Search

In this article, a new concept to improve the angular stability of linear-to-circular polarizing reflectors is presented. It is first explicitly demonstrated that existing design approaches heavily rely on the adjustment of the design stack-up, namely, the substrate height and relative permittivity, to the desired operating frequency. An approach is then proposed for decoupling the performance from the substrate parameters. The proposed approach provides increased design flexibility, resulting in performance improvement. Insight on the operating principle is provided resorting to equivalent circuit models. Subsequently, the benefits of the angularly stable reflection polarizer are demonstrated by a practical example involving a multiple beam antenna implemented using materials and processes compatible with satellite missions. The antenna exploits an innovative quasi-optical beamformer as primary feed combined with a cylindrical polarizing reflector. Numerical and experimental results from this antenna architecture are presented to confirm the improvements achieved with the proposed concept over existing designs. The close comparison of simulations with measurements that are achieved validates the concept and the design approach. [ABSTRACT FROM AUTHOR]

A fast and efficient synthesis procedure for a new class of low-profile frequency selective electromagnetic absorbers with well-defined absorption and reflection bands as well as steep selectivity between the two is proposed. One contribution of this work lies with the combined use of nonresonant subwavelength capacitive and inductive arrays, which leads to low-profile polarization-insensitive and angularly stable designs. Another novelty stems from the use of rigorous synthesis techniques that enable efficiently selecting the cutoff frequencies, reflectivity level, and skirt selectivity for an arbitrary order of the absorption response. Significantly, here we investigate for the first time the out-of-band characteristics of flat absorbers and demonstrate designs which, at frequencies lower than the absorption band, present high reflectivity with a flat reflection phase. Beyond traditional applications, such as stealth, the combination of a well-defined absorption band with such out-of-band reflection properties makes the proposed frequency-selective absorbers pertinent for dual-band satellite-communication antenna reflectors with congruent beams in transmit and receive bands, where the ratio of 1:1.5 between the two bands is normally required. [ABSTRACT FROM PUBLISHER]