Search

Nowadays, smart monitoring devices such as digital fault indicator (DFI) have been installed in distribution systems to provide sufficient information for fault location. However, it is still a challenge to extract effective features from massive data for single-line-to-ground (SLG) fault-section location. This work proposes a novel method of fault-section location using a 1-D convolutional neural network (1-D CNN) and waveform concatenation. After SLG fault occurs, DFI measures the transient zero-sequence currents at double-ends of the line section, which could be concatenated to construct characteristic waveform. The features of characteristic waveforms would be extracted adaptively by 1-D CNN to locate the fault section. Furthermore, the problem where the on-site recorded data are hard to collect would be solved because 1-D CNN only needs a small number of samples for training in practical applications. The experimental results verified that the proposed method could work effectively under various fault conditions, even if a few DFIs are out of order. [ABSTRACT FROM AUTHOR]

Due to the difficulty in locating high-resistance grounding faults, this paper proposes a novel fault location method for HVdc transmission lines by considering double-end unsynchronized using Hilbert–Huang transform and one-dimensional convolutional neural network (1D-CNN). After the fault signal is collected at both ends, the proposed method can achieve high-precision fault location, requiring only the two ends data transmission without time synchronization. After Empirical Mode Decomposition (EMD), the high-frequency components of the double-terminal fault signals are connected in series to make a characteristic waveform. This waveform contains characteristics of different fault types and distances, which can be learned by CNN. The trained CNN can then be used to achieve fault location effectively. As a comparison, two fault location methods based on traditional traveling wave and machine learning are introduced. Electromagnetic transient simulation software PSCAD/EMTDC has been used to carry out various types of fault simulation on the ± 500 kV HVdc transmission system. The results show that the proposed method can reliably and accurately locate line faults under fault resistance up to 5200 Ω. [ABSTRACT FROM AUTHOR]