Search

Experimental characterization of the structural, electronic and dynamic properties of dilute systems in aqueous solvents, such as nanoparticles, molecules and proteins, are nowadays an open challenge. X-ray absorption spectroscopy (XAS) is probably one of the most established approaches to this aim as it is element-specific. However, typical dilute systems of interest are often composed of light elements that require extreme-ultraviolet to soft X-ray photons. In this spectral regime, water and other solvents are rather opaque, thus demanding radical reduction of the solvent volume and removal of the liquid to minimize background absorption. Here, we present an experimental endstation designed to operate a liquid flat jet of sub-micrometre thickness in a vacuum environment compatible with extreme ultraviolet/soft XAS measurements in transmission geometry. The apparatus developed can be easily connected to synchrotron and free-electron-laser user-facility beamlines dedicated to XAS experiments. The conditions for stable generation and control of the liquid flat jet are analyzed and discussed. Preliminary soft XAS measurements on some test solutions are shown. [ABSTRACT FROM AUTHOR]

Laser‐slicing at a diffraction‐limited storage ring light source in the soft X‐ray region is investigated with theoretical and numerical modelling. It turns out that the slicing efficiency is favoured by the ultra‐low beam emittance, and that slicing can be implemented without interference to the standard multi‐bunch operation. Spatial and spectral separation of the sub‐picosecond radiation pulse from a hundreds of picosecond‐long background is achieved by virtue of 1:1 imaging of the radiation source. The spectral separation is enhanced when the radiator is a transverse gradient undulator. The proposed configuration applied to the Elettra 2.0 six‐bend achromatic lattice envisages total slicing efficiency as high as 10−7, one order of magnitude larger than the demonstrated state‐of‐the‐art, at the expense of pulse durations as long as 0.4 ps FWHM and average laser power as high as ∼40 W. [ABSTRACT FROM AUTHOR]

Time-resolved investigations have begun a new era of chemistry and physics, enabling the monitoring in real time of the dynamics of chemical reactions and matter. Induced transient optical absorption is a basic ultrafast electronic effect, originated by a partial depletion of the valence band, that can be triggered by exposing insulators and semiconductors to sub-picosecond extreme-ultraviolet pulses. Besides its scientific and fundamental implications, this process is very important as it is routinely applied in free-electron laser (FEL) facilities to achieve the temporal superposition between FEL and optical laser pulses with tens of femtoseconds accuracy. Here, a set of methodologies developed at the FERMI facility based on ultrafast effects in condensed materials and employed to effectively determine the FEL/laser cross correlation are presented. [ABSTRACT FROM AUTHOR]

Stimulated emission is a fundamental process in nature that deserves to be investigated and understood in the extreme ultra-violet (EUV) and x-ray regimes. Today, this is definitely possible through high energy density free electron laser (FEL) beams. In this context, we give evidence for soft-x-ray stimulated emission from a magnesium oxide solid target pumped by EUV FEL pulses formed in the regime of travelling-wave amplified spontaneous emission in backward geometry. Our results combine two effects separately reported in previous works: emission in a privileged direction and existence of a material-dependent threshold for the stimulated emission. We develop a novel theoretical framework, based on coupled rate and transport equations taking into account the solid-density plasma state of the target. Our model accounts for both observed mechanisms that are the privileged direction for the stimulated emission of the Mg L2,3 characteristic emission and the pumping threshold. [ABSTRACT FROM AUTHOR]

We present an overview of the FERMI (acronym of Free Electron laser Radiation for Multidisciplinary Investigations) seeded free electron laser (FEL) facility located at the Elettra laboratory in Trieste. FERMI is now in user operation with both the FEL lines FEL-1 and FEL-2, covering the wavelength range between 100 nm and 4 nm. The seeding scheme adopted for photon pulse production makes FERMI unique worldwide and allows the extension of table top laser experiments in the extreme ultraviolet/soft X-ray region. In this paper, we discuss how advances in the performance of the FELs, with respect to coherent control and multi-colour pulse production, may push the development of original experimental strategies to study non-equilibrium behaviour of matter at the attosecond-nanometer time-length scales. This will have a tremendous impact as an experimental tool to investigate a large array of phenomena ranging from nano-dynamics in complex materials to phenomena that are at the heart of the conversion of light into other forms of energy. [ABSTRACT FROM AUTHOR]

Time resolved extreme ultraviolet (EUV) transient reflectivity measurements on non-equilibrium amorphous carbon (a-C) have been carried out by combining optical and free electron laser (FEL) sources. The EUV probing was specifically sensitive to lattice dynamics, since the EUV reflectivity is essentially unaffected by the photo-excited surface plasma. Data have been interpreted in terms of the dynamics of an expanding surface, i.e., a density gradient rapidly forming along the normal surface. This allowed us to determine the characteristic time (τ ... 1 ps) for hydrodynamic expansion in photo-excited a-C. This finding suggests an extremely narrow time window during which the system can be assumed to be in the isochoric regime, a situation that may complicate the study of photo-induced metastable phases of carbon. Data also showed a weak dependence on the probing EUV wavelength, which was used to estimate the electronic temperature (Te ≈ 0.8 eV) of the excited sample. This experimental finding compares fairly well with the results of calculations, while a comparison of our data and calculations with previous transient optical reflectivity measurements highlights the complementarities between optical and EUV probing. [ABSTRACT FROM AUTHOR]

A new high-performance method for the free-electron laser (FEL) focused beam diagnosis has been successfully tested at the FERMI FEL in Trieste, Italy. The novel pixelated phosphor detector (PPD) consists of micrometric pixels produced by classical UV lithography and dry etching technique, fabricated on a silicon substrate, arranged in a hexagonal geometry and filled with suitable phosphors. It has been demonstrated that the overall resolution of the system has increased by reducing the diffusion of the light in the phosphors. Various types of PPD have been produced and tested, demonstrating a high resolution in the beam profile and the ability to measure the actual spot size shot-to-shot with an unprecedented resolution. For these reasons, the proposed detector could become a reference technique in the FEL diagnosis field. [ABSTRACT FROM AUTHOR]

Ultrafast time-resolved extreme ultraviolet (EUV) reflectivity measurements of optically pumped amorphous carbon (a-C) have been performed with the FERMI free electron laser (FEL). This work extends the energy range used in previous reflectivity studies and adds polarization dependence. The EUV probe is known to be sensitive to lattice dynamics, since in this range the reflectivity is essentially unaffected by the photo-excited surface plasma. The exploitation of both s- and p-polarized EUV radiation permits variation of the penetration depth of the probe; a significant increase in the characteristic time is observed upon increasing the probing depth (1 vs. 5 ps) due to hydrodynamic expansion and consequent destruction of the excited region, implying that there is only a short window during which the probed region is in the isochoric regime. A weak wavelength dependence of the reflectivity is found, consistent with previous measurements and implying a maximum electronic temperature of 0.8 eV ± 0.4. [ABSTRACT FROM AUTHOR]

The design and main characteristics of the Wide Energy range Spectrometer at TIMEX (WEST) operating at the FERMI Free Electron Laser are described. WEST covers the entire photon energy range of the FERMI source including its fundamental emission (extreme ultraviolet region, EUV) and its highest harmonics (soft X-ray region) spanning about a thousand of electrovolts from 20 to 1000 eV. The instrument is specifically designed to measure FERMI FEL spectra with good resolving power (500 < R P < 7000) and provide remarkable signal to noise ratio adequate for single-shot experiments. Notably, WEST is aligned in transmission geometry downstream of the TIMEX experimental beamline thus offering a valid diagnostic tool for the characterization of both linear and nonlinear spectral effects driven by the interaction between FEL radiation and samples in gaseous, liquid and solid phase. Detailed theoretical analysis of the instrument performance complemented by experimental measurements is presented. Further possible upgrades of WEST are finally considered and discussed. [ABSTRACT FROM AUTHOR]

We have examined the transmission of soft X-ray pulses from the FERMI free electron laser through carbon films of varying thickness, quantifying nonlinear effects of pulses above and below the carbon K-edge. At typical of soft X-ray free electron laser intensities, pulses exhibit linear absorption at photon energies above and below the K-edge, ∼308 and ∼260 eV, respectively; whereas two-photon absorption becomes significant slightly below the K-edge, ∼284.2 eV. The measured two-photon absorption cross section at 284.18 eV (∼6 × 10 −48  cm 4  s) is 7 orders of magnitude above what is expected from a simple theory based on hydrogen-like atoms – a result of resonance effects. [ABSTRACT FROM AUTHOR]

High intensity pulses obtained by modern extreme ultraviolet (EUV) and x-ray photon sources allows the observation of peculiar phenomena in condensed matter. Experiments performed at the Fermi@Elettra FEL-1 free-electron-laser source at 23.7, 33.5, and 37.5 eV on Al thin films, for an intermediate-fluence range up to about 20J/cm2, show evidence for a nonmonotonic EUV transmission trend. A decreasing transmission up to about 5-10J/cm2 is followed by an increase at higher fluence, associated with saturable absorption effects. The present findings are interpreted within a simplified three-channel model, showing that an account of the interplay between ultrafast electron heating and saturation effects is required to explain the observed transmission trend. [ABSTRACT FROM AUTHOR]

Abstract: Novel possibilities for studying matter under extreme conditions are opened by the forthcoming availability of free electron laser (FEL) facilities generating subpicosecond photon pulses of high intensity in the VUV and X-ray range, which are able to heat thin samples up to the warm dense matter (WDM) regime. Pump-and-probe ultrafast techniques can be used to study the dynamics of phase transitions and characterize the states under extreme and metastable conditions. Ultrafast (10–100fs) bulk heating is seen as a novel route for accessing extremely high temperature regimes as well as the transition region between low-density and high density fluids, that is presently considered a no man''s land in simple liquids and glasses. Here we briefly describe the present status of the TIMEX end-station devoted to those experimental activities at the Fermi@Elettra FEL facility, and some preliminary results obtained in a pilot ultrafast experiment using a laser source as a pump and a supercontinuum probe aimed to characterize the melting process of Silicon. [Copyright &y& Elsevier]

Abstract: Present and forthcoming free electron laser (FEL) large scale facilities deliver high fluence ultrafast soft and hard X-ray pulses able to create and probe warm dense matter (WDM). Proper diagnostic for basic physical quantities, like temperature and density, is necessary, but the short lifetime of the WDM state (few ps) makes their measurements a challenging task. In this work we propose a method to estimate the WDM temperature using the experimental information from a slow temperature pyrometric probe exploiting the properties of the heat diffusion equation. Numerical simulations show that for typical thin foil samples, a temperature measurement with temporal resolution at the distance of about from the beam center contains sufficient information to retrieve the initial spatial temperature distribution with sufficient accuracy providing information on the temperature reached in the WDM regime. The inversion of the experimental information is obtained by means of a Bayesian approach exploiting a Metropolis Monte Carlo numerical procedure. The model and calculations presented in this work provide the theoretical background for the development of a device for temperature diagnostics of the TIMEX end-station at the Fermi@Elettra FEL facility. [ABSTRACT FROM AUTHOR]