Search

Voltage–current (V–I) droop control is becoming a promising alternative to achieve proper power sharing among the parallel-operated voltage-sourced inverters (VSIs). Compared with the conventional droop control, this method has a simpler structure and a better dynamic performance because it saves the power loop (including the low-pass filters). However, due to the absence of the power loop related to the system frequency, the synchronization of VSIs becomes an intractable issue. To tackle this, a communication-free algorithm to synchronize and control the VSIs is proposed. Initially, the principle of V–I droop control is presented straightforwardly based on the virtual impedance. Then, a synchronization algorithm is incorporated into the V–I droop controller for accurate power sharing. This algorithm adaptively adjusts the phase step of each VSI according to the phase differences between VSI and the ac bus. In this way, the phase differences of each VSI to the ac bus eventually converge to an identical value, thus realizing the synchronization of VSIs. A detailed parameter design method is also implemented considering both system stability and power quality. Finally, the proposed strategy is validated experimentally using a three-parallel-VSIs system. [ABSTRACT FROM AUTHOR]

In this paper, a dc-link voltage protection (DCVP) control method is proposed to address the dc-link overvoltage issue due to power backfeeding in a parallel uninterruptible power supply (UPS) system. The proposed control method is able to protect the inverter against the excessive dc-link voltage, which increases the system reliability and robustness. Moreover, a current sharing control strategy is proposed by online regulating the virtual resistance of each UPS module. The proposed current sharing control strategy is able to address the circulating fundamental and harmonic currents caused by the line impedance mismatching or power backfeeding issue in the UPS system. In addition, an improved consensus-based distributed controller is proposed to alleviate the overshoot issue during the transient process in voltage amplitude and frequency restoration. Finally, the feasibility of the proposed methods is verified by experimental results from the parallel UPS prototypes. [ABSTRACT FROM PUBLISHER]

A novel simple and effective autonomous current-sharing controller for parallel three-phase inverters is proposed in this paper. The proposed controller provides faster response and better accuracy in contrast to the conventional droop control, since this novel approach does not require any active or reactive power calculations. Instead, a synchronous-reference-frame (SRF) virtual impedance loop and an SRF-based phase-locked loop are used. Stationary analysis is provided in order to identify the inherent mechanism of the direct and quadrature output currents in relation to the voltage amplitude and frequency with different line impedances by means of the system transfer functions. Comparison experiments from two parallel inverters are presented to compare the control performance of the conventional droop control and the proposed control with different line impedances. In addition, experimental results from a setup with three parallel 2.2-kW inverters verify the effectiveness of the proposed control strategy in different scenarios. [ABSTRACT FROM AUTHOR]