Search

In this paper, a novel decorrelation-based concurrent digital predistortion (DPD) solution is proposed for dual-band transmitters (TXs) employing a single wideband power amplifier (PA), and utilizing only a single feedback receiver path. The proposed decorrelation-based parameter learning solution is both flexible and simple, and operates in a closed-loop manner, opposed to the widely applied indirect learning architecture. The proposed decorrelation-based learning and DPD processing can also be effectively applied to more ordinary single carrier/band transmissions, as well as generalized to more than two transmit bands. Through a comprehensive analysis covering both the DPD parameter learning and the main path processing, it is shown that the complexity of the proposed concurrent DPD is substantially lower compared with the other state-of-the-art concurrent DPD methods. Extensive set of simulation and RF measurement results are also presented, using base-station PAs as well as a commercial LTE-Advanced mobile PA, to evaluate and validate the effectiveness of the proposed DPD solution in various real world scenarios, incorporating both single-band and dual-band TX cases. The simulation and RF measurement results demonstrate excellent linearization performance of the proposed concurrent DPD, even outperforming current state-of-the-art methods, despite the significantly lower complexity. [ABSTRACT FROM AUTHOR]

In this paper, we provide detailed modeling of the spurious intermodulation distortion products appearing in the own receiver (RX) operating band as a result of coexisting transmitter (TX) and RX nonlinearities with noncontiguous carrier aggregation transmissions. Furthermore, an efficient digital front-end signal processing technique is proposed, which can flexibly mitigate the resulting RX in-band self-interference caused either by individual or simultaneously coexisting TX and RX nonlinearities. The technique is based on accurately estimating the effective leakage channel that models the nonlinearities of the TX and RX chains and the duplexer filters characteristics. In the parameter estimation stage, an observation RX chain is adopted for separately estimating the TX passband leakage response, which facilitates efficient joint estimation and regeneration of the TX- and RX-induced self-interference. In the online digital cancellation, the actual transmit data are used in conjunction with the estimated channel responses to generate a replica of the overall nonlinear self-interference, which is subsequently suppressed by subtracting it from the actual observation. In general, the proposed technique can efficiently estimate and suppress the self-interference at arbitrary spurious sub-bands located at the RX band. The performance evaluations with comprehensive numerical simulations and practical RF measurements indicate highly accurate and efficient operation, with up to 28 dB of measured self-interference suppression. [ABSTRACT FROM PUBLISHER]

Noncontiguous transmission schemes combined with high power-efficiency requirements pose big challenges for radio transmitter and power amplifier (PA) design and implementation. Due to the nonlinear nature of the PA, severe unwanted emissions can occur, which can potentially interfere with neighboring channel signals or even desensitize the own receiver in frequency division duplexing transceivers. In this paper, to suppress such unwanted emissions, a low-complexity subband digital predistortion solution, specifically tailored for spectrally noncontiguous transmission schemes in low-cost devices, is proposed. The proposed technique aims at mitigating only the selected spurious intermodulation distortion components at the PA output, hence allowing for substantially reduced processing complexity compared with classical linearization solutions. Furthermore, novel decorrelation-based parameter learning solutions are also proposed and formulated, which offer reduced computing complexity in parameter estimation as well as the ability to track time-varying features adaptively. Comprehensive simulation and RF measurement results are provided, using a commercial LTE-Advanced mobile PA, to evaluate and validate the effectiveness of the proposed solution in real-world scenarios. The obtained results demonstrate that highly efficient spurious component suppression can be obtained using the proposed solutions. [ABSTRACT FROM PUBLISHER]

In this paper, we present a novel digital predistortion (DPD) solution based on a direct learning approach, which is capable of reducing the unwanted emissions resulting from the power amplifier (PA) at any prespecified frequency located in the transmitter's out-of-band or spurious domain. The proposed scheme is based on evaluating the power spectral density (PSD) of the PA output signal and optimizing the DPD coefficients iteratively in order to minimize the output PSD around the prespecified frequency. To highlight the feasibility of the proposed implementation, the predistortion processing is kept as simple as possible, deploying quasi-memoryless polynomial models. Efficient mitigation of unwanted emissions around the target frequency is demonstrated via simulations and actual RF measurements, in both single- and dual-carrier waveform scenarios, using memoryless and memory-based PAs. The proposed DPD solution could be potentially employed in applications such as mobile devices utilizing noncontiguous multicarrier transmission, where the intermodulation spurs may overlap with the device's own receiver band, or could be potentially violating the spurious emission limits. Another target application is cognitive radio, where the PA may produce unwanted emissions that are interfering with primary-user transmissions. To the best of the authors' knowledge, there does not exist a similar technique in the open literature, and thus, the purpose of this paper is to encourage scientific discussions and technological innovations toward the creation of relatively low-complexity frequency-optimized predistortion techniques employed against selected unwanted emissions produced by the transmitter. [ABSTRACT FROM AUTHOR]