Search

Injuries and diseases of the skin require accurate treatment using nontoxic and noninvasive biomaterials, which aim to mimic the natural structures of the body. There is a strong need to develop biodevices capable of accommodating nutrients and bioactive molecules and generating the process of vascularization. Electrospinning is a robust technique, as it can form fibrous structures for tissue engineering and wound dressings. The best way of forming such meshes for wound healing is to choose two polymers that complement each other regarding their properties. On the one hand, PVA is a water-soluble synthetic polymer widely used for the preparation of hydrogels in the field of biomedicine owing to its biocompatibility, water solubility, nontoxicity, and considerable mechanical properties. PVA is easy to subject to electrospinning and can offer strong mechanical stability of the mesh, but it is necessary to improve its biological properties. On the other hand, CS has good biological properties, including biodegradability, nontoxicity, biocompatibility, and antimicrobial properties. Still, it is harder to electrospin and does not possess as good mechanical properties as PVA. As these structures also allow the incorporation of bioactive agents due to their high surface-area-to-volume ratio, the interesting point was to incorporate usnic acid into the structure as it is a natural and suitable alternative agent for burn wounds treatment which avoids an improper or overuse of antibiotics and other invasive biomolecules. Thus, we report the fabrication of an electrospun nanofibrous mesh based on PVA, chitosan, and usnic acid with applications in wound healing. The obtained nanofibers mesh was physicochemically characterized by Fourier transform infrared spectroscopy (FT-IR) and scanning electron microscopy (SEM). In vitro biological assays were performed to evaluate the antimicrobial properties of the samples using the MIC (minimum inhibitory concentration) assay and evaluating the influence of fabricated meshes on the Staphylococcus aureus biofilm development, as well as their biocompatibility (demonstrated by fluorescence microscopy results, an XTT assay, and a glutathione (GSH) assay). [ABSTRACT FROM AUTHOR]

Graphical abstract Abstract The paper reports the synthesis and physico-chemical and biological characterization of novel wound dressings based on collagen and essential oil functionalized ZnO nanoparticles intended to improve the treatment of burns and to reduce the risk for developing wound sepsis in patients with burns or chronic wounds. The prepared wound dressings were physico-chemical characterized by Fourier-transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). In vitro biocompatibility and cytotoxicity was proved on human fibroblast cells, antimicrobial potential was assessed on Gram positive and Gram negative bacteria models (Staphylococcus aureus and Escherichia coli , respectively), while in vivo studies were performed on a rat burn wound experimental model. Functionalized ZnO nanoparticles (NPs) proved to range 15–20 nm in size and contain about 1% orange essential oil (EO), which was utilized as a natural antimicrobial agent. NPs are grain-shapped and have a low tendency to form aggregates. No toxicity was noticed in vitro , as human fibroblasts maintained a normal growth and their membrane integrity in the presence of EO functionalized NPs. The capacity of the prepared wound dressings to act as implantable bioresorbable scaffolds that accelerates wounds healing along with an excellent biocompatibility, lack of cytotoxicity and a good antibacterial activity, make these materials promising and safe candidates for wound dressing, especially in burn patients. [ABSTRACT FROM AUTHOR]

The aim of this study was to develop, characterize and assess the biological activity of a new regenerative 3D matrix with antimicrobial properties, based on collagen (COLL), hydroxyapatite (HAp), β-cyclodextrin (β-CD) and usnic acid (UA). The prepared 3D matrix was characterized by Scanning Electron Microscopy (SEM), Fourier Transform Infrared Microscopy (FT-IRM), Transmission Electron Microscopy (TEM), and X-ray Diffraction (XRD). In vitro qualitative and quantitative analyses performed on cultured diploid cells demonstrated that the 3D matrix is biocompatible, allowing the normal development and growth of MG-63 osteoblast-like cells and exhibited an antimicrobial effect, especially on the Staphylococcus aureus strain, explained by the particular higher inhibitory activity of usnic acid (UA) against Gram positive bacterial strains. Our data strongly recommend the obtained 3D matrix to be used as a successful alternative for the fabrication of three dimensional (3D) anti-infective regeneration matrix for bone tissue engineering. [ABSTRACT FROM AUTHOR]

Cutaneous wounds are often superinfected during the healing process and this leads to prolonged convalescence and discomfort. Usage of suitable wound dressings is very important for an appropriate wound care leading to a correct healing. The aim of this study was to demonstrate the influence of a nano-coated wound dressing (WD) on Candida albicans colonization rate and biofilm formation. The modified WD was achieved by submerging the dressing pieces into a nanofluid composed of functionalized magnetite nanoparticles and Satureja hortensis (SO) essential oil (EO). Chemical composition of the EO was established by GC-MS. The fabricated nanostructure was characterized by X-ray Diffraction (XRD), Transmission Electron Microscopy (TEM), Differential Thermal Analysis (DTA) and Fourier Transform-Infrared Spectroscopy (FT-IR). The analysis of the colonized surfaces using (Scanning Electron Microscopy) SEM revealed that C. albicans adherence and subsequent biofilm development are strongly inhibited on the surface of wound dressing fibers coated with the obtained nanofluid, comparing with regular uncoated materials. The results were also confirmed by the assay of the viable fungal cells embedded in the biofilm. Our data demonstrate that the obtained phytonanocoating improve the resistance of wound dressing surface to C. albicans colonization, which is often an etiological cause of local infections, impairing the appropriate wound healing. [ABSTRACT FROM AUTHOR]

This research focuses on the synthesis of multi-walled carbon nanotubes (MWCNTs) decorated with TiO2 nanoparticles (NPs) and incorporated in cellulose acetate-collagen film in order to obtain a new biomaterial with potential biomedical applications and improved antimicrobial activity. The successful decoration of the MWCNTs with TiO2 NPs was confirmed by several structural and morphological analysis, such as Fourier transformed infrared spectroscopy, Raman spectroscopy, X-ray diffraction and transmission electron microscopy. The obtained nanocomposites were further incorporated into cellulose acetate-collagen films, at different concentrations and absorption kinetics, antimicrobial activity and in vitro biocompatibility of the obtained films was investigated. The antimicrobial tests sustained that the presence of the nanocomposites into the polymeric matrix is an important aspect in increasing and maintaining the antimicrobial activity of the polymeric wound dressings over time. The biocompatibility and cytotoxicity of the obtained films was evaluated using cellular viability/proliferation assay and fluorescent microscopy which revealed the ability of the obtained materials as potential wound dressing biomaterial. [ABSTRACT FROM AUTHOR]

Staphylococcus aureus (Gram-positive) and Pseudomonas aeruginosa (Gram-negative) bacteria represent major infectious threats in the hospital environment due to their wide distribution, opportunistic behavior, and increasing antibiotic resistance. This study reports on the deposition of polyvinylpyrrolidone/antibiotic/isoflavonoid thin films by the matrix-assisted pulsed laser evaporation (MAPLE) method as anti-adhesion barrier coatings, on biomedical surfaces for improved resistance to microbial colonization. The thin films were characterized by Fourier transform infrared spectroscopy, infrared microscopy, and scanning electron microscopy. In vitro biological assay tests were performed to evaluate the influence of the thin films on the development of biofilms formed by Gram-positive and Gram-negative bacterial strains. In vitro biocompatibility tests were assessed on human endothelial cells examined for up to five days of incubation, via qualitative and quantitative methods. The results of this study revealed that the laser-fabricated coatings are biocompatible and resistant to microbial colonization and biofilm formation, making them successful candidates for biomedical devices and contact surfaces that would otherwise be amenable to contact transmission. [ABSTRACT FROM AUTHOR]

In this study, multi-walled carbon nanotubes (MWCNTs) were decorated with different types of nanoparticles (NPs) in order to obtain hybrid materials with improved antimicrobial activity. Structural and morphological analysis, such as Fourier transformed infrared spectroscopy, Raman spectroscopy, X-ray diffraction, transmission electron microscopy, environmental scanning electron microscopy/energy-dispersive X-ray spectroscopy and the Brunauer–Emmett–Teller technique were used in order to investigate the decoration of the nanotubes with NPs. Analysis of the decorated nanotubes showed a narrow size distribution of NPs, 7–13 nm for the nanotubes decorated with zinc oxide (ZnO) NPs, 15–33 nm for the nanotubes decorated with silver (Ag) NPs and 20–35 nm for the nanotubes decorated with hydroxyapatite (HAp) NPs, respectively. The dispersion in water of the obtained nanomaterials was improved for all the decorated MWCNTs, as revealed by the relative absorbance variation in time of the water-dispersed nanomaterials. The obtained nanomaterials showed a good antimicrobial activity; however, the presence of the NPs on the surface of MWCNTs improved the nanocomposites' activity. The presence of ZnO and Ag nanoparticles enhanced the antimicrobial properties of the material, in clinically relevant microbial strains. Our data proves that such composite nanomaterials are efficient antimicrobial agents, suitable for the therapy of severe infection and biofilms. [ABSTRACT FROM AUTHOR]

The present study reports on the development and evaluation of nanostructured composite coatings of polylactic acid (PLA) embedded with iron oxide nanoparticles (Fe3O4) modified with Eucalyptus (Eucalyptus globulus) essential oil. The co-precipitation method was employed to synthesize the magnetite particles conjugated with Eucalyptus natural antibiotic (Fe3O4@EG), while their composition and microstructure were investigated using grazing incidence X-ray diffraction (GIXRD), Fourier transform infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA), transmission electron microscopy (TEM) and dynamic light scattering (DLS). The matrix-assisted pulsed laser evaporation (MAPLE) technique was further employed to obtain PLA/Fe3O4@EG thin films. Optimal experimental conditions for laser processing were established by complementary infrared microscopy (IRM) and scanning electron microscopy (SEM) investigations. The in vitro biocompatibility with eukaryote cells was proven using mesenchymal stem cells, while the anti-biofilm efficiency of composite PLA/Fe3O4@EG coatings was assessed against Gram-negative and Gram-positive pathogens. [ABSTRACT FROM AUTHOR]

Plant extracts are highly valuable pharmaceutical complexes recognized for their biological properties, including antibacterial, antifungal, antiviral, antioxidant, anticancer, and anti-inflammatory properties. However, their use is limited by their low water solubility and physicochemical stability. In order to overcome these limitations, we aimed to develop nanostructured carriers as delivery systems for plant extracts; in particular, we selected the extract of Anthriscus sylvestris (AN) on the basis of its antimicrobial effect and antitumor activity. In this study, AN-extract-functionalized magnetite (Fe3O4@AN) nanoparticles (NPs) were prepared by the co-precipitation method. The purpose of this study was to synthesize and investigate the physicochemical and biological features of composite coatings based on Fe3O4@AN NPs obtained by matrix-assisted pulsed laser evaporation technique. In this respect, laser fluence and drop-casting studies on coatings were performed. The physical and chemical properties of laser-synthesized coatings were investigated by scanning electron microscopy, while Fourier transform infrared spectroscopy comparative analysis was used for determining the chemical structure and functional integrity. Relevant data regarding the presence of magnetic nanoparticles as the only crystalline phase and the size of nanoparticles were obtained by transmission electron microscopy. The in vitro toxicity assessment of the Fe3O4@AN showed significant cytotoxic activity against human adenocarcinoma HT-29 cells after prolonged exposure. Antimicrobial results demonstrated that Fe3O4@AN coatings inhibit microbial colonization and biofilm formation in clinically relevant bacteria species and yeasts. Such coatings are useful, natural, and multifunctional solutions for the development of tailored medical devices and surfaces. [ABSTRACT FROM AUTHOR]

Abstract: The aim of this study was to obtain a nano-active system to improve antibiotic activity of certain drugs by controlling their release. Magnetic composite nanomaterials based on magnetite core and cross-linked chitosan shell were synthesized via the co-precipitation method and characterized by Fourier transform infrared spectroscopy (FT-IR), infrared microscopy (IRM), scanning electron microscopy (SEM), dynamic light scattering (DLS), thermogravimetric analysis (TGA) and X-ray diffraction (XRD). The prepared magnetic composite nanomaterials exhibit a significant potentiating effect on the activity of two cationic (kanamycin and neomycin) drugs, reducing the amount of antibiotics necessary for the antimicrobial effect. The increase in the antimicrobial activity was explained by the fact that the obtained nanosystems provide higher surface area to volume ratio, resulting into higher surface charge density thus increasing affinity to microbial cell and also by controlling their release. In addition to the nano-effect, the positive zeta potential of the synthesized magnetite/cross-linked chitosan core/shell magnetic nanoparticles allows for a more favorable interaction with the usually negatively charged cell wall of bacteria. The novelty of the present contribution is just the revealing of this synergistic effect exhibited by the synthesized water dispersible magnetic nanocomposites on the activity of different antibiotics against Gram-positive and Gram-negative bacterial strains. The results obtained in this study recommend these magnetic water dispersible nanocomposite materials for applications in the prevention and treatment of infectious diseases. [Copyright &y& Elsevier]

The increasing rate of antibiotic resistant bacteria associated with nosocomial infections in severely ill patients has urged the need for new antibacterial therapies. Nanostructured materials represent emerging innovative approaches to controlled delivery of different antimicrobial drugs. Delivery systems encapsulating natural compounds with antibacterial effects, such as essential oils have shown a great potential. Herein we report the development of SiO 2 mesoporous nanosystems loaded with eucalyptus (EUC), orange (ORA), and cinnamon (CIN) essential oils. These systems were characterized with respect to morphology (using scanning electron microscopy, SEM, and transmission electron microscopy, TEM), porosity (by BET and TEM analysis), chemical composition (by X-ray diffraction, XRD, and Fourier transform infrared spectrometry, FTIR) and loading capacity (by thermogravimetric analysis, TGA). The anti-bacterial and anti-adherence effects were tested against clinically relevant microbial species ( Staphylococcus aureus ATCC 25923; Escherichia coli ATCC 25922; and Candida albicans ATCC 10231 ), while the biocompatibility was evaluated by in vitro tests with L929 mouse fibroblast cells. [ABSTRACT FROM AUTHOR]