Search

Dowel bars are used at transverse joints in concrete pavements to provide load transfer, reduce faulting and improve joint performance. However, a misaligned dowel may adversely affect the performance of a joint and cause distresses in the pavement. This paper presents development, calibration, validation and application of a finite element model for behaviour analysis of various types of dowel misalignment. The model permitted extension of the laboratory testing factorial, and the results were used to quantify the effects of concrete cover and embedment length. [ABSTRACT FROM AUTHOR]

An existing finite element program—ISLAB2000—was modified to allow for the analysis of horizontally restrained and unrestrained portland cement concrete (PCC) pavement slabs with partial depth cracks. To simulate a partial-depth crack, special line spring elements were added to the ISLAB2000 finite element code. Previously published relationships between spring elements stiffness and crack depth were used for formulating the element stiffness matrix of the line spring elements and to calculate stress intensity factors after solving the system of finite element equations.Several example problems of partially cracked PCC slabs subject to typical highway loadings were solved to verify this newly developed finite element model termed ISLAB2005. The impact of crack depth and base friction parameters on slabs stresses and deflections was investigated. On the basis of this analysis, ISLAB2005 was found to be a reliable tool for analysis of partially cracked pavements that are either restrained or unrestrained from horizontal movements. [ABSTRACT FROM AUTHOR]

Ultra-thin concrete overlays or ultra-thin whitetopping (UTW), are an attractive alternative to traditional practices for the rehabilitation of asphalt pavements. However, it is widely accepted that the exiting pavement should have substantial stiffness to make a UTW a rehabilitation option. This paper re-examines this hypothesis using the performance results and structural evaluation of two experimental sections in Brazil. It is shown that structural contribution of the existing pavement is important for good performance of UTW. However, it appears that the ability of the existing pavement to ensure composite action of the individual slabs in the UTW is more important than its contribution to the flexural stiffness. [ABSTRACT FROM AUTHOR]