Search

This paper demonstrates a signal analysis system-on-chip (SoC) consisting of a general-purpose RISC-V core with vector extensions and a fixed-function signal-processing accelerator. Both the application core and the accelerators are design instances produced through an agile design-space exploration process by generators that allow for a wide range of parameter configurations. The signal processing chain consists of generated instances of a time-interleaved analog-to-digital converter (ADC) followed by a digital tuner, a finite-impulse response (FIR) filter, a polyphase filter, and a fast Fourier transform (FFT) all connected to the five-stage, in-order RISC-V Rocket processor via an AXI4 bus. The generator-based design methodology is detailed, along with the agile design process of producing the fabricated design instance. The $5\,\,\text {mm}\times 5\,\,\text {mm}$ chip is implemented in a 16-nm FinFET process and operates at 410 MHz at 750 mV drawing 600 mW. Presented applications show coupled functionality of the application processor and accelerator performing spectrometry and radar receive processing, and a comparison with other state-of-the-art application-specific integrated circuits (ASICs) proves that generators can produce performance-competitive designs. [ABSTRACT FROM AUTHOR]

A 40–56 Gb/s PAM-4 receiver with ten-tap decision-feedback equalization (DFE) targeting chip-to-module and board-to-board cable interconnects is designed in 16-nm FinFET. The design implements direct feedback of the first post-cursor (h1) DFE tap to reduce the number of slicers. The h1 feedback signals are directly tapped from the master latch output of the StrongArm-based slicers. A CMOS amplifier with delayed pre-charge release is used to boost and pre-condition the h1 feedback signals before being applied to current-mode logic tap cell for optimum DFE summer settling time. The receiver achieves less than 1E-12 PRBS31 bit error rate (BER) over a channel with 10-dB loss at 14-GHz consuming 230 mW. Fully adapted by off-chip software, the receiver performance demonstrates the effectiveness of direct h1 loop and the need for higher DFE taps to achieve a required BER over channels with reflections. Receiver performance over higher loss channels up to 23 dB and/or under emulated cross-talk noise injection cases are also presented. [ABSTRACT FROM AUTHOR]