Search

Alkali-activated materials (AAMs) are regarded as promising alternatives to Portland cement. However, the significant high shrinkage of AAMs, particularly in alkali-activated slag system, is a critical issue that hinders their wide application. This study investigated the effect of expansive admixture, i.e. CaO on the autogenous shrinkage and drying shrinkage of alkali-activated slag/ fly ash microsphere (AASFAM). The effect of CaO content on heat evolution, reaction products, microstructure development and compressive strength was systematically investigated. The results revealed that the addition of CaO can effectively reduce both the autogenous and drying shrinkage of AASFAM. Mixture with 3% and 5% CaO exhibited expansion within the first 24 hours after casting, while the drying shrinkage was reduced by 72% and 82%, respectively. The addition of CaO promoted the formation of crystalline phases including Ca(OH) 2 , hydrotalcite and calcite, leading to a lower free water content and coarser pore structure, which in turn reduced the capillary stress during the drying process. The results demonstrated the promising potential of CaO in effectively mitigating the high autogenous shrinkage and drying shrinkage of AAMs without compromising its mechanical properties. • The addition of CaO can effectively reduce both the autogenous and drying shrinkage of AASFAM. • The addition of CaO facilitates the crystalline phases in AASFAM including Ca(OH) 2 , hydrotalcite and calcite. • The formation of Ca (OH) 2 led to a larger pore size distribution. [ABSTRACT FROM AUTHOR]

The development of smart concretes with self-sensing properties has gained increasing attention recently. In this study, the effect of different precursors, including blast furnace slag, fly ash, silica fume, and metakaolin, on the electrical conductivity and piezoresistive properties of alkali-activated materials (AAMs) with and without carbon fiber (CF) was investigated. The experimental results revealed that the electrical and self-sensing properties of AAMs were significantly influenced by the raw materials, both with and without carbon fiber. However, distinct trends were observed. The use of silica fume (25 wt%) was beneficial to the self-sensing property of CF-AAM mortars. Mixtures containing fly ash and pure slag exhibited higher sensitivity but with reduced repeatability of the piezoresistivity. Due to the poor dispersion of carbon fibers, as well as the porous microstructure, mixtures with metakaolin had poorer conductivity and piezoresistivity. AAM mortars had evident piezoresistivity under cyclic loading, but their stability was inferior to that of AAM with carbon fibers. The pore size distribution and gel pore quantity of the binder phase were important factors determining the conductive and piezoresistive properties of CF-AAM mortars. • AAM mortars without carbon fiber presented evident piezoresistivity but with poor stability. • The use of silica fume was beneficial to the self-sensing property of CF-AAM. • Mixtures with metakaolin had poorer conductivity and piezoresistivity. • The pore size distribution and gel pore quantity were important for the conductivity of CF-AAM. [ABSTRACT FROM AUTHOR]