Search

Supplemental material, sj-docx-1-pie-10.1177_09544089221150740 for A role of biomaterials in tissue engineering and drug encapsulation by Reeya Agrawal, Sangeeta Singh, Kuldeep K. Saxena and Dharam Buddhi in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering

Supplemental material, sj-docx-4-pie-10.1177_09544089231156053 for Heat transfer evaluation of single and hybrid nanofluids as cooling media in car radiators: A 3D-CFD approach in flat tubes by Mohammad Bagher Kiaei, Pouyan Adibi and Ehsan Abedini in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering

Supplemental material, sj-docx-1-pie-10.1177_09544089231163120 for Built-up edge formation and flank wear evolution in conventional machining of AZ91 magnesium alloy by Assem Alshibi, Abdelrahman Nasreldin and Salman Pervaiz in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering

Supplemental material, sj-docx-1-pie-10.1177_09544089231163724 for Multi-response optimization on abrasive water jet machining of Aluminum 7075 alloy using Taguchi–DEAR methodology by Ayyagounder Shanmugam, Thangamuthu Mohanraj, Kasilingam Krishnamurthy, Ali Kaya Gur and Ugur Caligulu in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering

Supplemental material, sj-docx-1-pie-10.1177_09544089231151573 for Performance augmentation of a solar thermal desalination system using different floating absorber plates by Ashish Chandran K., Arun K. Raj and Sujith Kumar C.S. in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering

Supplemental material, sj-docx-6-pie-10.1177_09544089231162292 for Effect of alkali treatment on cotton/bamboo fibres for application as a reinforcement material by A Karthik, Jafrey Daniel James D, PS Sampath and V Thirumurugan in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering

Supplemental material, sj-docx-1-pie-10.1177_09544089231172029 for Detection and evaluation of load oscillations in induction motors based on MCSA by Yuejiang Han, Jianping Yuan, Yin Luo, Jiamin Zou and Xuecong Qin in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering

Supplemental Material for Intraoperative Determination of Bronchus Stump and Anastomosis Perfusion with Hyperspectral Imaging by David B. Ellebrecht and Christian Kugler in Surgical Innovation

Supplemental Material for Immersive Live Streaming of Surgery Using 360-Degree Video to Head-Mounted Virtual Reality Devices: A New Paradigm in Surgical Education by Alejandro Gandsas, MD, MBA, Trevor Dorey, MD, MSc, and Adrian Park, MD in Surgical Innovation

Supplemental material, sj-docx-1-pie-10.1177_09544089231169646 for Surface pre-reacted glass reinforced dental composite: Performance assessment of physicochemical, static mechanical, dynamic mechanical and wear properties by Shiv Ranjan Kumar and Ajay Sharma in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering

Supplemental material, sj-docx-1-pie-10.1177_09544089231159180 for Microstructure and mechanical properties of A7N01-T4 aluminum alloy metal inert gas welded joints filled with self-designed 7A48 aluminum alloy wire by Zhi Li, Rongzheng Xu, Xuming Guo, Yan Zhang and Zhicheng Wei in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering

Supplemental material, sj-pdf-1-tim-10.1177_01423312231164455 for RDB-CSCA: A deep learning method to identify the spectral information for tracing the egg quality by Chaohua Yan and An Lu in Transactions of the Institute of Measurement and Control

Supplemental material, sj-docx-2-pie-10.1177_09544089231164836 for Multi-objective parametric optimization of AWJM process using Taguchi-based GRA and DEAR methodology by Venkateshwar Reddy Pathapalli, Srinivasa Rao Pittam, Venukumar Sarila, Dhanraj Burragalla and Arora Gagandeep in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering

Supplemental material, sj-docx-1-pie-10.1177_09544089231154528 for Thermal performance assessment of the coaxial pipe evacuated tube solar air heater in Bilaspur climatic conditions by Prashant Kumar Jangde and T V Arjunan in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering

Supplemental material, sj-docx-1-pie-10.1177_09544089221150703 for Investigations on erosion performance of carbon fiber–epoxy-based composite adhesion on 16Cr5Ni steel by Mithlesh Sharma, Deepak Kumar Goyal, Anuj Bansal, Anil Kumar Singla, Neel Kanth Grover, Munish Kumar Gupta and Navneet Khanna in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering

Supplemental material, sj-docx-2-pie-10.1177_09544089231157638 for Mechanical, thermal, and acoustic properties of natural fibre-reinforced polyester by Mohammed Y Abdellah, Mustafa Gamal Sadek, Hamzah Alharthi and G T Abdel-Jaber in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering

Supplemental material, sj-docx-3-pie-10.1177_09544089231159780 for Effect of deep cryogenic treatment, tempering temperature and time on hardness of Nimonic-90 by Gurkirat Singh and Kailash Nath Pandey in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering

Supplemental material, sj-docx-1-pie-10.1177_09544089231166651 for Effect of process parameters on surface roughness of NiCu alloy in fluid jet polishing by Shubham Choudhary, Ravinder Kumar Duvedi and Jaswinder Singh Saini in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering

Supplemental material, sj-docx-2-pio-10.1177_1748006X221146367 for A new failure times model for one and two failure modes system: A Bayesian study with Hamiltonian Monte Carlo simulation by Badamasi Abba and Hong Wang in Proceedings of the Institution of Mechanical Engineers, Part O: Journal of Risk and Reliability

Supplemental material, sj-pdf-1-pie-10.1177_09544089231173215 for GMA welding investigations on the effect of alternating shielding gases on bead profile characteristics of AA6061 aluminum alloy by Mahadevan G, Senthilkumar T and Ramasamy N in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering

Supplemental material, sj-docx-1-pie-10.1177_09544089231165128 for Casing failure mechanism and slip anchoring optimization of the compression packer in the oil and gas well by Yang Tang, Jie Wang, Minghai Zhou, Guangyao Li and Xiao Xiao in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering

Supplemental material, sj-docx-1-pim-10.1177_14750902231166442 for Energy-specific greenhouse gas emissions measurements from 2-stroke marine diesel engine using liquefied natural gas by Kang-Ki Lee, Wilfried Hochegger and Alessandro Schönborn in Proceedings of the Institution of Mechanical Engineers, Part M: Journal of Engineering for the Maritime Environment

Supplemental material, sj-docx-1-pie-10.1177_09544089231166303 for Analyzing the geometrical errors of silicon nitride-titanium nitride on performing electric discharge machining using response surface methodology by Selvarajan Lakshmanan, Rajavel Rajendran, Senthil Kumar Shanmugakani and Venkataramanan Krishnamoorthy in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering

Supplemental material, sj-docx-1-pie-10.1177_09544089231151541 for Prediction of stability parameters of ferric oxide nanofluids using response surface methodology based on desirability approach by KPV Krishna Varma, Kavati Venkateswarlu, PV Durga Prasad and Uday Kumar Nutakki in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering

Supplemental material, sj-docx-1-pie-10.1177_09544089231151536 for Study on damaged micro-mechanism of pipe wall during braking and anchoring process of pipeline intelligent plugging robot by Yang Tang, Zhou Minghai, Peng Sun, Jie Wu, Qiang Wang and Ju Wu in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering

Supplemental material, sj-docx-3-pie-10.1177_09544089231167761 for Intelligent assessment of quality characteristics of miscanthus fiber-reinforced polypropylene for sustainable products development by Chukwutoo Christopher Ihueze, Okoli Ndubuisi Celestine, Uchendu Onwusoronye Onwurah, Christian Emeka Okafor and Queeneth Adesuwa Kingsley-Omoyibo in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering

Supplemental material, sj-docx-2-pie-10.1177_09544089231172163 for Soret and Dufour effects on the magnetohydrodynamic free convective flow of Maxwell nanofluid past an infinite stretching sheet by M Harikrushna, G Prabhakara Rao and M Veera Krishna in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering

Supplemental material, sj-docx-2-pie-10.1177_09544089231170999 for Parametric optimization and ranking analysis of basalt fiber–marble dust particulates–polyamide 66 polymer composites under dry sliding wear investigation by Ravi Prakash Sharma, Ankit Sharma, Sudhanraj Jeganmohan, Mukesh Kumar and Ashiwani Kumar in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering

Supplemental material, sj-docx-1-pie-10.1177_09544089231158187 for Planar parallel manipulators: A review on kinematic, dynamic, and control aspects by Rutupurna Choudhury and Yogesh Singh in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering

Supplemental material, sj-docx-1-pie-10.1177_09544089221150740 for A role of biomaterials in tissue engineering and drug encapsulation by Reeya Agrawal, Sangeeta Singh, Kuldeep K. Saxena and Dharam Buddhi in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering

Supplemental material, sj-docx-2-pie-10.1177_09544089231160003 for Analyzing the tribological and mechanical performance of Al-6061 with rare earth oxides: An experimental analysis by Vipin Kumar Sharma, Pardeep Kumar, Shalom Akai, Vinod Kumar and Ravinder Singh Joshi in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering

Supplemental material, sj-docx-2-pie-10.1177_09544089231151541 for Prediction of stability parameters of ferric oxide nanofluids using response surface methodology based on desirability approach by KPV Krishna Varma, Kavati Venkateswarlu, PV Durga Prasad and Uday Kumar Nutakki in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering

Supplemental material, sj-docx-1-pie-10.1177_09544089231158953 for Experimental study on leakage location of branched pipelines based on acoustic propagation characteristics by Si-Liang Zhao, Shao-Gang Liu, Dan Zhao, Bo Qiu, Zhou Hong and Xuan-Long Shi in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering

Supplemental material, sj-docx-1-pie-10.1177_09544089231172018 for Microstructure, mechanical and magnetic properties of a nickel-free austenitic stainless steel fabricated by hot powder forging by Amir Tangestani, Mohammad Jafar Hadianfard and Daryoosh Vashaee in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering

Supplemental material, sj-docx-1-pie-10.1177_09544089231158507 for Performance of parabolic trough solar collector with spinning star inserts in receiver tube with hybrid nanofluid by Oveepsa Chakraborty, Biplab Das and Rajat Gupta in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering

Supplemental material, sj-docx-1-sdj-10.1177_03093247221150044 for Finite element implementation of the aortic double-dispersion fibre model and development of a predictive damage model by A. Corvi and L. Collini in The Journal of Strain Analysis for Engineering Design

Supplemental material, sj-docx-1-pie-10.1177_09544089231162778 for Comparative study of microwave and thermal curing processes in terms of temperature characteristics and mechanical performance of carbon fibre composites by Rajeev Kumar and Sunny Zafar in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering

Supplemental material, sj-docx-1-pie-10.1177_09544089221150703 for Investigations on erosion performance of carbon fiber–epoxy-based composite adhesion on 16Cr5Ni steel by Mithlesh Sharma, Deepak Kumar Goyal, Anuj Bansal, Anil Kumar Singla, Neel Kanth Grover, Munish Kumar Gupta and Navneet Khanna in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering

Supplemental material, sj-docx-9-pie-10.1177_09544089231162292 for Effect of alkali treatment on cotton/bamboo fibres for application as a reinforcement material by A Karthik, Jafrey Daniel James D, PS Sampath and V Thirumurugan in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering

Supplemental material, sj-docx-1-pie-10.1177_09544089231175204 for A study on microchip cooling performance increment by using air jet impingement with one and double rows by Koray Karabulut and Yeliz Alnak in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering

Supplemental material, sj-docx-1-pie-10.1177_09544089231151865 for Application of Taguchi coupled with genetic algorithm (GA) for optimizing surface quality in drilling of duplex stainless steel 2205 by Rajeev Sharma, Vipin Pahuja and Binit Kumar Jha in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering

Supplemental material, sj-pdf-1-pie-10.1177_09544089231160586 for Study the combined effect of electric field and variable viscosity on the stability of dielectric nanofluid (CuO + water) within a Hele–Shaw cell by Awanish Kumar and Beer Singh Bhadauria in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering

Supplemental material, sj-docx-2-pie-10.1177_09544089231169646 for Surface pre-reacted glass reinforced dental composite: Performance assessment of physicochemical, static mechanical, dynamic mechanical and wear properties by Shiv Ranjan Kumar and Ajay Sharma in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering

Supplemental material, sj-pdf-1-pio-10.1177_1748006X221146367 for A new failure times model for one and two failure modes system: A Bayesian study with Hamiltonian Monte Carlo simulation by Badamasi Abba and Hong Wang in Proceedings of the Institution of Mechanical Engineers, Part O: Journal of Risk and Reliability

Supplemental material, sj-docx-1-pie-10.1177_09544089231163120 for Built-up edge formation and flank wear evolution in conventional machining of AZ91 magnesium alloy by Assem Alshibi, Abdelrahman Nasreldin and Salman Pervaiz in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering

Supplemental material, sj-docx-5-pie-10.1177_09544089231158253 for Experimental investigations and parametric effects on depositions of super duplex stainless steel in wire arc additive manufacturing by Prakash Kumar and Kuntal Maji in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering

Supplemental material, sj-docx-1-pie-10.1177_09544089231158187 for Planar parallel manipulators: A review on kinematic, dynamic, and control aspects by Rutupurna Choudhury and Yogesh Singh in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering

Supplemental material, sj-docx-3-pie-10.1177_09544089221150709 for Extrusion strategies in fused deposition additive manufacturing: A review by Krishnanand, Varanjot Singh, Vatsal Mittal, Amar Kumar Branwal, Krishnendra Sharma and Mohammad Taufik in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering

Supplemental material, sj-docx-1-pie-10.1177_09544089221150731 for Investigation of mechanical behavior of graphene nanoplatelets and carbon fiber-reinforced hybrid laminate composites under different environment aging conditions by Anurag Namdev, Amit Telang and Rajesh Purohit in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering

Supplemental material, sj-docx-9-pie-10.1177_09544089231158253 for Experimental investigations and parametric effects on depositions of super duplex stainless steel in wire arc additive manufacturing by Prakash Kumar and Kuntal Maji in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering