Search

Reported here is a high-efficiency preparation method of amorphous nickel phosphide (Ni-P) nanoparticles by intense femtosecond laser irradiation of nickel sulfate and sodium hypophosphite aqueous solution. The underlying mechanism of the laser-assisted preparation was discussed in terms of the breaking of chemical bond in reactants via highly intense electric field discharge generated by the intense femtosecond laser. The morphology and size of the nanoparticles can be tuned by varying the reaction parameters such as ion concentration, ion molar ratio, laser power, and irradiation time. X-ray diffraction and transmission electron microscopy results demonstrated that the nanoparticles were amorphous. Finally, the thermogravimetric-differential thermal analysis experiment verified that the as-synthesized noncrystalline Ni-P nanoparticles had an excellent catalytic capability toward thermal decomposition of ammonium perchlorate. This strategy of laser-mediated electrical discharge under such an extremely intense field may create new opportunities for the decomposition of molecules or chemical bonds that could further facilitate the recombination of new atoms or chemical groups, thus bringing about new possibilities for chemical reaction initiation and nanomaterial synthesis that may not be realized under normal conditions. [ABSTRACT FROM AUTHOR]

We report here a facile approach for flexible integration of high efficiency surface enhanced Raman scattering (SERS) monitors in a continuous microfluidic channel. In our work, femtosecond laser direct writing was adopted for highly localizable and controllable fabrication of the SERS monitor through a multi-photon absorption (MPA) induced photoreduction of silver salt solution. The silver substrate could be shaped into designed patterns, and could be precisely located at the desired position of the microchannel bed, giving the feasibility for real-time detection during reactions. SEM and TEM images show that the silver substrates were composed of crystallized silver nanoplates with an average thickness of 50 nm. AFM results reveal that the substrates were about 600 nm in height and the surface was very rough. As representative tests for SERS detection, p-aminothiophenol (p-ATP) and flavin adenine dinucleotide (FAD) were chosen as probing molecules for microfluidic analysis at visible light (514.5 nm) excitation, exhibiting an enhancement factor of ∼108. In addition, the combination of the SERS substrate with the microfluidic channel allows detection of inactive analytes through in situmicrofluidic reactions. [ABSTRACT FROM AUTHOR]

Compound eyes are natural multiaperture optical imaging systems and have substantial potential in the field of modern optics. However, both natural and artificial compound eyes are composed of ommatidia with fixed focal lengths, and thus incapable of variable‐focus imaging. In this study, inspired by the tunable crystalline lens of human eyes, smart stimuli‐responsive compound eyes based on the bovine serum album (BSA) protein are fabricated via femtosecond laser direct writing. Due to the swelling and shrinking effect of BSA under different pH conditions, a tunable field of view (FOV, 35°–80°) and variable focal length of ommatidia are achieved. In addition to the direct prototyping of an entire protein‐based compound eye, the ability to flexibly integrate the smart protein ommatidia with a conventional optical lens (an SU‐8 lens in this study) to form a composite compound eye is shown. The composite compound eye achieves nearly 400% of focal length tuning at a fixed FOV. It is anticipated that femtosecond laser fabrication and the integration of smart protein‐based compound eyes may emerge as an enabler for fabricating miniature tunable imaging systems. [ABSTRACT FROM AUTHOR]

Femtosecond laser machining has been widely used for fabricating arbitrary 2.5 dimensional (2.5D) structures. However, it suffers from the problems of low fabrication efficiency and high surface roughness when processing hard materials. To solve these problems, we propose a dry-etching-assisted femtosecond laser machining (DE-FsLM) approach in this paper. The fabrication efficiency could be significantly improved for the formation of complicated 2.5D structures, as the power required for the laser modification of materials is lower than that required for laser ablation. Furthermore, the surface roughness defined by the root-mean-square improved by an order of magnitude because of the flat interfaces of laser-modified regions and untreated areas as well as accurate control during the dry-etching process. As the dry-etching system is compatible with the IC fabrication process, the DE-FsLM technology shows great potential for application in the device integration processing industry. [ABSTRACT FROM AUTHOR]

Although femtosecond laser machining has been widely used for fabricating arbitrary micro/nano structures, it suffers from the problems of low fabrication efficiency and high surface roughness when processing hardmaterials. A dry‐etching‐assisted femtosecond laser machining (DE‐FsLM) approach is proposed to solve these problems. As the dry etching system is compatible with the IC fabrication process, the DE‐FsLM technology shows great potential for application in the device integration processing industry. (Picture: Prof. Hong‐Bo Sun et al., article number 1600115, in this issue) [ABSTRACT FROM AUTHOR]