Search

This paper presents simulations and experimental results for two types of Passive Permanent Magnet Bearings. The bearing system under investigation consists of two permanent magnet rings opposing to each other in two different configurations. The influence of parameters, such as thickness and radius of permanent magnets, in the force is presented through FEM calculations. Two setups of passive magnetic bearings have been built. Static measurements of radial and axial forces are reported and results compared with simulations. Also, dynamic tests show the behavior of the bearing and the magnitudes of force in the foothold. The results are presented to show trends in the parameters, so the conclusions are applicable for other sizes and applications. As an example, the application as a top bearing for a 12 kW vertical axis wind turbine is considered. [ABSTRACT FROM AUTHOR]

In order to develop a new magnetic bearing set for a flywheel energy storage prototype, it was designed and simulated some configurations of Permanent Magnetic Bearings (PMB) and Superconducting Magnetic Bearings (SMB). The bearings were assembled with Nd-Fe-B permanent magnets and the simulations were carried out with the Finite Element Method (FEM). The PMB was designed to reduce the load on SMB and provide radial positioning of the whole set. SMB were designed with YBCO superconductors and an assembly of permanent magnets. Several configurations of permanent magnets were simulated, trying to maximize the magnetic flux gradient in direction orthogonal to the movement and flux density in the surface of the superconductors. Early experiments have shown an increasing stiffness and levitation force with increasing field gradient and intensity. It was also a goal to reduce the stray field outside the bearing. The levitation force of the SMB using a flux shapers configuration was measured and compared with FEM simulation, showing very good agreement. The simulation of a SMB using Halbach array configuration shows that it increases the levitation force and reduces the stray field. [ABSTRACT FROM AUTHOR]