Search

This paper describes the synthesis of a series of Ni based Al-MCM-41 oxygen carriers with and without Ce promoter and their application in chemical looping steam reforming of glycerol. The Al-MCM-41 is derived from montmorillonite. The oxygen carriers were prepared by direct-synthesis and post-synthesis method. A variety of technologies including N 2 adsorption-desorption, X-ray diffraction (XRD), inductively coupled plasma optical emission spectroscopy (ICP-OES), H 2 temperature-programmed reduction (H 2 -TPR), and transmission electron microscopy (TEM) were conducted to characterize the fresh and used oxygen carriers. The results show the direct-synthesis oxygen carrier possesses excellent textual properties, such as high Ni loading, small particle size, large pore volume, and uniform pore size. The incorporation of Ce could effectively control particle size via strong metal support interaction, promote the homogeneous distribution of Ni, and enhance oxygen mobility capability and water gas shift reaction. And thus shorten ‘dead time’ during the fuel feed step. The CeNi/Al-MCM-41 displayed the superior activity and excellent long-term stability, which could be due to the strengthened anti-sintering and coke capability. [ABSTRACT FROM AUTHOR]

Hydrogen production from chemical looping steam reforming (CLSR) of glycerol was studied by Ni-based oxygen carrier in a fixed-bed reactor. For the fixed-bed reactor configuration, solid Ni-based oxygen carrier is stationary and alternatively exposed to reducing and oxidizing conditions by periodically switching the feed gases. The Ni-based oxygen carrier was prepared by a liquid-state co-precipitation method with rising pH technique and the characterization was performed by X-ray powder diffraction (XRD), scanning electron microscope (SEM), transmission electron microscope (TEM) and N 2 adsorption–desorption. Gaseous products and temperature variety during CLSR process by Ni-based oxygen carrier in a fixed-bed reactor were measured, and the thermodynamic equilibrium calculation was also carried out. The results showed that the Ni-based oxygen carrier synthesized has a dual function and can efficiently convert glycerol and steam to H 2 by redox reactions. The coexisting reactions of glycerol oxidization (or NiO reduction) and steam reforming occurred before the steady stage of hydrogen production in the fuel feed step, and the conversion of NiO to Ni was obtained. Alternating reduction and oxidation reactions enabled Ni-based oxygen carrier to produce H 2 with a concentration of 85% of the equilibrium value at 600 °C, and glycerol conversion was up to 99%. The increase of temperature related to the exothermic reactions by Ni-based oxygen carrier in CLSR process was observed in redox cycles. [ABSTRACT FROM AUTHOR]