Search

This paper describes the synthesis of a series of Ni based Al-MCM-41 oxygen carriers with and without Ce promoter and their application in chemical looping steam reforming of glycerol. The Al-MCM-41 is derived from montmorillonite. The oxygen carriers were prepared by direct-synthesis and post-synthesis method. A variety of technologies including N 2 adsorption-desorption, X-ray diffraction (XRD), inductively coupled plasma optical emission spectroscopy (ICP-OES), H 2 temperature-programmed reduction (H 2 -TPR), and transmission electron microscopy (TEM) were conducted to characterize the fresh and used oxygen carriers. The results show the direct-synthesis oxygen carrier possesses excellent textual properties, such as high Ni loading, small particle size, large pore volume, and uniform pore size. The incorporation of Ce could effectively control particle size via strong metal support interaction, promote the homogeneous distribution of Ni, and enhance oxygen mobility capability and water gas shift reaction. And thus shorten ‘dead time’ during the fuel feed step. The CeNi/Al-MCM-41 displayed the superior activity and excellent long-term stability, which could be due to the strengthened anti-sintering and coke capability. [ABSTRACT FROM AUTHOR]

For the fixed-bed reactor configuration in the sorption-enhanced steam reforming process (SERP), solid mixture of catalyst and sorbent is stationary and alternatively exposed to reaction and regeneration conditions for multi-cycles by periodically switching the feed gases for enhanced hydrogen production with in-situ CO 2 removal. A NiO/NiAl 2 O 4 catalyst was synthesized by the co-precipitation method with rising pH technique and the crystalline spinel phase of NiAl 2 O 4 was formed under the calcination temperature of 900 °C. The catalyst was characterized by X-ray powder diffraction (XRD), scanning electron microscope (SEM), thermo-gravimetric analysis (TGA), and N 2 adsorption–desorption. The non-stoichiometric thermodynamic calculation was carried out to determine the effects of temperature and in-situ CO 2 removal on the enhancement of hydrogen production by SERP from glycerol at 425–700 °C. The multi-cycles on reaction and regeneration for hydrogen production by SERP from glycerol were performed by NiO/NiAl 2 O 4 catalyst and CaO based sorbent in a fixed-bed reactor. The results showed that hydrogen production by SERP can be clearly divided into three periods, and the experimental gaseous products were compared with non-stoichiometric thermodynamic calculations. It is obvious that H 2 purity was greatly increased, and CO 2 , CO and CH 4 concentrations were reduced by in-situ CO 2 removal during the pre-breakthrough period. It is found that enhanced hydrogen production was mainly depended on in-situ CO 2 removal. The operation durations for producing high-purity hydrogen of more than 90% were decreased with the increase of the cycles. It may due to the decrease in the reactivity of CaO based sorbent after multi-cycles reaction and regeneration. [ABSTRACT FROM AUTHOR]

Hydrogen production from chemical looping steam reforming (CLSR) of glycerol was studied by Ni-based oxygen carrier in a fixed-bed reactor. For the fixed-bed reactor configuration, solid Ni-based oxygen carrier is stationary and alternatively exposed to reducing and oxidizing conditions by periodically switching the feed gases. The Ni-based oxygen carrier was prepared by a liquid-state co-precipitation method with rising pH technique and the characterization was performed by X-ray powder diffraction (XRD), scanning electron microscope (SEM), transmission electron microscope (TEM) and N 2 adsorption–desorption. Gaseous products and temperature variety during CLSR process by Ni-based oxygen carrier in a fixed-bed reactor were measured, and the thermodynamic equilibrium calculation was also carried out. The results showed that the Ni-based oxygen carrier synthesized has a dual function and can efficiently convert glycerol and steam to H 2 by redox reactions. The coexisting reactions of glycerol oxidization (or NiO reduction) and steam reforming occurred before the steady stage of hydrogen production in the fuel feed step, and the conversion of NiO to Ni was obtained. Alternating reduction and oxidation reactions enabled Ni-based oxygen carrier to produce H 2 with a concentration of 85% of the equilibrium value at 600 °C, and glycerol conversion was up to 99%. The increase of temperature related to the exothermic reactions by Ni-based oxygen carrier in CLSR process was observed in redox cycles. [ABSTRACT FROM AUTHOR]

Abstract: Steam reforming of the crude glycerol by-product of a biodiesel production plant has been evaluated experimentally at atmospheric pressure, with and without in situ CO2 sorption, in a continuous flow fixed-bed reactor between 400°C and 700°C. The process outputs were compared to those using pure glycerol. Thermodynamic equilibrium calculations were used to assess the effect on the steam reforming process of the main crude impurities (methanol and four fatty acid methyl esters). The crude glycerol and steam conversions and the H2 purity reached 100%, 11% and 68%, respectively at 600°C. No CH4 was found at and above 600°C. Steam reforming of crude glycerol with in situ CO2 removal is shown to be an effective means of achieving hydrogen purity above 88% in pre-CO2 breakthrough conditions. [Copyright &y& Elsevier]

Catalytic steam reforming of glycerol for H2 production has been evaluated experimentally in a continuous flow fixed-bed reactor. The experiments were carried out under atmospheric pressure within a temperature range of 400–700°C. A commercial Ni-based catalyst and a dolomite sorbent were used for the steam reforming reactions and in situ CO2 removal. The product gases were measured by on-line gas analysers. The results show that H2 productivity is greatly increased with increasing temperature and the formation of methane by-product becomes negligible above 500°C. The results suggest an optimal temperature of ∼500°C for the glycerol steam reforming with in situ CO2 removal using calcined dolomite as the sorbent, at which the CO2 breakthrough time is longest and the H2 purity is highest. The shrinking core model and the 1D-diffusion model describe well the CO2 removal under the conditions of this work. [Copyright &y& Elsevier]