicity to the environment. One such component is cellulose, naturally the most abundant organic polymer found in nature. Given bio-renewable sources, natural abundance, and impressive nanofibril arrangement, cellulose-reinforced composites are widely engineered and utilized for multiple applications, such as wastewater decontamination, energy storage devices, drug delivery systems, paper and pulp industries, construction industries, and adhesives, etc. Environmental remediation prospective is among the fascinating application of these cellulose-reinforced composites. This review discusses the structural attributes of cellulose, types of cellulose fibrils-based nano-biocomposites, preparatory techniques, and the potential of cellulose-based composites to remediate a diverse array of organic and inorganic pollutants in wastewater., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

From metal-organic chemistry, metal-organic frameworks (MOFs) are of supreme interest for catalysis and environmental settings. Owing to anthropogenic sources and booming industrial practices, the most challenging issue is increased water pollution and environmental insecurity. For instance, several types of synthetic dyes are toxic up to a certain extent, as emerging organic contaminants (EOCs) pose adverse environmental and potential health consequences. A gradual increase in the contamination sources and unpredictable environmental changes in terms of anthropogenic pollution severely affect both water availability and distribution. Therefore, the treatment of dyes containing wastewater matrices for water resource generation is one of the most important tasks, which must be addressed effectively. With structural tunability, MOFs have been appearing as a robust tool for remediating toxic pollutants from wastewater matrices. Moreover, the promising functionality, structural tunability, robust catalytic attributes, compatibility, large surface area, stability in water, and ease in surface functionalization make MOFs one of the considerable materials of interest. This review work spotlights the present-day progress related to MOFs and their catalytic and adsorptive chemistry for a sustainable environment. Following a brief introduction, the characteristic rendering MOFs, as adsorbents, are given with prominent examples. Next, several synthesis routes as a roadmap to engineer MOFs are discussed. From the applied perspective, the adsorptive and catalytic potentialities of MOFs as given by addressing sustainable mitigation of toxic dyes. The last section of the work illustrates key challenging issues and future directions by considering the suiting importance of MOFs., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

Employing dyes in different industrial sectors has produced a serious threat to the environment and living organisms of water bodies and land. For the decontamination of such toxic dyes, efforts have been made to develop an efficient, feasible, and low maintenance processes. In this context, chitosan-zinc selenide (CS–ZnSe) nanoparticles were prepared through chemical reduction method as the efficient photocatalysts for the decontamination of toxic dyes through photocatalysis. Photocatalyst's synthesis was confirmed with the help of FTIR spectroscopy. XRD indicated the hexagonal crystal structure of the CS–ZnSe with a crystallite size of 12 nm. SEM micrographs showed the average nano photocatalyst size as 25 nm. EDX analysis was employed to determine the elemental composition of the CS–ZnSe. An excellent photocatalytic degradation efficiency for tartrazine and sunset yellow dyes was obtained using CS–ZnSe. The results showed a 98% and 97% degradation efficiency for tartrazine dye and sunset yellow (SY) dye at optimized conditions of time (3 h), pH (5), dye concentration (30 ppm), catalyst dosage (0.09 g and 0.01 g) , and at a temperature of 35 °C. Findings of the photocatalytic degradation process fitted well with first-order kinetics for both the dyes. Rate constant, 'K' value was found to be 0.001362 min−1 and 0.001257 min−1 for tartrazine and SY dyes, respectively. While value for (correlation coefficient, R2) was 0.99307 and 0.99277 for tartrazine and sunset yellow dyes, respectively. Recyclability of the photocatalyst was confirmed using it for consecutive cycles to degrade organic dyes. Results showed that the CH–ZnS possesses excellent efficiency in decontaminating organic dyes from industrial wastewater. [ABSTRACT FROM AUTHOR]