Search

The article presents testing of a miniature fluxgate sensor developed and manufactured by Texas Instruments as well as an application of the sensor in a compact magnetic field probe with USB interface and LabView based software. Several basic properties of the sensor were evaluated and compared with the datasheet specifications. Offset stability measurements have indicated some possible problems for applications that require very high DC and low-frequency precision. Jumps in offset were present for some of the devices, frequency and duty of the jumps varying between individual pieces and with respect to the supply voltage. Magnetic probe for fast and handy measurements of DC and AC (up to 30 kHz) magnetic fields (up to ±1 mT) is also presented. The probe contains 24-bit analog to digital converter, microcontroller and high-speed USB interface which allows a live view of the signal in time and spectral charts. The probe proved to be very useful for the DRV425 debugging, application development, EMC measurements and magnetic field demonstrations activities. [ABSTRACT FROM AUTHOR]

Magnetic field sensors based on anisotropic magnetoresistance (AMR) are widely used in many scientific and industrial applications. The AMR sensor sensitivity is superior to Hall probes and size and power consumption is superior to fluxgates. However, the noise properties and the temperature stability of AMR sensors are typically worse than for fluxgates. These properties define the typical applications—less precise vectorial or gradient measurements of the magnetic field within less than ±1 mT range. AMR sensors are typically calibrated for sensitivity, offset, and orthogonality errors. However, there is another important source of error—sensitivity to the magnetic field applied in the perpendicular direction to the measurement axis. This so-called cross-field error is inherent to AMR sensors and can influence the measurements significantly. Flipping (set/reset pulses) and closed-loop operation of the sensor can reduce the cross-field error. In this paper, we present a novel approach using full vectorial compensation of the measured magnetic field resulting in a complete elimination of the cross-field effect. The vectorial compensation provided superior results over alternative approaches that were also evaluated. [ABSTRACT FROM PUBLISHER]

DC/AC yokeless galvanically insulated electric current sensors are required for applications, e.g., in automotive and aerospace engineering, where size, weight, and/or price are strictly limited. A busbar current sensor with differential fluxgate in the hole has 1000 A range and 10 mA resolution. Using an asymmetric shape, we achieved a frequency error below ±3% up to 1 kHz, while keeping high temperature stability and low sensitivity to mechanical misalignments. The 2.5 mA/°C maximum dc drift is four times better than when using an AMR sensor and 1000 times better than when using a Hall sensor. The sensor linearity error is below 0.1%. [ABSTRACT FROM PUBLISHER]

Vector feedback is a concept which can significantly improve linearity and stability of a magnetic field sensor. The feedback coils effectively cancel the measured magnetic field in the inner volume of the triaxial sensor. Thus, in case of fluxgates, it suppresses one possible source of nonlinearity—cross-field sensitivity error. The triaxial sensor axes orthogonality should be primarily defined by the orientation of the feedback coils, while the sensitivities are defined by feedback coil constants. The influence of the homogeneity of the feedback field and the influence of the sensor inner layout on calibration parameters of a vectorially compensated triaxial fluxgate magnetometer are presented. [ABSTRACT FROM PUBLISHER]