Search

External gear pumps are one of the most commonly used types of positive displacement machines in high pressure hydraulic control systems, fuel-injection and fuel transport systems. Despite many merits of the traditional external gear pump design with involute teeth, the significant flow non-uniformity intrinsic of such design is considered to be a detrimental aspect, since it causes undesired noise emissions and mechanical vibrations. A disruptive concept of continuous-contact helical gear pumps (CCHGP) was proposed and successfully commercialized in the recent past. Such concept was proven to have clear advantages in terms of noise emissions. However, a clear interpretation of the displacing action and the transient features of the delivery flow was never addressed in past literature. This paper addresses this gap by first discussing the family of gear profiles suitable for implementing the CCHGP design. Subsequently, an analysis on the kinematic flow ripple is given, showing how such design concept can reduce or even eliminate the kinematic flow pulsations. The paper also presents a numerical approach for modelling the operation of CCHGPs, starting from the modeling of the geometric features necessary for a fluid dynamic analysis based on a lumped parameter approach. For model validation purposes, a commercial CCHGP was tested at the authors’ research center, and the simulation results were compared against the experiments, to show the level of accuracy of the model, as well as it potentials for future design studies. [ABSTRACT FROM AUTHOR]

Abstract: In this paper an innovative procedure for determining the optimal design of an external spur gear pump for a particular emission reduction application in automobiles has been proposed. The pump forms the main part of a mechatronic system that controls the flow rate of a mixture of urea in water to catalytically reduce emissions in diesel engines. The proposed research proves to be an advance in gear machine design by using a multi-objective based genetic algorithm, to determine the optimal design of the gears and the casing by maximizing the volumetric efficiency, minimizing pressure overshoots, localized cavitation and noise emissions. The research uses HYGESim (HYdraulic GEar machines Simulator) simulation tool, which is being developed by the authors’ research group, for calculating the important performance features of the machine. The best designs for the machine based on enhancement in performance are presented. Results in terms of simulations and tests which validate the effectiveness of the proposed novel design methodology are also presented. [Copyright &y& Elsevier]

• A fully coupled multi-domain multi-physics dynamic system is presented. • Three components of the loadings are explained and analyzed in detail. • The patterns of 3D transient loadings and dynamics are discussed with simulation results. • A design routine for the axial balancing mechanism of helical gear pumps is provided. • The pattern of wear seen from experiments can be replicated by the wear model. This paper presents a multi-domain dynamic simulation model for continuous-contact helical gear pumps, which is an unconventional hydraulic pump design that is capable of canceling its kinematic flowrate variation. In this model, the fluid dynamics (in its lumped-element representation) are fully coupled in a closed feedback loop with other physical domains, including critical tribological interfaces, 3D dynamic loadings on the solid parts, dynamics, and micro-vibrations of the rotors. The model is compared to the analytical derivation and experimental measurements to prove its validity. The model can be used to provide predictive simulations for existing designs, or as a tool to optimize the design to provide better hydrostatic balancing for future iterations of hydraulic pump designs. [ABSTRACT FROM AUTHOR]

External gear pumps are among the most popular fluid power positive displacement pumps, however they often suffer of excessive flow pulsation transmitted to the downstream circuit. To meet the increasing demand of quiet operation for modern fluid power system, a better understanding of the ripple source of gear pumps is desirable. This paper presents a novel approach for the analysis of the ripple source of gear pumps based on decomposition into a kinematic component and a pressurization component. The pump ripple can be regarded as the superposition of the displacement solution and the pressurization solution. The displacement solution is driven by the kinematic flow, and it can be derived from the kinematic flow theory; instead, the pressurization solution can be approximated by overlapping the pressurization flow for a single displacement chamber. Furthermore, in this way the changes of these two components with modification of the delivery circuit are determined in both analytical and numerical ways. The result of this analysis provides a good interpretation of the pulsation simulated by a detailed lumped-parameter simulation model, thus showing its validity. The result also indicates that the response of two ripple sources to the change of the loading in the downstream hydraulic circuit is very different. These findings reveal the limitation of the traditional experimental method for determining the pump ripple, that new experimental methods which are more physics-based can be potentially formulated based on this work. [ABSTRACT FROM AUTHOR]