Search

Pressure retarded osmosis (PRO) is an innovative technique to yield osmotic energy. Nevertheless, the PRO performance is exacerbated by the severe membrane fouling occurring within the porous support. It is a potential alternative for sustainable power harvesting to change the membrane orientation from active layer facing draw solution (AL−DS) or PRO mode to active layer facing feed solution (AL−FS) or FO mode for a low-fouling propensity. A novel integral PRO hollow fiber membrane was developed in this work by phase inversion and followed with a facile cross-linking post-treatment. The structure and properties of the resultant membrane were systematically investigated using a series of characterization protocols. The PRO performance of the membrane was studied under various hydraulic pressures at the AL−FS orientation. The results reveal that the substrate with sponge-like structure and relatively dense inner surface can better withstand high pressure in PRO process. Two steps of cross-linking endowed the membrane with a smaller pore size on the outer surface that exhibits high rejection against various inorganic salts. The novel integral membrane can achieve a stable power density output around 4.3 W m −2 at 12 ~ 13 bar hydraulic pressure, using a real wastewater reverse osmosis (RO) retentate and 1.0 M sodium chloride as the feed and draw stream, correspondingly. This result demonstrates that the PRO operation in the AL−FS orientation (FO mode) offers a significant advantage over the AL−DS orientation (PRO mode) by eliminating the pretreatment of the feed water or/and other measures associated with membrane fouling control in the PRO mode. To implement the PRO operation with the AL−FS orientation, developing a robust membrane with an integral structure is critical. The newly developed integral hollow fiber membrane via chemical cross-linking presents the potential for PRO operation in the AL−FS orientation. [ABSTRACT FROM AUTHOR]

Abstract: Forward osmosis (FO) is attracting increasing interest for its potential applications in water and wastewater treatment and desalination. One of the major drawbacks of FO is internal concentration polarization (ICP), which significantly limits the FO flux efficiency. In addition, FO membrane flux can be adversely affected by membrane fouling. The effects of ICP and fouling on FO flux behavior were systematically investigated in the current study. Both theoretical model and experimental results demonstrated that the FO flux was highly non-linear with respect to the apparent driving force (the concentration difference between the draw solution and the feed water) as a result of ICP. ICP played a dominant role on FO flux behavior at greater draw solution concentrations and/or greater membrane fluxes due to the exponential dependence of ICP on flux level. Compared to the active layer facing draw solution (AL-facing-DS) configuration, more severe ICP was observed when the membrane active layer faced the feed water (AL-facing-FW) as a result of dilutive ICP in the FO support layer. Interestingly, the AL-facing-FW configuration showed remarkable flux stability against both dilution of the bulk draw solution and membrane fouling. In this configuration, any attempt to reduce membrane flux was compensated by a reduced level of ICP. The net result was only a marginal flux reduction. In addition, foulant deposition was insignificant in this configuration. Thus, the AL-facing-FW configuration enjoyed inherently stable flux, however, at the expense of severer initial ICP. In contrast, the AL-facing-DS configuration suffered severe flux reduction as porous membrane support faced the humic acid containing feed water. The flux loss in this configuration was likely due to the combined effects of (1) the internal clogging of the FO support structure as well as (2) the resulting enhanced ICP in the support layer. The latter was caused by reduced porosity and reduced mass transfer coefficient of the support. The pore clogging enhanced ICP mechanism probably played a dominant role in FO flux reduction at higher flux levels. To the authors’ best knowledge, this is the first study to systematically demonstrate the coupled effects of ICP and fouling on the FO flux behavior. [Copyright &y& Elsevier]