Search

For the fixed-bed reactor configuration in the sorption-enhanced steam reforming process (SERP), solid mixture of catalyst and sorbent is stationary and alternatively exposed to reaction and regeneration conditions for multi-cycles by periodically switching the feed gases for enhanced hydrogen production with in-situ CO 2 removal. A NiO/NiAl 2 O 4 catalyst was synthesized by the co-precipitation method with rising pH technique and the crystalline spinel phase of NiAl 2 O 4 was formed under the calcination temperature of 900 °C. The catalyst was characterized by X-ray powder diffraction (XRD), scanning electron microscope (SEM), thermo-gravimetric analysis (TGA), and N 2 adsorption–desorption. The non-stoichiometric thermodynamic calculation was carried out to determine the effects of temperature and in-situ CO 2 removal on the enhancement of hydrogen production by SERP from glycerol at 425–700 °C. The multi-cycles on reaction and regeneration for hydrogen production by SERP from glycerol were performed by NiO/NiAl 2 O 4 catalyst and CaO based sorbent in a fixed-bed reactor. The results showed that hydrogen production by SERP can be clearly divided into three periods, and the experimental gaseous products were compared with non-stoichiometric thermodynamic calculations. It is obvious that H 2 purity was greatly increased, and CO 2 , CO and CH 4 concentrations were reduced by in-situ CO 2 removal during the pre-breakthrough period. It is found that enhanced hydrogen production was mainly depended on in-situ CO 2 removal. The operation durations for producing high-purity hydrogen of more than 90% were decreased with the increase of the cycles. It may due to the decrease in the reactivity of CaO based sorbent after multi-cycles reaction and regeneration. [ABSTRACT FROM AUTHOR]

Catalytic steam reforming of glycerol for H2 production has been evaluated experimentally in a continuous flow fixed-bed reactor. The experiments were carried out under atmospheric pressure within a temperature range of 400–700°C. A commercial Ni-based catalyst and a dolomite sorbent were used for the steam reforming reactions and in situ CO2 removal. The product gases were measured by on-line gas analysers. The results show that H2 productivity is greatly increased with increasing temperature and the formation of methane by-product becomes negligible above 500°C. The results suggest an optimal temperature of ∼500°C for the glycerol steam reforming with in situ CO2 removal using calcined dolomite as the sorbent, at which the CO2 breakthrough time is longest and the H2 purity is highest. The shrinking core model and the 1D-diffusion model describe well the CO2 removal under the conditions of this work. [Copyright &y& Elsevier]