Search

Abstract This paper presents the experimental verification of the tunable characteristics of a ferrite composite right/left handed coupled line coupler. The coupler is designed using two coupled CRLH-CRLH transmission lines. The coupler is designed to demonstrate equal through and backward coupling. The novel coupler has been designed and realized in coplanar waveguide configuration on a ferrite substrate. The tunable characteristics are achieved by changing the applied DC magnetic bias to the ferrite substrate. The measurement results reveal that the coupler's fractional bandwidth can be tuned from 29% to 69% by varying the applied DC magnetic bias from 1000 Oe to 1750 Oe. Within the tunable bandwidth, the maximum backward coupling is −5 dB. The coupler has high forward coupling isolation, close to −30 dB at its centre operating frequency. In addition to its tuning capability, the coupler has the advantages of its compact size; it has the length of 11.5 mm and not-so-tight line separations of 2.5 mm. Furthermore the coupler only requires low DC magnetic bias. [ABSTRACT FROM AUTHOR]

In this paper, a novel compact and tunable impedance transmission line transformer is presented for the first time. The transformer is designed using a left handed coplanar waveguide transmission line on a ferrite substrate. Based on the dispersive properties of the ferrite medium, the theoretical study of the transformer has been carried out using its equivalent circuit analysis and the composite right / left handed transmission line theory. The theoretical study was verified through full wave electromagnetic numerical simulations. The results show that the transformer matches a 25 Ω load to a 50 Ω line with tunability from 2.55 GHz to 3.2 GHz. The return loss at center frequency is better than 20 dB with insertion loss better than -1 dB. The transformer has a very compact size with dimensions of 4.25 × 21 mm, showing approximately 64% reduction in size in comparison with a conventional right-handed transformer within the same operating frequency band. Moreover, the proposed coplanar waveguide transformer configuration has smaller demagnetization factor and hence it requires smaller DC magnetic bias values compared to microstrip configuration. [ABSTRACT FROM AUTHOR]

This paper presents, for the first time, a tunable left handed coplanar waveguide zeroth-order resonator on a ferrite substrate. Analysis and design procedures of the proposed resonator are introduced. The proposed resonator is designed to be tuned over the frequency band from 3 to 4.85 GHz with lower than 3-dB insertion loss and better than 10-dB return loss. The dimensions of the proposed resonator are 8.3 x 20 mm. The advantages of the proposed resonator are its tuning capability in addition to its compact size. [ABSTRACT FROM AUTHOR]