Search

• The thermochemical recycling of tall oil pitch residue was assessed as an alternative treatment , currently it is used as fuel in the pulp industry. • TFluidized bed steam crackingat 775–825 °Cproduces valuable chemicals(ethylene, propylene and benzene) leading towards a circular economy. • Energy balances show that ttall oil pitch steam cracking can be self-sustained in a dual fluidized bed if the non-valuable products are combusted. Crude tall oil is a by-product obtained from the manufacture of chemical wood pulp. The residue obtained after the distillation of this product is known as tall oil pitch (TOP). This complex fraction is a highly viscous liquid that consists mainly of free fatty acids, fatty acids derivatives, rosin acids and additives. Given its complex composition, it is commonly used as fuel for heat production. In this work, steam cracking is proposed as an alternative treatment for this residue. Steam cracking can convert TOP into a valuable product gas that can be used in different applications including the production of green chemicals, moving towards a carbon circular economy. The experimental tests were performed in the Chalmers pilot scale Dual Fluidized Bed, consisting of a steam cracker and a combustor. For these experiments, the thermochemical decomposition of 150–175 kg/h TOP was performed at the steam cracker at two different temperatures (775 and 825 °C) to evaluate the influence of this parameter on the obtained products. Wood pellets were also tested as reference material for the highest temperature. The distribution of the obtained products was analysed. Results show that TOP can be regarded as a by-product instead of a residue and used as feedstock for the recovery of chemical building blocks and syngas via thermochemical recycling. Between 40 and 50 % of the carbon present in the fuel is kept in the permanent gases, while about 20 % is in aromatic hydrocarbons. Compared to biomass, the aromatics yield obtained for TOP is much higher (190 g/kg for TOP and 13 g/kg for biomass). Among the species found, benzene, toluene and xylene, represent between 62 and 72 % of the total measured aromatics. Regarding the gas fraction, the production of valuable light hydrocarbons (such as ethylene and propylene) is more pronounced in the TOP residue than in the biomass. In addition, an energy balance over the system was estimated and showed that TOP thermochemical recycling can be self-sustained in a Dual Fluidized Bed if the non-valuable products are combusted. The results obtained in this work indicate that this TOP could be an appealing option to consider as a source of biorefinery revenue leading to the circular use of waste. [ABSTRACT FROM AUTHOR]

• Fate of Pb, Cu, Zn and Sb in chemical looping gasification of ASR. • Thermodynamic calculations utilized and compared with experimental data. • Surface characteristics studied using x-ray photoelectron spectroscopy. • Cu/Zn-ferrites, Pb-silicates and Sb-oxides observed on particle surfaces. • It is found that iron plays an important role in this complex chemistry. Gasification experiments in this study were performed in a 2–4 MW indirect gasifier coupled to a semi-commercial CFB combustor at Chalmers University of Technology. Experiments were carried out during 13 days with automotive shredder residue (ASR), giving a unique opportunity to investigate the bed material under realistic conditions and with long residence times. The metal rich ash was accumulated in the bed, gaining some oxygen carrying capabilities, creating a chemical looping gasification (CLG) process. This study aims to expand the knowledge about the chemistry of zinc, copper, lead and antimony during CLG of ASR. Several experimental methods have been utilized, such as XRD, SEM-EDX and XPS along with detailed thermodynamic calculations to study chemical transformations that can occur in the system. Thermodynamic calculations showed that the reduction potential affect the phase distribution of these elements, where highly reduction conditions result in heavy metals dissolving in the slag phase. Copper and zinc ferrites, lead silicates and antimony oxides were identified at the particle surfaces in the bottom ash. The formation of an iron rich ash layer plays an important role, especially for copper and zinc speciation. The main pathways in the complex CLG system have been discussed in detail. [ABSTRACT FROM AUTHOR]