Search

Micro-CT imaging of samples of metallurgical coke was achieved at high resolution (~ 10 μm), using the Imaging and Medical Beamline of the Australian Synchrotron. The coke samples were then stressed to breaking point and imaged again. The result is that we can examine, in fine detail in 3D, the locations of the fracture surfaces in the coke, and their relationship to the different aspects of the microstructure. In addition, we have performed 3D finite element linear elasticity analysis, using the microstructure of the cokes as input to the calculations. The result is a 3D map of the von Mises stress in the structure, which provides information about the likely locations of fracture. Finally, we have performed a fractographic analysis of the fracture surfaces, in order to characterise the nature of the fracture mechanisms. The imaging and analysis has been performed for both compressive and mixed-mode loading of the coke samples. The work provides the opportunity to identify the key mechanisms for fracturing of coke due to the aspects of their microstructure, and has the potential to aid in the production of stronger metallurgical coke, by means of blending coals to produce coke with improved strength properties. [ABSTRACT FROM AUTHOR]

Metallurgical coke is a complex brittle heterogeneous material consisting of carbon derived from fusible, semi-fusible and inert coal particles that forms a porous composite matrix. This paper presents a novel approach to assess and quantify the breakage behaviour and microstructural weaknesses in a pilot oven metallurgical coke. The approach uses fractography, a method commonly applied to determine the fracture behaviour and origin(s) in homogeneous materials, such as metals and ceramics. Determination of the fracture origin(s), paths of crack propagation and microstructural weaknesses in such a complex heterogeneous material as metallurgical coke represents a significant advance in both the application of fractography and the assessment of coke strength and breakage behaviour. Identification of the key features that contribute to the coke’s failure will facilitate better prediction of coke strength from coal properties and ultimately optimisation of the coal blending process. Key features and markings have been clearly identified on fracture surfaces that can either be traced back to the fracture origin or give an indication of the type of fracture or stresses to which the coke has been subjected, including the directionality and strength of those stresses. These markings include hackle, hackle twist and wallner lines, as well as markings generated by conchoidal and overload fractures. A three-step approach was applied to determine the breakage behaviour in stabilized lumps of the pilot oven coke, in which fractured coke surfaces were analysed at the macro, micro and submicron levels. The observed mechanisms of failure were quantified and summarised using a radar diagram. [ABSTRACT FROM AUTHOR]

Metallurgical coke samples across the tuyere level of an operating blast furnace were analysed using a fractographic approach to identify and quantify various coke failure mechanisms. Tuyere level cokes displayed different failure mechanisms compared to the feed coke, implying a strong influence of the blast furnace reaction environment on the modification of coke failure mechanisms. The conchoidal and brittle overload type failures were noted to have an effect on the propagation of transgranular and intergranular crack growth in the coke microstructure. Feed coke breakage behaviour was strongly influenced by existing fissures and conchoidal fracture, while the breakage of the deadman coke lumps was dominated by pore wall collapse through intergranular crack growth in combination with erosive wear. The porosity at the IMDC–RMDC interface in coke has been identified as a critical parameter contributing to coke failure at tuyere regions. This fractographic study demonstrates that the fracture faces show evidence of the varying failure mechanisms presented in the preceding manuscripts (Part 1 and Part 2), in addition to the erosive wear resulting from the blast furnace exposure. However, further studies are required to establish the association between the identified coke failure mechanisms and coke texture, which has implications for improving coke performance in a blast furnace. [ABSTRACT FROM AUTHOR]

Metallurgical coke used in blast furnaces is the result of blending coals to achieve the optimum coke strength properties. Prediction of coke strength from coal properties relies primarily on statistical methods. Improvement of these models is desirable. We believe a better understanding of the fundamental factors controlling coke strength is required to achieve this. In this second of a series of three papers, we apply our recently developed fractographic approach to examine and quantify the breakage behaviour and microstructural weaknesses in pilot oven metallurgical cokes from two series of single coals and binary blends of the coals. We have successfully applied fractography to perform an effective failure analysis of the complex, heterogeneous coke material. Summaries of the factors contributing to the failure of each coke studied have been presented as radar graphs. These graphs demonstrate that the failure profile of the cokes from blends is not simply a weighted average of the fracture behaviour of the cokes from the constituent single coals. Instead, non-additive effects are observed, and this may have implications for the mathematical models widely used to predict coke behaviour and strength in the blast furnace. Trends between the various fractographic parameters have been identified, and preliminary relation of these to both the maximum compressive strength of each coke and basic properties of the original coals, has been completed. Enhanced understanding of how the fracture behaviour of each coke relates to the properties of the coal blend used will help facilitate better prediction of coke strength from coal properties and ultimately optimisation of the coal blending process. [ABSTRACT FROM AUTHOR]