Search

Mesenchymal stem cells (MSCs) are considered as a promising alternative for the treatment of various inflammatory disorders. However, poor viability and engraftment of MSCs after transplantation are major hurdles in mesenchymal stem cell therapy. Extracellular matrix (ECM)-coated scaffolds provide better cell attachment and mechanical support for MSCs after transplantation. A single-step method for ECM functionalization on poly(lactic-co-glycolic acid) (PLGA) microspheres using a novel compound, dopamine-conjugated poly(ethylene-alt-maleic acid), as a stabilizer during the preparation of microspheres is reported. The dopamine molecules on the surface of microspheres provide active sites for the conjugation of ECM in an aqueous solution. The results reveal that the viability of MSCs improves when they are coated over the ECM-functionalized PLGA microspheres (eMs). In addition, the incorporation of a broad-spectrum caspase inhibitor (IDN6556) into the eMs synergistically increases the viability of MSCs under in vitro conditions. Intraperitoneal injection of the MSC-microsphere hybrid alleviates experimental colitis in a murine model via inhibiting Th1 and Th17 differentiation of CD4 + T cells in colon-draining mesenteric lymph nodes. Therefore, drug-loaded ECM-coated surfaces may be considered as attractive tools for improving viability, proliferation, and functionality of MSCs following transplantation., (© 2019 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Due to avascular and hypocellular nature of cartilage, repair of articular cartilage defects within synovial joints still poses a significant clinical challenge. To promote neocartilage properties, we established a functional scaffold named APM-E7 by conjugating a bone marrow-derived mesenchymal stem cell (BM-MSC) affinity peptide (E7) onto the acellular peritoneum matrix (APM). During in vitro culture, the APM-E7 scaffold can support better proliferation as well as better differentiation into chondrocytes of BM-MSCs. After implanting into cartilage defects in rabbits for 24weeks, compared with microfracture and APM groups, the APM-E7 scaffolds exhibited superior quality of neocartilage without transplant rejection, according to general observations, histological assessment, synovial fluid analysis, magnetic resonance imaging (MRI) and nanomechanical properties. This APM-E7 scaffold provided a scaffold for cell attachment, which was crucial for cartilage regeneration. Overall, the APM-E7 is a promising biomaterial with low immunogenicity for one-step cartilage repair by promoting autologous connective tissue progenitor (CTP) attachment., Statement of Significance: We report the one-step transplantation of functional acellular peritoneum matrix (APM-E7) with specific mesenchymal stem cell recruitment to repair rabbit cartilage injury. The experimental results illustrated that the APM-E7 scaffold was successfully fabricated, which could specifically recruit MSCs and fill the cartilage defects in the femoral trochlear of rabbits at 24weeks post-surgery. The repaired tissue was hyaline cartilage, which exhibited ideal mechanical stability. The APM-E7 biomaterial could provide scaffold for MSCs and improve cell homing, which are two key factors required for cartilage tissue engineering, thereby providing new insights into cartilage tissue engineering., (Copyright © 2017 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.)

Background: Decellularization of tendon tissue plays a pivotal role in current tissue engineering approaches for in vitro research as well as for translation of graft-based tendon restoration into clinics. Automation of essential decellularization steps like freeze-thawing is crucial for the development of more standardized decellularization protocols and commercial graft production under good manufacturing practice (GMP) conditions in the future., Methods: In this study, a liquid nitrogen-based controlled rate freezer was utilized for automation of repeated freeze-thawing for decellularization of equine superficial digital flexor tendons. Additional tendon specimens underwent manually performed freeze-thaw cycles based on an established procedure. Tendon decellularization was completed by using non-ionic detergent treatment (Triton X-100). Effectiveness of decellularization was assessed by residual nuclei count and calculation of DNA content. Cytocompatibility was evaluated by culturing allogeneic adipose tissue-derived mesenchymal stromal cells on the tendon scaffolds., Results: There were no significant differences in decellularization effectiveness between samples decellularized by the automated freeze-thaw procedure and samples that underwent manual freeze-thaw cycles. Further, we inferred no significant differences in the effectiveness of decellularization between two different cooling and heating rates applied in the automated freeze-thaw process. Both the automated protocols and the manually performed protocol resulted in roughly 2% residual nuclei and 13% residual DNA content. Successful cell culture was achieved with samples decellularized by automated freeze-thawing as well as with tendon samples decellularized by manually performed freeze-thaw cycles., Conclusions: Automated freeze-thaw cycles performed by using a liquid nitrogen-based controlled rate freezer were as effective as previously described manual freeze-thaw procedures for decellularization of equine superficial digital flexor tendons. The automation of this key procedure in decellularization of large tendon samples is an important step towards the processing of large sample quantities under standardized conditions. Furthermore, with a view to the production of commercially available tendon graft-based materials for application in human and veterinary medicine, the automation of key procedural steps is highly required to develop manufacturing processes under GMP conditions.

To assess the effect of basic fibroblast growth factor-binding extracellular matrix (bFGF-ECM) combined with bone marrow mesenchymal stem cells (BMSCs) transplantation on acute myocardial infarction (AMI) and explore the underlying mechenisms. Rabbit hearts were processed by decellularization with sodium dodecyl sulfate (SDS) perfusion, heparin immobilization, bFGF-binding and homogenization, for preparation of bFGF-binding cardiac ECM suspension (bFGF-ECM). Thereafter, the characteristics of bFGF release were analyzed in vitro. Following ligation of the mid-third of the left anterior descending artery, the rabbits were divided into a control group (no treatment), BMSCs group (BMSCs transplantation), bFGF-ECM group (bFGF-ECM implantation), and BMSCs + bFGF-ECM group (BMSCs and bFGF-ECM implantation). Apoptosis and differentiation of implanted BMSCs, and the left ventricular (LV) remodeling and function were assessed. The ex vivo proliferation, apoptosis, migration and differentiation of BMSCs were determined after exposure to bFGF and/or ECM. The ECM could sustainably release bFGF. 24 h and 6 weeks after the operation, improved viability and differentiation of the implanted BMSCs, as well as inhibited dilatation and preserved function of the left ventricle (LV), were significant in the BMSCs  +  bFGF-ECM group compared with other groups (P < 0.05), although BMSCs and ECM-bFGF groups also showed better results than control group (P < 0.05). Additionally, ECM and bFGF showed a synergistic effect on BMSCs proliferation, viability, migration and differentiation. The combination of bFGF-binding ECM and BMSCs implantation may promote myocardial regeneration and LV function, and become a new strategy for the treatment of AMI.

Clinical translation of tissue engineered therapeutics is hampered by the significant logistical and regulatory challenges associated with such products, prompting increased interest in the use of decellularized extracellular matrix (ECM) to enhance endogenous regeneration. Most bones develop and heal by endochondral ossification, the replacement of a hypertrophic cartilaginous intermediary with bone. The hypothesis of this study is that a porous scaffold derived from decellularized tissue engineered hypertrophic cartilage will retain the necessary signals to instruct host cells to accelerate endogenous bone regeneration. Cartilage tissue (CT) and hypertrophic cartilage tissue (HT) were engineered using human bone marrow derived mesenchymal stem cells, decellularized and the remaining ECM was freeze-dried to generate porous scaffolds. When implanted subcutaneously in nude mice, only the decellularized HT-derived scaffolds were found to induce vascularization and de novo mineral accumulation. Furthermore, when implanted into critically-sized femoral defects, full bridging was observed in half of the defects treated with HT scaffolds, while no evidence of such bridging was found in empty controls. Host cells which had migrated throughout the scaffold were capable of producing new bone tissue, in contrast to fibrous tissue formation within empty controls. These results demonstrate the capacity of decellularized engineered tissues as 'off-the-shelf' implants to promote tissue regeneration., (Copyright © 2015 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.)

Following an endochondral approach to bone regeneration, multipotent stromal cells (MSCs) can be cultured on a scaffold to create a cartilaginous callus that is subsequently remodeled into bone. An attractive scaffold material for cartilage regeneration that has recently regained attention is decellularized cartilage-derived matrix (CDM). Since this material has shown potential for cartilage regeneration, we hypothesized that CDM could be a potent material for endochondral bone regeneration. In addition, since decellularized matrices are known to harbor bioactive cues for tissue formation, we evaluated the need for seeded MSCs in CDM scaffolds. In this study, ectopic bone formation in rats was evaluated for CDM scaffolds seeded with human MSCs and compared with unseeded controls. The MSC-seeded samples were preconditioned in chondrogenic medium for 37 days. After 8 weeks of subcutaneous implantation, the extent of mineralization was significantly higher in the MSC-seeded constructs versus unseeded controls. The mineralized areas corresponded to bone formation with bone marrow cavities. In addition, rat-specific bone formation was confirmed by collagen type I immunohistochemistry. Finally, fluorochrome incorporation at 3 and 6 weeks revealed that the bone formation had an inwardly directed progression. Taken together, our results show that decellularized CDM is a promising biomaterial for endochondral bone regeneration when combined with MSCs at ectopic locations. Modification of current decellularization protocols may lead to enhanced functionality of CDM scaffolds, potentially offering the prospect of generation of cell-free off-the-shelf bone regenerative substitutes.

Purpose: It is well known that implanting a bioactive scaffold into a cartilage defect site can enhance cartilage repair after bone marrow stimulation (BMS). However, most of the current scaffolds are derived from xenogenous tissue and/or artificial polymers. The implantation of these scaffolds adds risks of pathogen transmission, undesirable inflammation, and other immunological reactions, as well as ethical issues in clinical practice. The current study was undertaken to evaluate the effectiveness of implanting autologous bone marrow mesenchymal stem cell-derived extracellular matrix (aBMSC-dECM) scaffolds after BMS for cartilage repair., Methods: Full osteochondral defects were performed on the trochlear groove of both knees in 24 rabbits. One group underwent BMS only in the right knee (the BMS group), and the other group was treated by implantation of the aBMSC-dECM scaffold after BMS in the left knee (the aBMSC-dECM scaffold group)., Results: Better repair of cartilage defects was observed in the aBMSC-dECM scaffold group than in the BMS group according to gross observation, histological assessments, immunohistochemistry, and chemical assay. The glycosaminoglycan and DNA content, the distribution of proteoglycan, and the distribution and arrangement of type II and I collagen fibers in the repaired tissue in the aBMSC-dECM scaffold group at 12 weeks after surgery were similar to that surrounding normal hyaline cartilage., Conclusions: Implanting aBMSC-dECM scaffolds can enhance the therapeutic effect of BMS on articular cartilage repair, and this combination treatment is a potential method for successful articular cartilage repair.

This study was aimed to develop an ECM-derived biphasic scaffold and to investigate its regeneration potential loaded with BM-MSCs in repair of large, high-load-bearing osteochondral defects of the canine femoral head. The scaffolds were fabricated using cartilage and bone ECM as a cartilage and bone layer, respectively. Osteochondral constructs were fabricated using induced BM-MSCs and the scaffold. Osteochondral defects (11 mm diameter × 10 mm depth) were created on femoral heads of canine and treated with the constructs. The repaired tissue was evaluated for gross morphology, radiography, histological, biomechanics at 3 and 6 months after implantation. Radiography revealed that femoral heads slightly collapsed at 3 months and severely collapsed at 6 months. Histology revealed that some defects in femoral heads were repaired, but with fibrous tissue or fibrocartilage, and femoral heads with different degrees of collapse. The bone volume fraction was lower for subchondral bone than normal femoral bone at 3 and 6 months. Rigidity was lower in repaired subchondral bone than normal femoral bone at 6 months. The ECM-derived, biphasic scaffold combined with induced BM-MSCs did not successfully repair large, high-load-bearing osteochondral defects of the canine femoral head. However, the experience can help improve the technique of scaffold fabrication and vascularization.

A potential therapy to enhance healing of bone tissue is to deliver isolated mesenchymal stem cells (MSCs) to the site of a lesion to promote bone formation. A key issue within this technology is the development of an injectable system for the delivery of MSCs. Fibrin gel exploits the final stage of the coagulation cascade in which fibrinogen molecules are cleaved by thrombin, convert into fibrin monomers and assembled into fibrils, eventually forming fibers in a three-dimensional network. This gel could have many advantages as a cell delivery vehicle in terms of biocompatibility, biodegradation and hemostasis. The objective of this study was to explore the possibility of using fibrin gel as a delivery system for human MSCs (HMSCs). To this end we have determined the optimal fibrinogen concentrations and thrombin activity for loading HMSCs in vitro into the resultant fibrin gels to obtain cell proliferation. We found that a concentration of 18 mg/ml of fibrinogen and a thrombin activity of 100 IU/ml was optimal for producing fibrin scaffolds that would allow good HMSCs spreading and proliferation. In these conditions, cells were able to proliferate and expressed alkaline phosphatase, a bone marker, in vitro. When implanted in vivo, HMSCs were able to migrate out of the fibrin gel and invade a calcium carbonate based ceramic scaffold suggesting that fibrin gel could serve as a delivery system for HMSCs.