Search

Development of a novel filter material is urgently required for replacing the high-cost flue gas purification technology in the simultaneous removal of both fine dust and Nitrogen oxides (NOx). In this study; polyphenylene sulfide (PPS) needle-punching fibrous felts (NPFF) were employed as the filter material to remove the fine dust; and in the meanwhile; Mn and Ce oxides were loaded onto the PPS NPFF as the catalyst for selective catalytic reduction of NOx with NH3. Two different pretreatment methods; i.e., sodium alginate (SA) deposition and plasma treatment; were employed to modify the PPS NPFF before the traditional impregnation and thermal treatment processes during the catalyst loading. The results showed that these two pretreatment methods both afforded the PPS NPFF with the enhanced loading rate and stability of Mn/Ce oxides compared to those without any pretreatments; which were significantly beneficial for the denitration application. Moreover; we found that both SA deposition and plasma pre-treated samples presented excellent dust-removal properties; and the filtration efficiency could reach 100% when the particle size of the fine particulates was above 4 μm. This study demonstrated that our Mn/Ce oxides decorated PPS NPFF have great potential to be applied in the fuel gas purification field; due to their stable structure; handling convenience; and excellent filtration efficiency; as well as high denitration performance. [ABSTRACT FROM AUTHOR]

In this paper, a novel electrostatic-assisted melt blown process was reported to produce polypropylene (PP) microfibers with a diameter as fine as 600 nm. The morphology, web structure, pore size distribution, filtration efficiency, and the stress and strain behavior of the PP nonwoven fabric thus prepared were characterized. By introducing an electrostatic field into the conventional melt-blown apparatus, the average diameter of the melt-blown fibers was reduced from 1.69 to 0.96 μm with the experimental setup, and the distribution of fiber diameters was narrower, which resulted in a filter medium with smaller average pore size and improved filtration efficiency. The polymer microfibers prepared by this electrostatic-assisted melt blown method may be adapted in a continuous melt blown process for the production of filtration media used in air filters, dust masks, and so on. [ABSTRACT FROM AUTHOR]