Search

This paper presents a dual-core two-parameter optical fiber sensor based on the surface plasmonic resonance (SPR) effect. It is analyzed by the finite element method. The proposed sensor is a dual-channel structure designed with photonic crystal fiber (PCF) as the base material: one channel is coated with a gold film to measure the refractive index (RI) of the solution to be measured, and the other channel is coated with a gold film and polydimethylsiloxane to measure the temperature of the solution to be measured. The exposed microslot structure on both sides reduces the complexity of sensing measurements. The results show that the maximum RI sensitivity of the sensor is 19,900 nm/RIU, and the maximum sensitivity to temperature is 8.7 nm/℃. This work is conducive to realizing a PCF sensor with high sensitivity, large measurement range, real-time monitoring, and easy preparation. As a result, the sensor is expected to be widely used in fields such as biology and chemicals. [ABSTRACT FROM AUTHOR]

Surface plasmon resonance (SPR) sensing methods enable highly sensitive, fast response, and label-free analysis of biomolecular interactions. For SPR sensors, sensitivity and full width at half maximum (FWHM) are two incompatible performance parameters. We propose a refractive index (RI) sensor using a dual-core photonic crystal fiber (PCF) and SPR effects to achieve high sensitivity and a narrow FWHM simultaneously. The air holes of the sensor appear in a hexagonal arrangement, and polishing technology introduces two polishing planes into the cladding. A gold film is deposited on one side of the polished plane to form a highly sensitive RI sensing channel. Five gold nanowires are deposited on the other side of the polished plane to form a RI sensing channel with a narrow FWHM. We analyzed and optimized its structural parameters using the finite element method and determined the optimal structural parameters. The numerical results demonstrate that the maximum sensitivity of the sensor is 21,000 nm/RIU with the narrowest FWHM of 31 nm. Therefore, measuring the refractive index simultaneously with two sensing channels increases the detection accuracy of the measurement. In addition, the findings further indicate that variations in structural parameters do not significantly impact the sensing performance of the sensor, which makes the production of the sensor relatively simple. In conclusion, our work provides a new research method for realizing high sensitivity and a narrow FWHM simultaneously. [ABSTRACT FROM AUTHOR]

A D-shaped photonic crystal fiber (PCF) surface plasmon resonance (SPR) sensor is proposed to measure the refractive index in visible and near-infrared regions. Compared with traditional PCF, the use of D-shaped PCF can avoid filling materials and coatings in the hole. The plasma material of sensors is silver, and graphene is coated on the surface of the silver film. Graphene layer can not only prevent the oxidation of the silver but also improve the performance of the sensor. Then the influence of structural parameters on the sensor performance is studied by the finite element method (FEM). Results show that the performance of the sensor is not sensitive to the structural parameters, which makes the sensor has a good manufacturing tolerance. Moreover, when the refractive index (RI) of the analyte is 1.33 ~ 1.41, the maximum wavelength sensitivity is 13,750 nm/RIU, and the corresponding RI resolution is 7.27 × 10−6 RIU−1. In addition, the maximum figure of merit is 201 RIU−1. The proposed sensor is advanced with high sensitivity, simple structure and big fabrication tolerance, which could become a competitive candidate for water pollution monitoring, medical diagnosis, biochemical analysis, and detection fields. [ABSTRACT FROM AUTHOR]

In this paper, we propose a broadband mode converter based on photonic crystal fiber (PCF) starting from the method of propagation constant height fitting. Using the finite element method and the beam propagation method, three typical mode converters in the S + C + L range, LP01 to LP11, LP01 to LP21, and LP01 to LP31, are calculated. Numerical results show that the mode coupling efficiency of this mode converter is over 90% and the mode extinction ratio is over 10 dB. This converter can realize pattern multiplexing in a cascade manner. On this basis, we propose a multi-core mode multiplexer structure. On the premise of sacrificing some performance, three modes can be reused at the same time. Mode converters of PCF structure can be fabricated by PCF post-processing technology. It is expected to become an important part of the future mode division multiplexing (MDM) optical communication system. [ABSTRACT FROM AUTHOR]

A high sensitivity plasmonic temperature sensor based on a side-polished photonic crystal fiber is proposed in this work. In order to achieve high sensitivity and high stability, the gold layer is coated on the side-polished photonic crystal fiber to support surface plasmon resonance. The mixture of ethanol and chloroform is used as the thermosensitive liquid. The performances of the proposed temperature sensor were investigated by the finite element method (FEM). Simulation results indicate that the sensitivity of the temperature sensor is as high as 7.82 nm/°C. It has good linearity (R 2 = 0.99803), the resolution of 1.1 Ă— 10âˆ'3 °C, and the amplitude sensitivity of 0.1008 °Câˆ'1. In addition, the sizes of the small air hole and polishing depth have little influence on the sensitivity. Therefore, the proposed sensor shows a high structure tolerance. The excellent performance and high structure tolerance of the sensor make it an appropriate choice for temperature measurement. [ABSTRACT FROM AUTHOR]

Highlight • A high-sensitivity PCF sensor was designed for analyte detection. • This optimized sensor had an excellent linearity and good sensitivity. • The sensitivity within the refractive index range of 1.425–1.45 is 60,611 nm/RIU. • The corresponding minimum detection limit is 1.58 × 10−6 RIU. • The sensitivity within the refractive index range of 1.45–1.46 is 28,000 nm/RIU. • The corresponding minimum detection limit is 2.86 × 10−6 RIU. Abstract A high-sensitivity photonic crystal fiber (PCF) refractive index sensor based on the resonant coupling of core mode and defect mode is studied by the finite element method. The large liquid-filled is placed near to the core for easy coupling with the core mode. The simulation results show that when the refractive index of the analyte is 1.425–1.45 and 1.45–1.46, the average sensitivity is 60,611 and 28,000 nm/RIU respectively, and the corresponding minimum detection limits are 1.58 × 10−6 and 2.86 × 10−6 RIU. [ABSTRACT FROM AUTHOR]

We propose a modified design for a photonic crystal fiber (PCF) polarization filter based on surface plasmon resonance (SPR). The air holes are arrayed in diamond lattices, and the diameter of the holes around the gold-coated holes are different that can separate the refractive index of the x-polarization and y-polarization second order surface plasmon polariton (SPP) modes. The influences of structural parameters of the photonic crystal fiber (PCF) on the filter characteristics are studied using the finite element method (FEM). Great changes have taken place in the results of numerical simulation by changing the thickness of the gold film and air hole diameter. Simulation results show that the resonance wavelength is communication wavelength 1550 mm, the loss of the y-polarization mode is 43,126.7 dB/m. When the length of the fiber is 500 μm, extinction ratio is more than 20 dB at the communication wavelength, and bandwidth achieve to 190 nm. It is an important property of PCF polarization filter in production. [ABSTRACT FROM AUTHOR]

A broad bandwidth polarization filter based on photonic crystal fiber (PCF) coated with gold layer is proposed and simulated by the full vector finite element method. The surface plasmon resonance coupling theory is studied, and the factors that affect the polarization filtering effect are analyzed. By changing the structural parameters of the PCF, we realize polarization filter at 1.55 and 1.48 μm. In the designed polarization filter, the maximum loss of the unwanted y-polarization at 1.55 μm is 803.56 dB/cm and at 1.48 μm is 732.69 dB/cm. Besides, a broad bandwidth of 1000 nm with the crosstalk better than 20 dB is obtained. The suggested PCF is competitive for polarization device. [ABSTRACT FROM AUTHOR]

We design a crystal photonic fiber (PCF) polarization filter with asymmetric structure and two large air-holes coated with gold film. The influence of the thickness of metal layers and the diameter of large air-holes on the filtering characteristic is investigated using finite element method (FEM). In calculations, the sixth and the third order surface plasma modes (SPM) are presented. The resonance positions are well separated by the asymmetry of the structure in vertical direction. The loss of unwanted polarization is 829 and 1267 times than that of wanted polarization at 1.48 and 1.55 μm respectively. When the fiber length is 3 mm, the crosstalk is 1055 dB and 927 dB for 1.48 and 1.55 μm. The bandwidth with crosstalk better than 20 dB can reach to 1000 nm, covering almost all communication band. What’s more, gold excitation of SPR and silver excitation of SPR are compared and studied. [ABSTRACT FROM AUTHOR]

We propose a modified design for a Core shift photonic crystal fiber (PCF) polarization filter based on surface plasmon resonance. The Core shiftting is achieved by the air holes with different diameters around the gold-coated holes, which can separate the refractive index of the x-polarization and y-polarization second order surface plasmon polariton modes. The influences of structural parameters of the PCF on the filter characteristics are studied using the finite element method. Simulation results great changes have taken place in the results of numerical simulation by changing the thickness of the gold film and air hole diameter. We obtain a resonance wavelength with 1550 nm. The y-polarization mode is supressed significantly with the loss of 58,456.7 dB/m. With the length of the fiber is 300 μm, a extinction ratio is higher than 20 dB and a bandwidth achieve to 450 nm at the communication wavelength can be got. All these properties we achieved in the core shift PCF are important properties of PCF in broadband polarization filter in application. Our design can offer some guidance to the production of the polarization filter. [ABSTRACT FROM AUTHOR]

A kind of polarized filtering photonic crystal fiber (PCF) with nanoscale gold film is studied by using the finite element method. The cross-section structure of the PCF is composed of a hexagonal lattice of air holes in which an air hole is gold coated, and the air-hole layout is modified. By our structure, the loss of x-polarized mode is further larger than the loss of y-polarized mode and the loss peak appears at the wavelength 1.31 μm. The corresponding loss in x-polarized can reach a value of 85,780 dB/m at the resonance wavelength. It can be used for the communication windows of 1.31 μm which can be used for carrying data/voice. When the length of fiber is longer than 30 μm, the extinction ratio is better than 20 dB at the wavelength 1.31 μm. When the length of fiber is longer than 210 μm, the extinction ratio is better than 20 dB with the wavelength ranging from 1.26 to 2 μm. The broadband polarized filtering PCF covering 740 nm is achieved. [ABSTRACT FROM AUTHOR]

A polarization splitter based on dual-core photonic crystal fiber filled with tellurite glass in the central hole is proposed. The characteristics are studied by finite element method. The influences of the parameters $$d_{1}, d_{2}, \varLambda$$ on the coupling length and coupling length ratio (CLR) are analyzed. The curves of coupling lengths of X-polarization, Y-polarization light dependence on the operable wavelength $$\lambda$$ are flat under the optimized structural parameters which is helpful to realize broadband polarization splitter. The simulation results indicate that the CLR could reach to 2.006 at the wavelength of $$1.55\,\upmu {\hbox {m}}$$ . The fiber length is only 510 $$\upmu {\hbox {m}}$$ and the bandwidth of extinction ratio greater than 20 dB is 284 nm, i.e., from 1461 to 1745 nm which could be widely used in the large-capacity, broad-bandwidth and integrated optical communication systems. As the fiber length decreases, we find the bandwidth increases. But the extinction ratio at 1.55 $$\upmu {\hbox {m}}$$ is lower than 20 dB as the fiber length is less than 510 $$\upmu {\hbox {m}}$$ . [ABSTRACT FROM AUTHOR]

We design two kinds of plasmonic broadband polarization splitters based on dual-core photonic crystal fiber (DC-PCF) with elliptical Au or Ag nanowire in this paper. It is analyzed for the polarization independent characterestics of the designed DC-PCF by the finite element method (FEM). In order to excite the surface plasmon resonance (SPR), the metal Au and Ag are filled into elliptical central air hole. The resonance coupling between the fourth- or fifth-order surface plasmon modes (SPMs) and core-guided modes (CGMs) are founded by this numerical simulation. The device lengths of the designed splitters with Au nanowire are 2937 and 827 μm at the wavelength of 1.31 and 1.55 μm, respectively. As the extinction ratios are better than −20 dB, its bandwidths are better than 94 and 103 nm. For the designed Ag nanowire splitter, the device lengths are 3066 or 809 μm at 1.31 or 1.55 μm, respectively. The bandwidths with the extinction ratio better than −20 dB are 66 and 104 nm, respectively. [ABSTRACT FROM AUTHOR]

A single-polarization photonic crystal fiber (PCF) based on surface plasmon resonance (SPR) is proposed. Finite element method is employed in simulating the PCF with gold-coated. The resonance wavelength can be modulated by changing the thickness of gold layer. At the resonance wavelength 1.55 μm, the loss of y-polarized mode is much larger than the loss of x-polarized mode. When the fiber length is set to 2 mm, the value of extinction ratio reaches to −118.7 dB, the y-polarized mode is suppressed and only x-polarized mode can be guided. The fiber is applicable in the production of single-polarization filter. The PCF has a simple structure and a big error tolerance, it has a good practicability. [ABSTRACT FROM AUTHOR]

A polarization filter at the two communication windows of 1.31 and 1.55 μm based on photonic crystal fiber (PCF) coated by nanoscale gold film is proposed. The effects of geometrical parameters of the PCF on the performances of polarization filter are evaluated by finite element method (FEM). Numerical simulations reveal that the polarization filter possesses ultra-short length of 400 μm and high extinction ratios of 41 and −150 dB at the communication wavelengths of 1.31 and 1.55 μm respectively. The bandwidth of extinction ratio (ER) better than 20 dB is 58 nm at the communication window of 1.31 μm. Moreover, the bandwidth of ER better than −20 dB is 164 nm at the communication window of 1.55 μm. [ABSTRACT FROM AUTHOR]

A broadband single-polarization photonic crystal fiber polarized filter based on surface plasmon resonance is proposed based on finite element method. Numerical simulations show the confinement loss of y-PCM (y-polarized core mode) is much higher than that of x-PCM (x-polarized core mode) in the wavelength range 1.20-1.63 μm. The confinement loss of y-polarized mode is 45,240 and 10,200 dB/m at the communication wavelength 1.31 and 1.55 um, respectively, and the corresponding loss of x-polarized mode is just 90 and 80 dB/m. When the fiber length is 3 mm, the bandwidth of extinction ratio better than -20 dB is greater than 430 nm covering almost all the communication wavelength. To our best knowledge, the bandwidth is the widest. The impacts of structural parameters on the resonance characteristics are also discussed. The structure could be further optimized for better result. [ABSTRACT FROM AUTHOR]

A circular ultra-short A s 2 S 3 filled double-core photonic crystal fiber polarization beam splitter is proposed. The finite element method is used to study the performance of the designed photonic crystal fiber polarization beam splitter. By filling high refractive index A s 2 S 3 into the central air hole, the coupling performance of the double-core PCF is improved. By optimizing geometric parameters, the splitting length of the circular beam splitter can be as short as 72.43 μ m, and the extinction ratio can reach −151.42 dB. The high extinction ratio makes the circular polarization beam splitter have a good beam splitting function. The designed circular double-core photonic crystal fiber has the same cladding pore diameter, which is easier to prepare than other photonic crystal fibers with complex pore structure. Due to the advantages of high extinction ratio, extremely short beam splitting function and simple structure, the designed polarization beam splitter will be widely used in all-optical networks and optical device preparation. [ABSTRACT FROM AUTHOR]

This paper proposes a highly sensitive surface plasmon resonance (SPR) refractive index sensor based on the photonic crystal fiber (PCF). The optical properties of the PCF are investigated by modulating the refractive index of a liquid analyte. The finite element method (FEM) is used to calculate and analyze the PCF structure. After optimization, the fiber can achieve high linearity of 0.9931 and an average refractive index sensitivity of up to 14,771.4 nm/RIU over a refractive index range from 1.47 to 1.52, with the maximum wavelength sensitivity of 18,000.5 nm/RIU. The proposed structure can be used in various sensing applications, including biological monitoring, environmental monitoring, and chemical production with the modification and analysis of the proposed structure. [ABSTRACT FROM AUTHOR]

This paper proposes a Photonic Crystal Fiber (PCF) refractive index sensor model based on the surface plasmon resonance effect. The proposed PCF model also uses the full vector finite element method to transfer the structure under the anisotropic Perfect Matching Layer (PML) boundary condition. Numerical calculations were carried out on the sensor characteristics. The calculation results show that the elliptical air hole on the left side of the PCF core is coated with a gold-nano film which serves as a Surface Plasmon Resonance (SPR) sensing channel to detect the refractive index of liquid materials. Compared with other structures, the resonant peak generated by the excited SPR effect from the elliptical sensing channel has a high sensitivity to the change of the refractive index of the liquid to be measured. With the help of this attribute, it is relatively easy to adjust the sensitivity. The refractive index range of this structure is within 1.43–1.49 and the sensitivity is up to 12,719.97 nm·RIU−1. The linearity is good; R2 = 0.99927, which is very suitable for liquid sensing. [ABSTRACT FROM AUTHOR]

A photonic crystal fiber (PCF) with nanoscale gold-coated and liquid-filled air-holes is proposed, which can realize anomalous single-polarization transmission. That is, the polarization filtering in the x- and y- polarization directions is achieved at wavelengths of 1.18 and 1.55 μm. The dispersion characteristics and losses of filter are analyzed by the finite element method (FEM). The results show that when the fiber length is 800 μm, the extinction ratios (ERs) at the above two wavelengths are 31.25 and -248.63 dB, and the corresponding bandwidths are 28 and 270 nm, from 1.165 to 1.193 μm and 1.43–1.70 μm, respectively. Furthermore, by changing the structural parameters, not only can the positions of resonance wavelengths in the two orthogonal polarization directions be changed simultaneously, but also the positions of resonance wavelengths in the x polarization direction can be changed singly, which is conducive to the filtering of PCF at a specific wavelength within a certain range. [ABSTRACT FROM AUTHOR]

In this paper we propose a gold-plated photonic crystal fiber (PCF) refractive index sensor based on surface plasmon resonance (SPR), in which gold is coated on the external surface of PCF for easy fabrication and practical detection. The finite element method (FEM) is used for the performance analysis, and the numerical results show that the thickness of the gold film, the refractive index of the analyte, the radius of the air hole in the first layer, the second layer, and the central air hole can affect the sensing properties of the sensor. By optimizing the sensor structure, the maximum wavelength sensitivity can reach 11000 nm/RIU and the maximum amplitude sensitivity can reach 641 RIU−1. Due to its high sensitivity, the proposed sensor can be used for practical biological and chemical sensing. [ABSTRACT FROM AUTHOR]

Abstract We propose and investigate a temperature sensor based on Sagnac interferometer with liquid crystal (LC) photonic crystal fiber (PCF) by finite element method (FEM). LC E7 which is anisotropic under electrical field is designed to be infiltrated into the cladding air holes of PCF. The birefringent PCF is then launched into a Sagnac interferometer. The interference spectrum of the Sagnac interferometer is influenced by the thermal effect of LC E7 and thus could be used to measure the temperature. The simulation results show that the temperature measuring sensitivity and resolution reach to 15 nm/K and 6.7E−4 K in the range of 290–320 K. The measuring range and sensitivity could be modified further by optimizing the PCF structure parameters. [ABSTRACT FROM AUTHOR]

In this work, we propose an octagonal photonic crystal fiber (PCF) filter based on tellurite. Selective gold coating in air holes couples the core mode to a surface plasmon mode. The finite element method is used to analyze the structure in the mid-infrared band. The simulated results and analysis show that the losses in the y and x polarization modes at 2.55 µm are 2063.2 and 21 dB/cm, respectively. Therefore, the unwanted y-polarization mode is filtered out. The higher loss ratio optimizes the formant position and intensity of surface plasmon mode and core mode. When the fiber length of the filter is optimized to 500 µm, the extinction ratio of − 102 dB is achieved at 2.55 µm. Consequently, the single polarization transmission with a 500 nm width is realized. When the length of the fiber is greater than 500 µm, it realizes the 1500 nm (2.2–3.7 µm) ultra-wideband filtering. We also analyze the manufacturing feasibility of the proposed PCF and the influence of structural parameters on the limiting loss characteristics. • Introduce a new type of substrate material: TZLB, which breaks the limitation of conventional quartz glass. • The loss of the y-polarization state is much higher than the x-direction. • When the fiber length is 500 µm, the ER reaches −102 dB and the effective filtering range is 2.4‐2.9 μm. • When the fiber length is greater than 500 µm, it achieves the 1500 nm ultra-wideband filtering. [ABSTRACT FROM AUTHOR]

A dual-polarized microstructure fiber sensor is based on surface plasmon resonance, which is arranged of pentagonal lattice to achieve refractive index sensing in the near-infrared spectrum. The gold nanowire-filled fiber sensor exhibits excellent sensing characteristics and improved transmission properties. Finite element method is used for computational analysis and structural optimization for the fiber sensor. When the refractive index of the analyte range from 1.32 to 1.38, dual-polarizd sensing can be implemented as a self-calibration with wavelengths increasing from 700 to 1200 nm. For the proposed sensor, the highest wavelength sensitivity of 10,286 nm/RIU is exhibited with a sensor resolution of 9.72×10−6 RIU, and the corresponding amplitude sensitivity and figure of merit are as high as 544.0 RIU−1 and 146.9. Moreover, the sensing length of at least 1.14 mm ensures accurate detection of optical signals for proposed sensor. Owing to the above advantages, the proposed sensor is suitable for high integration and high precision sensitivity detection. [ABSTRACT FROM AUTHOR]

Highlights • The PCF is simple, novel and easy to apply. • The filter can simultaneously achieve polarization filtering effects on the input signals of the 1310 and 1550 nm communication bands. • When the length of the PCF is 0.8 mm, the crosstalk is less than −20 dB or better than 20 dB in the 1550 and 1310 nm bands, the optical bandwidth can reach 220 and 150 nm, respectively. Abstract A photonic crystal fiber (PCF) polarization filter with dual communication bands is proposed in this paper. The polarization characteristics of the double-hole gold-coated PCF are numerically analyzed by utilizing the finite element method (FEM). As we know, the filter can achieve polarization filtering effect on input signals at 1310 nm (y-polarized mode) and 1550 nm (x-polarized mode) bands simultaneously in two orthogonal polarization states. In the above two communication bands, the confinement losses of the unwanted polarization mode can reach 192.7 dB/cm (y-polarized mode) and 427.5 dB/cm (x-polarized mode), whereas other polarization mode losses are very low. Furthermore, when the transmission length of the PCF is 800 μm, x and y polarization mode crosstalk can reach −275.4 and 126.9 dB in the 1550 and 1310 nm bands, respectively. Meanwhile, the crosstalk is less than −20 dB or better than 20 dB, the optical bandwidth can reach 220 and 150 nm, respectively. [ABSTRACT FROM AUTHOR]

Abstract A magnetic field sensor based on magnetic fluids (MFs) selectively infilling photonic crystal fiber (PCF) is designed and analyzed by the finite-element method (FEM). The PCF consists of three-layer air holes in the cladding which are arranged in regular hexagonal lattice. The left and right sides of the fiber core are made up of two larger circular air holes while the upper and below sides are made up of four smaller circular air holes which are benefit to enhance the birefringent effect. MFs are injected into one air hole in the second cladding layer which generates a defect core with high confinement loss. Air holes around the defect core are asymmetrically distributed which can enhance the birefringence of the transmission mode in defect core. When the phase matching condition between core modes and defect core modes is satisfied, the light transmitting in the core couples to the defect core and a sharp decrease of light transmitting energy occurs. The refractive index of defect core modes is modulated by magnetic field strength. The peak wavelengths of confinement loss spectra depicts pretty well linear relationship with magnetic field strength in the detected range of 30–130 Oe. The magnetic field measuring sensitivity reaches to 584 pm/Oe for x-polarized mode and 700 pm/Oe for y-polarized mode, respectively. [ABSTRACT FROM AUTHOR]

Abstract: A kind of sandwich structure photonic crystal fiber with diameter-increasing air holes is proposed. The sandwich structure is composed of the rectangular lattice in the center and triangular lattice in both sides, which is used to gain high birefringence. The air holes in the cladding, whose diameter in outer ring is always larger than the next inner ring, is used to reduce the confinement loss. The model field, dispersion, birefringence and confinement loss of the fiber fundamental mode are simulated by full-vector finite element method. It was shown from numerical results that it is possible to design a PCF with birefringence B =3.8×10−3 and the fast axis confinement loss less than 10−3 dB/km at wavelength of 1550nm. [Copyright &y& Elsevier]

In this paper, a dual-polarizated photonic crystal fiber filter (PCF) based on surface plasmon resonance (SPR) was proposed. Its polarization characteristics were numerically researched by finite element method (FEM). The results indicate that the polarization filtering of the filter be able to fulfill in dual communication bands of 1310 and 1550 nm. The confinement loss reaches 80,711.4 dB/m for the x polarization core mode at the wavelength of 1310 nm, while 46,614.5 dB/m for the y polarization core mode at the wavelength of 1550 nm. When the length of PCF is 2.5 mm, the extinction ratios of x and y polarization core modes can achieve 1705.27 and − 883.46 dB, respectively. For the communication windows of 1310 and 1550 nm, the filtering bandwidths can reach to 390 and 350 nm, respectively. These excellent characteristics are beneficial to the design and manufacture of filter devices. • A PCF dual windows polarization filter based on SPR is proposed. The square arrangement of air holes is easy to prepare. • The losses of the filter at dual windows can reach 80,711.4 dB/m and 46,614.5 dB/m. • When L PCF = 2.5 mm, the ER of the two orthogonal modes can reach 1705.27 and − 883.46 dB. The bandwidth can reach 390 nm and 350 nm. [ABSTRACT FROM AUTHOR]

In this paper, an asymmetric photonic crystal fiber (PCF) polarization filter near the gold-clad hole based on surface plasmon resonance (SPR) is proposed. The outer walls of the two air holes in the y-direction are coated with a gold film, and the two kinds of cladding air holes are introduced near the coated holes to increase the difference in the coupling strength of x and y polarization modes and SPP modes, thus separating the two polarization states. The finite element method is used to study the characteristics of the polarization filter, and the result shows that the polarization loss in the y-direction is as high as 1565.98 dB/cm at 1. 55 μ m , while the loss in the x-direction is relatively small. When the fiber length is 1 mm, the crosstalk peak reaches 1322.7 dB. From 1 μ m to 2 μ m (range: 1000 nm), the crosstalk is always greater than 20 dB. If four kinds of pores with different sizes are used in the cladding layer, the symmetry around the gold-coated holes will be destroyed, and a better filtering effect can be obtained. The excellent performance of the proposed polarization filter makes it a good candidate material for broadband polarization filters. • Propose a new idea for filter design: improve the asymmetry near the gold-clad hole. • The loss peak in y-polarization is much higher than in x-polarization at communication wavelength 1.55 μ m. • When the fiber length is 1 mm, the crosstalk peak reaches 1322.7 dB. From 1 μ m to 2 μ m, the crosstalk is always greater than 20 dB. • The higher the asymmetry near the gold-plated hole, the better the polarization filtering performance. [ABSTRACT FROM AUTHOR]

• A novel SPR sensor based on D-shaped PCF with offset-core is proposed and demonstrated for the liquid RI measurement. • The structural design of the D-shaped fiber makes the placement of the liquid to be tested more convenient. • The SPR sensor with high sensitivity can be realized by introducing the offset-core. • Ultra-high wavelength sensitivity and amplitude sensitivity of 42,000 nm/RIU and 2204.49 RIU−1 are obtained. We propose a novel D-shaped offset-core photonic crystal fiber (PCF) sensor based on surface plasmon resonance (SPR) for the liquid refractive index (RI) measurement. The D-shaped structural design makes the placement of the liquid to be tested more convenient. The offset-core is designed to improve the sensitivity of the SPR sensor. The optical propagation characteristics of the proposed sensor were investigated by the finite element method (FEM). Numerical results show that more energy of the core mode transfers to the gold surface as the analyte RI increases. The wavelength sensitivity increases with the increase of RI, and the maximum wavelength sensitivity can reach to 42,000 nm/RIU. What's more, the maximum amplitude sensitivity is up to 2204.49 RIU−1. The proposed sensor shows excellent performances in terms of wavelength sensitivity and amplitude sensitivity than some previous reported sensors. We believe that it can become a favorable competitor in the liquid RI measurement fields. [ABSTRACT FROM AUTHOR]

• A liquid-filled temperature sensor based on Sagnac interferometer is proposed. • Light transmissions based on three liquid-filled methods were investigated. • The wavelength when φ/2π is integer corresponds to interference dip wavelength. • High sensitivity and good linearity can be obtained by the sensor. • The proposed liquid-filled methods are easier to be realized than some similar works. A temperature sensor based on Sagnac interferometer (SI) using photonic crystal fiber (PCF) with circular layout is proposed. Temperature measurement can be realized by filling the temperature sensitive liquid with high thermo-optic coefficient into the air holes. Considering the convenience of the experimental operation, three easy-to-operate liquid filling methods (FMs) were used to investigate the optical transmission characteristics of this sensor by the finite element method (FEM), the results show that two of which exhibit respective detection advantages in different aspects. One of the feasible methods is that all air holes are filled with temperature sensitive liquid. A single sensing interference dip with high detection sensitivity can be achieved, its average sensitivity reaches to 18.27 nm/°C. Another method is that only the large size air holes are filled with the temperature sensitive liquid. Two sensing interference dips with good linearity can be realized simultaneously. The linearity R2 are up to 0.99947 and 0.99877, corresponding average sensitivities are 9.47 and 8.57 nm/°C, respectively. Besides, these two proposed FMs are easier to be completed than FMs of some reported works. The proposed PCF temperature sensor with excellent detection performances, simple FMs and structural design has great application prospects to detect environmental temperature. [ABSTRACT FROM AUTHOR]

• The polarization filter we designed is novel and have a high performance. • The loss peak in Y-polarization is much higher than in X-polarization. • Air-holes except the innermost layer also influence the loss peak well. • The PCF filter can be widely used in system integration. In this study, a novel photonic crystal fiber (PCF) polarization filter has been designed. To resonate the surface plasma mode with the core mode, gold is selectively filled in the air holes. Using numerical simulations based on the finite element method, the influence of structural parameters on the filter is analyzed, and a set of rules for designing the PCF polarization filter is determined. The numerical simulation shows that the peak loss in the y-polarization direction at 1.31 μm reaches 1209.57 dB/cm, whereas the peak loss in the x-polarization is close to zero. Working at 1310 nm in the communication band, a new type of PCF is designed using these characteristics. [ABSTRACT FROM AUTHOR]

• A single-polarization filter comprising a gold-infiltrated and liquid crystal-filled PCF-SPR is studied by the FEM. • Compared with the traditional structures, we find that our structure has higher birefringence. • The confinement losses of x-polarized mode are 99.87, 726.50, 474.60dB/cm at wavelengths of 0.88, 1.02, 1.30um. • While the confinement losses of y-polarized mode are only 0.001, 0.004 and 0.046dB/cm. • When the transmission length of PCF is 2mm, the bandwidth of ER less than −20dB is as high as 900nm, from 0.85 to 1.75um. A broadband and single-polarization filter based on high birefringence photonic crystal fiber (HB-PCF) with selectively infiltrated gold wires and liquid crystal is proposed, and its filtering characteristics are studied by the full-vector finite element method (FV-FEM). Two gold wires are selectively filled on both sides of the liquid crystal core to act as two defect cores. The results show that the confinement loss of x-polarized core mode is much larger than that of y-polarized core mode in the wavelength range of 0.85–1.75 μm. The confinement losses of x- and y-polarized core modes are 99.87 dB/cm and 0.001 dB/cm at 0.88 um, 726.50 dB/cm and 0.004 dB/cm at 1.02 um, and 474.60 dB/cm and 0.046 dB/cm at 1.30 um, respectively. The bandwidth with extinction ratio less than 20 dB is 900 nm. Moreover, compared with the traditional structures, we find that our structure has higher birefringence. High birefringence helps to separate the resonant wavelengths of x- and y-polarized core modes. Therefore, the excellent properties of the proposed filter can make it widely used in sensing systems and broadband optical communication systems. [ABSTRACT FROM AUTHOR]