Search

In this study, the cellulose and hemicelluloses in heartwood, sapwood, and bark of E. urophylla × E. grandis were comprehensively investigated. The ultrastructural topochemistry of carbohydrates in cell walls was examined in situ by confocal Raman microscopy. Cellulose and alkali-extractable hemicelluloses samples were isolated from different tissues and comparatively characterized by compositional carbohydrate analyses, determination of molecular weights, FT-IR spectroscopy, and XRD and NMR techniques. It was found that among all of the samples, heartwood cellulose had the highest molecular weight as well as the lowest degree of crystallinity. Meanwhile the hemicelluloses in heartwood had higher xylose content, lower degree of branching, slightly lower molecular weights but narrower polydispersity than those in sapwood. The eucalyptus hemicelluloses mainly consisted of (1→4)-β- D -xylan backbone with glucuronic acid side chains. Furthermore, the hemicelluloses isolated from sapwood had a higher degree of substitution with terminal galactose than those isolated from heartwood and bark., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

Understanding the distribution and structural features of lignin in heartwood, sapwood, and bark of terrestrial plants is important to optimize the industrial utilization of lignocellulose. In this work, the lignins in heartwood, sapwood, and bark of Eucalyptus urophylla × E. grandis were comparatively studied. Confocal Raman microscopy was used to probe the heterogeneity of lignin distribution in situ. The swollen residual enzyme lignin samples were isolated and systematically characterized to determine the structural differences. The results showed that the content and molecular weights of lignin gradually decreased in the order of heartwood, sapwood, and bark. The S/G ratios of heartwood lignin (3.45) and sapwood lignin (2.74) suggested the increase of deposited S-type lignin with the maturity of wood. The bark lignin exhibited a high frequency of β-O-4' linkages and showed a unique substructural pattern with the absence of spirodienone substructures and p-hydroxycinnamyl alcohol end-groups., (Copyright © 2018. Published by Elsevier B.V.)

In the present study, lignin from eucalyptus was extracted with 80% alkaline dioxane (0.05 M NaOH) from ball-milled wood and subsequently fractionated by gradient acid precipitation from the filtrate. Meanwhile, the residual lignin was prepared by a double enzymatic hydrolysis process. The yield of the lignin extracted by alkaline dioxane (L A-2 ) was 29.5%. The carbohydrate contents and molecular weights of the gradient acid precipitated lignin fractions gradually decreased from 4.90 to 1.36% and from 7770 to 5510 g/mol, respectively, with the decline of the pH value from 6 to 2. Results from two-dimensional heteronuclear single quantum coherence nuclear magnetic resonance (NMR) and 31 P NMR spectroscopy showed an evident reduction of β- O-4 ' linkages with the pH value decrease, while the contents of aliphatic -OH, phenolic -OH, and carboxylic groups displayed an increasing trend. Moreover, the residual lignin exhibited the highest molecular weight (11690 g/mol), the most abundant β- O-4 ' linkages (71.1%), and the highest S/G ratio (4.68).

Main Conclusion: Six types of lignin-carbohydrate complex (LCC) fractions were isolated from Eucalyptus. The acidic dioxane treatment applied significantly improved the yield of LCCs. The extraction conditions had a limited impact on the LCC structures and linkages. Characterization of the lignin-carbohydrate complex (LCC) structures and linkages promises to offer insight on plant cell wall chemistry. In this case, Eucalyptus LCCs were extracted by aqueous dioxane, and then precipitated sequentially by 70% ethanol, 100% ethanol, and acidic water (pH = 2). The composition and structure of the six LCC fractions obtained by selective precipitation were investigated by sugar analysis, molecular weight determination, and 2D HSQC NMR. It was found that the acidic (0.05-M HCl) dioxane treatment significantly improved the yield of LCCs (66.4% based on Klason lignin), which was higher than the neutral aqueous dioxane extraction, and the extraction condition showed limited impact on the LCC structures and linkages. In the fractionation process, the low-molecular-weight LCCs containing a high content of carbohydrates (60.3-63.2%) were first precipitated by 70% ethanol from the extractable solution. The phenyl glycoside (PhGlc) bonds (13.0-17.0 per 100Ar) and highly acetylated xylans were observed in the fractions recovered by the precipitation with 100% ethanol. On the other hand, such xylan-rich LCCs exhibited the highest frequency of β-O-4 linkages. The benzyl ether (BE) bonds were only detected in the fractions obtained by acidic water precipitation.

A clear elucidation of structural feature of whole lignin in plant cell wall is of great importance for understanding lignin biosynthesis mechanism and developing lignin based chemicals or materials under the current biorefinery scenario. Swollen residual enzyme lignin (SREL) has been identified as an ideal representative for native lignin in the plant walls. To investigate the influence of preswelling conditions on the structural features, the SREL obtained through preswelling the ball-milled Eucalyptus wood powder in 2, 4 and 8% NaOH solutions and subsequent in-situ enzymatic hydrolysis were thoroughly characterized. A cellulolytic enzyme lignin (CEL) was also prepared as a comparison. The quantitative NMR analyses indicated that the relative contents of β-O-4' linkages in SRELs were higher than that in CEL. The lignin structure tended to undergo more destruction with the elevated NaOH concentration. A relatively low NaOH concentration (2% in this study), which could be applied to effectively remove hemicelluloses and transform cellulose structure from cellulose I to cellulose II, was competent to prepare SREL as an ideal representative for the protolignin. An optimization of SREL preparation was essential for a better understanding of the whole protolignin.

In the present study, Eucalyptus was subjected to organosolv pretreatment processes with aqueous 2-propanol at 200-220°C to obtain lignin with benign characters for its valorization and digestible substrates for bioethanol production. Results showed that different delignification ratios (64.00%-81.26%) and molecular weights (M w =610-2680g/mol) of lignin fractions were dissociated from various pretreatment conditions, and the glucose yields of all the pretreated substrates significantly increased to 54.65-88.59% as compared to that of raw material (9.20%). Additionally, the amounts of β-O-4, β-β, and β-5 substructures were regularly decreased with the increased temperature and time. By contrast, the structural characteristics of the lignin fractions obtained with 70% 2-PrOH/water were less-altered than those with 50% 2-PrOH/water pretreatment. Remarkably, lignin with the lowest molecular weight (M w =610g/mol) and less-altered chemical structure was achieved at 200°C for 120min, which is beneficial to subsequent catalytic degradation of lignin., (Copyright © 2017 Elsevier B.V. All rights reserved.)

An integrated process based on ionic liquids ([Bmim]Cl and [Bmim]OAc) pretreatment and successive alkali post-treatments (0.5, 2.0, and 4.0% NaOH at 90°C for 2h) was performed to isolate lignins from Eucalyptus. The structural features and spatial distribution of lignin in the Eucalyptus cell wall were investigated thoroughly. Results revealed that the ionic liquids pretreatment promoted the isolation of alkaline lignin from the pretreated samples without obvious structural changes. Additionally, the integrated process resulted in syringyl-rich lignin macromolecules with more β-O-4' linkages and less phenolic hydroxyl groups. Confocal Raman microscopy analysis showed that the dissolution behavior of lignin was varied in the morphologically distinct regions during the successive alkali treatments, and lignin dissolved was mainly stemmed from the secondary wall regions. These results provided some useful information for understanding the mechanisms of delignification during the integrated process and enhancing the potential utilizations of lignin in future biorefineries., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

In this study, Eucalyptus camaldulensis was pretreated with 0.02 M aluminum chloride (AlCl3) at 140-180 °C to obtain digestible substrates for glucose and lignin. The effects of AlCl3-catalyzed hydrothermal pretreatment on the degradation of carbohydrates, structural changes of lignin, crystallinity, morphologic changes, and cellulose conversion of the pretreated biomass have been investigated by HAPEC, HPLC, FT-IR, XRD, CP/MAS NMR, SEM, and 2D-HSQC NMR. Results showed that the pretreatment significantly removed hemicelluloses and cleaved β-O-4 linkages of lignin at high temperatures. Under an optimum condition (at 170 °C for 1 h), almost all of hemicelluloses were removed and most of β-O-4 linkages in lignin were cleaved, and 77.8% cellulose conversion of the pretreated biomass was achieved, which was 7.3-fold higher than that of the original biomass. In short, this process was regarded as a promising approach to achieve an efficient conversion of lignocellulosic biomass to fermentable glucose and residual lignin., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

The application of the acidic ionic liquid (IL), 1-butyl-3-methylimidazolium hydrogensulfate ([bmim]HSO4), as a catalyst in the hydrothermal microwave treatment (HMT) and green upgradation of eucalyptus biomass has been investigated. The process was carried out in a microwave reactor system at different temperatures (140-200°C) and evaluated for severities. The xylooligosaccharides (XOS, refers to a DP of 2-6) yield up to 5.04% (w/w) of the initial biomass and 26.72% (w/w) of xylan were achieved. Higher temperature resulted in lower molecular weight product, and enhanced the concentration of monosaccharides and byproducts. The morphology and structure of the solid residues were performed using an array of techniques, such as SEM, XRD, FTIR, BET surface area, and CP/MAS (13)C NMR, by which the increase of crystallinity, the destruction of surface structure, and the changes in functional groups and compositions were studied after the pretreatment, thus significantly enhancing the enzymatic hydrolysis., (Copyright © 2015 Elsevier Ltd. All rights reserved.)

Eucalyptus was sequentially extracted with 70% ethanol containing 0.4, 1.0, 2.0, 3.0, and 5.0% NaOH for 2h at 80°C. The chemical composition and structural features of the hemicellulosic fractions obtained were comparatively characterized by the combination of high-performance anion-exchange chromatography, gel permeation chromatography, Fourier transform infrared, and nuclear magnetic resonance spectroscopies. Furthermore, the main component distribution and their changes in cell wall were investigated by confocal Raman microscopy. Based on the Fourier transform infrared and nuclear magnetic resonance analyses, the hemicelluloses extracted from Eucalyptus mainly have a linear backbone of (1→4)-linked-β-d-xylopyranosyl residues decorated with branch at O-2 of 4-O-methyl-α-glucuronic acid unit. Raman analysis revealed that the dissolution of hemicelluloses was different in the morphological regions, and the hemicelluloses released mainly originated from the secondary wall. The information obtained from the study conducted by combining chemical characterization with ultrastructure provides important basis for studying the mechanism of the alkali treatment., (Copyright © 2015 Elsevier Ltd. All rights reserved.)

Eucalyptus grandis fibers were treated with hot-compressed water (HCW) and laccase mediator to enhance the fiber characteristics and to produce an active lignin substrate for binderless fiberboard production. The composition, morphology, and crystallinity index (CrI) analysis of fibers showed that the HCW treatment increased the CrI and lignin content of the treated fibers through partial removal of hemicelluloses. Simultaneously, the HCW treatment produced some granules and holes on the surface of the fibers, which possibly facilitated the accessibility of the laccase mediator. Milled wood lignins and enzymatic hydrolysis lignins isolated from the control and treated fibers were comparatively characterized. A reduction of molecular weight was observed, which indicated that a preferential degradation of lignin occurred after exposure to the laccase mediator. Quantitative (13)C, 2D-HSQC and (31)P NMR characterization revealed that the integrated treatment resulted in the cleavage of β-O-4' linkages, removal of G' (oxidized α-ketone) substructures, and an increase in the S/G ratio and free phenolic hydroxyls.

In this work, the structural features of the lignin isolated with 2% NaOH at 90°C for 2.5h from the hydrothermally pretreated eucalyptus fibers at different temperatures (100-200°C) for different times (15-60min) were thoroughly investigated. Results showed that the hydrothermal pretreatment facilitated the separation of alkali lignin from the pretreated fibers. It was found that the linkages of β-O-4, β-β, and β-5 decreased gradually with the increase of hydrothermal severity. Furthermore, decreased molecular weights (1630-510g/mol), associated carbohydrates contents (1.99-0.05%) and aliphatic OH contents (3.37-0.65mmol/g), and increased phenolic OH contents (0.71-2.98mmol/g) and thermal stability of the alkali lignins were observed with the increase of the hydrothermal severity., (Copyright © 2014 Elsevier Ltd. All rights reserved.)

In this study, an environmental-friendly hydrothermal pretreatment of Eucalyptus fiber followed with alkali post-treatment was developed to produce bioethanol efficiently. This biorefinery process allowed all major components of biomass being converted into high value-added products. The chemical and structural features of the residual hemicelluloses isolated with alkali from the hydrothermal pretreated Eucalyptus fiber, were comparatively investigated. Sugar and spectral analyses indicated that the hemicelluloses were mainly composed of glucuronoxylans, and especially hemicelluloses prepared at higher temperature (180°C) contained higher contents of glucomannans and α-glucan. Hydrothermal pretreatment resulted in a significant hydrolysis of the glycosidic linkages in xylan backbone, and thus the molecular weight of the hemicelluloses was significantly reduced from 56,520 to 7780g/mol with the increase of temperature. This suggested that a combination of hydrothermal pretreatment at low temperatures (100-140°C) and alkali post-treatment was an effective technique for isolating of hemicelluloses from Eucalyptus fiber., (Copyright © 2014 Elsevier B.V. All rights reserved.)

Effective delignification of lignocelluloses is a very important to guarantee the economic feasibility of organosolv-based biorefinery. Eucalyptus chips were successively subjected to organosolv pretreatment (AEOP) and extended delignification (ED) process in the present study. The effects of delignification processes were scientifically evaluated by component analysis, SEM, and CP-MAS NMR techniques. It was found that the integrated process of organosolv pretreatment and subsequent delignification resulted in an effective delignification. The fundamental chemistry of the lignin obtained after these processes was thoroughly investigated by FT-IR, multidimensional NMR ((31)P-, (13)C-, and 2D-HSQC NMR), and GPC techniques. It was observed that an extensive cleavage of aryl ether linkages, ethoxylation, and some condensation reactions occurred in AEOP process, while α-oxidation mainly took place in alkaline hydrogen peroxide (AHP) process. It is believed that better understanding the fundamental chemistry of lignin facilitates the optimization of the delignification process. More importantly, well-defined of lignin polymers will facilitate their value-added applications in current and future biorefineries.

Succinoylation and benzoylation of ball-milled eucalyptus wood using succinic anhydride and benzoyl chloride as acylating reagent, respectively, were investigated at room temperature using dimethyl sulfoxide/N-methylimidazole (DMSO/NMI) as reaction medium without additional catalysts. The effects of the corresponding acylating reagent dosage (1-5:1 for succinoylation and 0.5-5:1 for benzoylation) and reaction time (0.35-5h for succinoylation and 0.5-3h for benzoylation) on the extent of acylation, measured by weight percent gain (WPG), were studied. WPG of succinoylation and benzoylation was in the range of 70.8-144.7% and 17.3-43.1%, respectively. The efficiency of acylation at room temperature significantly increased in DMSO/NMI compared with ionic liquid 1-butyl-3-methylimidazolium chloride because of the role of NMI as solvent, base and catalyst. Fourier transform infrared (FT-IR), and solid-state cross-polarization/magic-angle spinning (CP/MAS) (13)C nuclear magnetic resonance (NMR) spectroscopy studies provided evidence for the occurrence of succinoylation and benzoylation reactions and the attachment of functional groups via ester bonds., (Copyright © 2012 Elsevier Ltd. All rights reserved.)

A three-step sequential extraction-precipitation method was used to isolate lignin from Eucalyptus tereticornis. The ball-milled eucalyptus was extracted with 96% dioxane, 50% dioxane, and 80% dioxane containing 1% NaOH at boiling temperature, consecutively resulting in solubilization of lignin and hemicelluloses. By precipitating such solutions into 70% aqueous ethanol, the hemicelluloses were removed substantially although there were still some carbohydrates left over, especially for lignin fraction extracted by 50% dioxane. Lignins dissolved in the 70% ethanol solutions were recovered via concentration and precipitation into acidified water. About 37% of the original lignin was released following such procedure whereas only 13.5% can be isolated by traditional milled wood lignin (MWL) method. The obtained lignin fractions were analyzed by high performance anion exchange chromatography (HPAEC) following acid hydrolysis for sugar composition of the contaminating carbohydrates and characterized by quantitative (31)P NMR as well as two-dimensional heteronuclear single-quantum coherence ((13)C-(1)H) NMR. The results showed that 96% aqueous dioxane extraction of ball-milled wood under conditions used in this study resulted in lignin preparation with very similar structures and sugar composition as traditional MWL. Therefore extracting ball-milled wood with 96% aqueous dioxane produced lignin in 33.6% yield, which makes it very attractive as an alternative to the traditional MWL method. However further extraction with 50% aqueous dioxane or 80% aqueous dioxane containing 1% NaOH gave just a little more lignins with different carbohydrate compositions from those in MWL. The eucalyptus lignins obtained were syringyl and guaiacyl type units. Lignin fraction obtained from 96% dioxane extraction was found to have more phenolic hydroxyl and less aliphatic hydroxyl than the other two preparations.