Search

Clostridium acetobutylicum is a promising biocatalyst for the renewable production of n-butanol. Several metabolic strategies have already been developed to increase butanol yields, most often based on carbon pathway redirection. However, it has previously demonstrated that the activities of both ferredoxin-NADP+ reductase and ferredoxin-NAD+ reductase, whose encoding genes remain unknown, are necessary to produce the NADPH and the extra NADH needed for butanol synthesis under solventogenic conditions. Here, we purify, identify and partially characterize the proteins responsible for both activities and demonstrate the involvement of the identified enzymes in butanol synthesis through a reverse genetic approach. We further demonstrate the yield of butanol formation is limited by the level of expression of CA_C0764, the ferredoxin-NADP+ reductase encoding gene and the bcd operon, encoding a ferredoxin-NAD+ reductase. The integration of these enzymes into metabolic engineering strategies introduces opportunities for developing a homobutanologenic C. acetobutylicum strain. Ferredoxin-NAD(P) + oxidoreductases are important enzymes for redox balancing in n-butanol production by Clostridium acetobutylicum, but the encoding genes remain unknown. Here, the authors identify the long sought-after genes and increase n-butanol production by optimizing the levels of the two enzymes. [ABSTRACT FROM AUTHOR]

In hydrogenases and many other redox enzymes, the buried active site is connected to the solvent by a molecular channel whose structure may determine the enzyme's selectivity with respect to substrate and inhibitors. The role of these channels has been addressed using crystallography and molecular dynamics, but kinetic data are scarce. Using protein film voltammetry, we determined and then compared the rates of inhibition by CO and O2 in ten NiFe hydrogenase mutants and two FeFe hydrogenases. We found that the rate of inhibition by CO is a good proxy of the rate of diffusion of O2 toward the active site. Modifying amino acids whose side chains point inside the tunnel can slow this rate by orders of magnitude. We quantitatively define the relations between diffusion, the Michaelis constant for H2 and rates of inhibition, and we demonstrate that certain enzymes are slowly inactivated by O2 because access to the active site is slow. [ABSTRACT FROM AUTHOR]

In Clostridium acetobutylicum, [FeFe]-hydrogenase is involved in hydrogen production in vivo by transferring electrons from physiological electron donors, ferredoxin and flavodoxin, to protons. In this report, by modifications of the purification procedure, the specific activity of the enzyme has been improved and its complete catalytic profile in hydrogen evolution, hydrogen uptake, proton/deuterium exchange and para-H2/ ortho-H2 conversion has been determined. The major ferredoxin expressed in the solvent-producing C. acetobutylicum cells was purified and identified as encoded by ORF CAC0303. Clostridium acetobutylicum recombinant holoflavodoxin CAC0587 was also purified. The kinetic parameters of C. acetobutylicum [FeFe]-hydrogenase for both physiological partners, ferredoxin CAC0303 and flavodoxin CAC0587, are reported for hydrogen uptake and hydrogen evolution activities. [ABSTRACT FROM AUTHOR]

The objective of the present study was to characterize the metabolism of Clostridium thermolacticum, a thermophilic anaerobic bacterium, growing continuously on lactose (10 g l−1) and to determine the enzymes involved in the pathways leading to the formation of the fermentation products. Biomass and metabolites concentration were measured at steady-state for different dilution rates, from 0.013 to 0.19 h−1. Acetate, ethanol, hydrogen and carbon dioxide were produced at all dilution rates, whereas lactate was detected only for dilution rates below 0.06 h−1. The presence of several key enzymes involved in lactose metabolism, including beta-galactosidase, glyceraldehyde-3-phosphate dehydrogenase, pyruvate:ferredoxin oxidoreductase, acetate kinase, ethanol dehydrogenase and lactate dehydrogenase, was demonstrated. Finally, the intracellular level of NADH, NAD+, ATP and ADP was also measured for different dilution rates. The production of ethanol and lactate appeared to be linked with the re-oxidation of NADH produced during glycolysis, whereas hydrogen produced should come from reduced ferredoxin generated during pyruvate decarboxylation. To produce more hydrogen or more acetate from lactose, it thus appears that an efficient H2 removal system should be used, based on a physical (membrane) or a biological approach, respectively, by cultivating C. thermolacticum with efficient H2 scavenging and acetate producing microorganisms. [ABSTRACT FROM AUTHOR]

By analysing the results of experiments carried out with two FeFe hydrogenases and several “channel mutants” of a NiFe hydrogenase, we demonstrate that whether or not hydrogen evolution is significantly inhibited by H2 is not a consequence of active site chemistry, but rather relates to H2 transport within the enzyme. [ABSTRACT FROM AUTHOR]

Using direct electrochemistry to learn about the mechanism of electrocatalysts and redox enzymes requires that kinetic models be developed. Here we thoroughly discuss the interpretation of electrochemical signals obtained with adsorbed enzymes and molecular catalysts that can reversibly convert their substrate and product. We derive analytical relations between electrochemical observables (overpotentials for catalysis in each direction, positions, and magnitudes of the features of the catalytic wave) and the characteristics of the catalytic cycle (redox properties of the catalytic intermediates, kinetics of intramolecular and interfacial electron transfer, etc.). We discuss whether or not the position of the wave is determined by the redox potential of a redox relay when intramolecular electron transfer is slow. We demonstrate that there is no simple relation between the reduction potential of the active site and the catalytic bias of the enzyme, defined as the ratio of the oxidative and reductive limiting currents; this explains the recent experimental observation that the catalytic bias of NiFe hydrogenase depends on steps of the catalytic cycle that occur far from the active site [Abou Hamdan et al., J. Am. Chem. Soc.2012, 134, 8368]. On the experimental side, we examine which models can best describe original data obtained with various NiFe and FeFe hydrogenases, and we illustrate how the presence of an intramolecular electron transfer chain affects the voltammetry by comparing the data obtained with the FeFe hydrogenases from Chlamydomonas reinhardtii and Clostridium acetobutylicum, only one of which has a chain of redox relays. The considerations herein will help the interpretation of electrochemical data previously obtained with various other bidirectional oxidoreductases, and, possibly, synthetic inorganic catalysts. [ABSTRACT FROM AUTHOR]

Direct electron transfer between enzymes and electrodes is now commonly achieved, but obtaining protein films that are very stable may be challenging. This is particularly crucial in the case of hydrogenases, the enzymes that catalyze the biological conversion between dihydrogen and protons, because the instability of the hydrogenase films may prevent the use of these enzymes as electrocatalysts of H2 oxidation and production in biofuel cells and photoelectrochemical cells. Here we show that two different FeFe hydrogenases (from Chamydomonas reinhardtii and Clostridium acetobutylicum) can be covalently attached to functionalized pyrolytic graphite electrodes using peptidic coupling. In both cases, a surface patch of lysine residues makes it possible to favor an orientation that is efficient for fast, direct electron transfer. High hydrogen-oxidation current densities are maintained for up to one week, the only limitation being the intrinsic stability of the enzyme. We also show that covalent attachment has no effect on the catalytic properties of the enzyme, which means that this strategy can also used be for electrochemical studies of the catalytic mechanism. [ABSTRACT FROM AUTHOR]

Clostridium acetobutylicum is not able to grow on glycerol as the sole carbon source since it cannot reoxidize the excess of NADH generated by glycerol catabolism. Nevertheless, when the pSPD5 plasmid, carrying the NADH-consuming 1,3-propanediol pathway from C. butyricum VPI 3266, was introduced into C. acetobutylicum DG1, growth on glycerol was achieved, and 1,3-propanediol was produced. In order to compare the physiological behavior of the recombinant C. acetobutylicum DG1(pSPD5) strain with that of the natural 1,3-propanediol producer C. butyricum VPI 3266, both strains were grown in chemostat cultures with glycerol as the sole carbon source. The same "global behavior" was observed for both strains: 1,3-propanediol was the main fermentation product, and the qH2 flux was very low. However, when looking at key intracellular enzyme levels, significant differences were observed. Firstly, the pathway for glycerol oxidation was different: C. butyricum uses a glycerol dehydrogenase and a dihydroxyacetone kinase, while C. acetobutylicum uses a glycerol kinase and a glycerol-3-phosphate dehydrogenase. Secondly, the electron flow is differentially regulated: (i) in C. butyricum VPI 3266, the in vitro hydrogenase activity is 10-fold lower than that in C. acetobutylicum DG1(pSPD5), and (ii) while the ferredoxin-NAD+ reductase activity is high and the NADH-ferredoxin reductase activity is low in C. acetobutylicum DG1(pSPD5), the reverse is observed for C. butyricum VPI 3266. Thirdly, lactate dehydrogenase activity is only detected in the C. acetobutylicum DG1(pSPD5) culture, explaining why this microorganism produces lactate. [ABSTRACT FROM AUTHOR]

The molecular characterization of a B12-independent glycerol dehydratase from Clostridium butyricum has recently been reported [Raynaud, C., et al. (2003) Proc. Natl. Acad. Sci. U.S.A. 100, 5010- 5015]. In this work, we have further characterized this system by biochemical and crystallographic methods. Both the glycerol dehydratase (GD) and the GD-activating enzyme (GD-AE) could be purified to homogeneity under aerobic conditions. In this form, both the GD and GD-AE were inactive. A reconstitution procedure, similar to what has been reported for pyruvate formate lyase activating enzyme (PFL-AE), was employed to reconstitute the activity of the GD-AR Subsequently, the reconstituted GD-AE could be used to reactivate the GD under strictly anaerobic conditions. We also report here the crystal structure of the inactive GD in the native (2.5 Å resolution, Rcryst = 17%, Rfree = 20%), glycerol-bound (1.8 Å resolution, Rcryst = 21%, Rfree 24%), and 1 ,2 -propanediol-bound (2.4 Å resolution, Rcryst = 20%, Rfree = 24%) forms. The overall fold of the GD monomer was similar to what has been observed for pyruvate formate lyase (PFL) and anaerobic ribonucleotide reductase (ARNR), consisting of a 10-stranded β/α. barrel motif. Clear density was observed for both substrates, and a mechanism for the dehydration reaction is presented. This mechanism clearly supports a concerted pathway for migration of the OH group through a cyclic transition state that is stabilized by partial protonation of the migrating OH group. Finally, despite poor alignment (rmsd ∼ 6.8 Å) of the 10 core strands that comprise the barrel structure of the GD and PFL, the C-terminal domains of both proteins align well (rmsd ∼ 0.7 Å) and have structural properties consistent with this being the docking site for the activating enzyme. A single point mutation within this domain, at a strictly conserved arginine residue (R782K) in the GD, resulted in formation of a tight protein-protein complex between the GD and the GD-AE in vivo, thereby supporting this hypothesis. [ABSTRACT FROM AUTHOR]