Search

The application of non-stationary Lamb wave signals is a promising tool in various industrial applications where information about changes inside a structure is required. Phase velocity is one of the Lamb wave parameters that can be used for inhomogeneities detection. The possibility of reconstructing the segment of the phase velocity in a strong dispersion range using only two signals is proposed. The theoretical study is performed using signals of the A0 mode propagating in an aluminium plate at a frequency of 150 kHz, 300 kHz, 500 kHz and 900 kHz. The experiment was carried out at a value of 300 kHz. The studies conducted indicated that the maximum distance between two signals, at which the time-of-flight can be measured between the same phase points, is the main parameter for the two signals technique application. Theoretical and experimental studies were performed, and the mean relative error was calculated by comparing the obtained results with those calculated via the SAFE method. In the theoretical study, the mean relative error of 0.33% was obtained at 150 kHz, 0.22% at 300 kHz, 0.23% at 500 kHz and 0.11% at 900 kHz. The calculated mean relative errors δcph=0.91% and δcph=1.36% were obtained at different distances in the experimental study. The results obtained show that the estimation of the phase velocity in dispersion ranges using only two received signals was a useful tool that saved time and effort.

The 2D-FFT is described as a traditional method for signal processing and analysis. Due to the possibility to determine the time and frequency (t,f) domains, such a method has a wide application in various industrial fields. Using that method, the obtained results are presented in images only; thus, for the extraction of quantitative values of phase velocities, additional algorithms should be used. In this work, the 2D-FFT method is presented, which is based on peak detection of the spectrum magnitude at particular frequencies for obtaining the quantitative expressions. The radiofrequency signals of ULWs (ultrasonic Lamb waves) were used for the accuracy evaluation of the method. An uncertainty evaluation was conducted to guarantee the metrological traceability of measurement results and ensure that they are accurate and reliable. Mathematical and experimental verifications were conducted by using signals of Lamb waves propagating in the aluminum plate. The obtained mean relative error of 0.12% for the A0 mode (160 kHz) and 0.05% for the S0 mode (700 kHz) during the mathematical verification indicated that the proposed method is particularly suitable for evaluating the phase-velocity dispersion in clearly expressed dispersion zones. The uncertainty analysis showed that the plate thickness, the mathematical modeling, and the step of the scanner have a significant impact on the estimated uncertainty of the phase velocity for the A0 mode. Those components of uncertainty prevail and make about ~92% of the total standard uncertainty in a clearly expressed dispersion range. The S0 mode analysis in the non-dispersion zone indicates that the repeatability of velocity variations, fluctuations of the frequency of Lamb waves, and the scanning step of the scanner influence significantly the combined uncertainty and represent 98% of the total uncertainty.