Search

Detection of spark ignition engine firing is an important parameter to understand proper and improper combustion inside the engine cylinder. The engine firing can be detected by direct measurement of in-cylinder pressure by using piezo-electric sensor. However, the cost of the sensor is really high. Therefore, in this paper, engine firing has been detected by analysis of instantaneous angular speed (IAS) signal from output shaft measured by cheap device like rotary encoder. The direct short time Fourier transform (STFT) is unable to detect engine firing clearly as the signal contains various frequencies (rotational frequency and its harmonics) other than engine firing frequency. Therefore, an algorithm has been developed based on complementary ensemble empirical mode decomposition (CEEMD) and followed by STFT and applied on IAS signal to detect engine firing. Moreover, a comparative study has been performed between laser vibrometer signal and IAS signal to understand the efficacy of these signals. [ABSTRACT FROM AUTHOR]

A number of techniques for detection of faults in rolling element bearing using frequency domain approach exist today. For analysing non-stationary signals arising out of defective rolling element bearings, use of conventional discrete Fourier transform (DFT) has been known to be less efficient. One of the most suited time–frequency approach, wavelet transform (WT) has inherent problems of large computational time and fixed-scale frequency resolution. In view of such constraints, the Hilbert–Huang Transform (HHT) technique provides multi-resolution in various frequency scales and takes the signal''s frequency content and their variation into consideration. HHT analyses the vibration signal using intrinsic mode functions (IMFs), which are extracted using the process of empirical mode decomposition (EMD). However, use of Hilbert transform (HT)-based time domain approach in HHT for analysis of bearing vibration signature leads to scope for subjective error in calculation of characteristic defect frequencies (CDF) of the rolling element bearings. The time resolution significantly affects the calculation of corresponding frequency content of the signal. In the present work, FFT of IMFs from HHT process has been incorporated to utilise efficiency of HT in frequency domain. The comparative analysis presented in this paper indicates the effectiveness of using frequency domain approach in HHT and its efficiency as one of the best-suited techniques for bearing fault diagnosis (BFD). [Copyright &y& Elsevier]

Fault diagnosis of rotating machines is essential for the safe and efficient operation of maritime vessels. It prevents potential failures in rotating machines in maritime systems. Simultaneously developed faults severely damage the machines, leading to unprecedented incidents and higher maintenance costs. Data availability for developing multi-fault diagnosis solutions is limited, creating maintainability problems. The unavailability of data also causes further obstacles in the accurate diagnosis of machines. The efficiency of maritime machinery can be improved with intelligent diagnosis by advanced machine learning algorithms. This paper proposes a methodology to diagnose multi-faults with balanced and imbalanced acoustic, vibration and current signals datasets. After acquiring the data from an experimental setup under various speeds, a time-frequency-based Stepping Frame Synchrosqueezed Fourier Transform (SFSFT) is deployed in each segmented signal prior to feature extraction. The extracted features are used for training the Radial Basis Function Neural Network (RBFNN). Different balanced and imbalanced datasets are created to check the multi-fault classification ability of the proposed methodology. The results show that SFSFT-RBFNN is a generalised methodology, which performed tremendously well with a maximum classification accuracy of 100 % for balanced and imbalanced datasets in all three modality datasets. • Synchrosqueezed Fourier Transform is improved with stepping frame extraction method for multi-fault diagnosis. • Minute details of multi-fault signatures are extracted using SFSFT, and RBFNN is used for fault detection. • Performance of the proposed method is tested with balanced and different imbalanced datasets. • Methodology validation is carried out with acoustic, vibration and current datasets. [ABSTRACT FROM AUTHOR]