Search

Summary: This article presents a novel wearable frequency selective surface (FSS) for shielding the communication link of implantable devices with the external environment. The proposed shield blocks a dual‐band frequency operating at 404 MHz and 2.45 GHz in the medical implant communication service (MICS) and industrial, scientific, and medical (ISM) bands. The two distinct stop bands provide a high‐frequency band ratio of 6.02 in an ultra‐miniaturized physical form factor of 0.024λo × 0.024λo, with at least 76.96% miniaturization when compared to the existing art. Each of the unit cells is imprinted on a conformal 50 μm polyester substrate in a symmetrical configuration. The polyester adheres with jean to realize its compatibility with wearable applications. The designed shield system offers a low profile of only 0.00146λo. By suppressing the grating lobe, the proposed shield achieves a high angular stability of 80° and polarization insensitivity of 90° in both transverse electric (TE) and transverse magnetic (TM) modes. The FSS is fabricated and measured results validate its performance. To evaluate the physical insight, an equivalent circuit model (ECM) analysis is done. To ensure durability, the proposed shield system is tested with Amitech SDR04. [ABSTRACT FROM AUTHOR]

This paper presents a novel ultraminiaturized frequency selective surface (FSS) for L-band electromagnetic shielding applications. A basic square loop incorporated with folded arms in the top layer constructs the single-layer FSS design. Band-stop characteristics for the entire L-band operating frequency ranging from 1 GHz to 2 GHz are offered by the proposed design. An ultraminiaturized profile of 0.028λο × 0.028λο is achieved by the designed FSS, where λο corresponds to the lowest operating frequency, achieving at least 32.1% miniaturization when compared to the state-of-the-art FSS designs in the literature. Polarization insensitivity with a peak shielding effectiveness of 45.4 dB is manifested by the rotational symmetry of the proposed design. The proposed FSS exhibits excellent angular stability performance up to 80° with a frequency deviation of less than 1%. The equivalent circuit model helps to understand the working principle of the proposed FSS. The experimental results of the designed FSS prototype agree well with the simulation results. Hence, the proposed spatial filter is a suitable candidate for enhancing security in wireless communication at the carrier frequencies of GPS systems. [ABSTRACT FROM AUTHOR]

This paper presents the design of an Ultra‐wide band‐stop Frequency Selective Surface (FSS), the building block of which makes use of a modified Jerusalem cross loop structure. The proposed FSS unit cell has a coupled configuration with a modified Jerusalem cross loop on the top and a square loop on the rear side to operate over an ultra‐wide bandwidth. The proposed FSS design offers band‐stop characteristics over the entire UWB operating bandwidth extending from 2.95 to 12 GHz with a reference transmission loss of 10 dB. The proposed FSS unit cell has a miniaturized profile of 0.05λ˳ × 0.05λ˳ where the λ˳ corresponds to the free space wavelength at the lowest operating frequency. The rotational symmetry of the proposed FSS makes it polarization‐independent under both TE and TM modes of operation. Also, the proposed FSS exhibits a good angular stability response up to 60°. The prototype FSS is fabricated and the simulated results are validated using experimental measurements. Thus, the proposed FSS is a promising candidate for a multitude of applications such as spatial filtering (Bayatpur & Sarabandi, 2010, https://doi.org/10.1109/LMWC.2009.2038517), antenna gain enhancement (Chatterjee & Parui, 2016, https://doi.org/10.1109/TAP.2016.2552543), and electromagnetic shields (Chiu et al., 2008, https://doi.org/10.1109/TEMC.2008.2004560) operating over the UWB spectrum. Key Points: This paper presents the design of an Ultra‐wide band‐stop Frequency Selective Surface (FSS)The proposed FSS design offers band‐stop characteristics over the entire UWB operating bandwidthThe proposed FSS is a promising candidate for a multitude of applications such as spatial filtering, antenna gain enhancement [ABSTRACT FROM AUTHOR]

Contemplating the advancements in communication technology, the analysis of the features of reflectarray, transmitarray, and transmit‐reflectarray becomes essential for future adaptability. This article presents a thorough review of such high‐gain antennas, presenting some of the most relevant solutions published by the scientific society in the field of antennas and wave propagation. Several examples of unit cells for array implementation and complete array designs discussed in various literatures are analyzed. The analysis is focused in identifying the unit cell layouts, such as those developed using microstrip patches, frequency selective surfaces, or metamaterials. The analysis is extended to the ways of improving bandwidth, for example, true time delay elements, phase delay lines, meander lines, and so on, and the various methods used to enable reconfiguration, for example, p‐i‐n diodes, varactor diodes, or microelectromechanical systems. In addition, some antennas, which produce bidirectional beams simultaneously, are also discussed. Finally, all the models are compared against each other in order to highlight their benefits and limitations, summarizing their main characteristics, such as the frequency of operation, bandwidth, phase range, gain, aperture efficiency, sidelobe levels, cross polarization levels, and maximum beam‐steering range. [ABSTRACT FROM AUTHOR]

A reconfigurable frequency-selective surface (RFSS) for electromagnetic shielding applications is presented in this letter. The unit cell of the proposed RFSS contains a pair of shorted square loops separated by a uniform distance. Wideband RFSS with the frequency tuning ratio of 1:2.34 achieved by varying the horizontal spacing is proposed. The RFSS covers the frequencies 3.5, 5, and 5.8 GHz shielding the WiMAX, WLAN, and ISM/WiMAX bands, respectively. The prototype of the proposed RFSS is fabricated and loaded on to the mechanical tuning setup. The tuning setup has a box frame with rotating shafts attached to the bevel gears to control the horizontal spacing. The use of collapsible linkage mechanism ensures uniform spacing during reconfigurable operation. The simulated results are validated with measurements. The proposed FSS offers wideband frequency tuning for electromagnetic shielding applications. [ABSTRACT FROM AUTHOR]

A novel reconfigurable 3-D frequency selective surface (FSS) exhibiting bandstop response is proposed in this paper. The unit cell of the proposed 3-D FSS is constructed from concentric threaded cylinders. The proposed novel 3-D FSS achieves reconfigurability by sliding technique. It offers frequency tuning from 1.86 to 3.10 GHz by sliding the outer cylinder over the inner cylinder. The proposed FSS offers bandstop response in the L- and S-band microwave frequencies. In addition, the proposed 3-D FSS provides polarization- and angular-independent operation. The prototype of the 3-D FSS is fabricated, and the simulation results are validated using measurements. [ABSTRACT FROM PUBLISHER]

This paper presents a miniaturized frequency selective surface (FSS) with stop band characteristics at the resonant frequency of 5.12 GHz. The unit cell size of the proposed FSS design is in the order of 0.095 λ×0.095 λ. The proposed unit cell is obtained by convoluting the arms of the basic swastika structure. The design provides fractional bandwidth of 9.0 % at the center frequency of 5.12 GHz in the 20 dB reference level of insertion loss. The symmetrical aspect of the design delivers identical response for both transverse electric (TE) and transverse magnetic (TM) modes thereby exhibiting polarization independent operation. The miniaturized design provides good angular independency for various incident angles. The dispersion analysis is done to substantiate the band stop operation of the convoluted swastika FSS. The proposed FSS is fabricated and its working is validated through measurements. [ABSTRACT FROM AUTHOR]

A low profile dual-band frequency selective surface (FSS) for shielding the GSM applications is presented in this paper. The proposed FSS contains the unit cell made of modified double square loop elements with paper as its substrate. The overall thickness of the proposed FSS measures only 0.55 mm. The FSS offers band stop response at 930 and 1720 MHz with 18 dB shielding effectiveness for a bandwidth of 100 and 173 MHz, respectively, thus shielding the GSM signals. Additionally, the modified double square loop element-based FSS is symmetrical providing the advantage of polarization independency. It also exhibits angular stability up to 60° for both the horizontal polarized electric field (TE mode) and vertically polarized electric field (TM mode). A prototype of the proposed dual-band low profile FSS is fabricated. The simulation results are compared with the experimental results and are found to be in congruence with each other. [ABSTRACT FROM PUBLISHER]

This paper describes a novel FSS which functions as band stop filter to shield the GSM 1800 MHz downlink band. The FSS is designed to operate with the resonant frequency of 1820 MHz which is the centre frequency for the GSM 1800 MHz downlink band. The novelty is attributed to its unique geometry and the circular apertures endowed with it. The proposed geometry provides shielding effectiveness of 20 dB alongside with 133 MHz bandwidth. The structure holds identical response for both TE and TM Modes of polarization. In addition, the geometry with its circular apertures, a hitherto unexplored feasibility serves the purpose of ventilation and heat dissipation. The simulated results are validated using experimental measurements. [ABSTRACT FROM AUTHOR]

A novel angular independent dual-band FSS with closely spaced response is discussed in this letter. The proposed single layer FSS comprises of unit cell resembling crooked cross geometry convoluted and branched to provide dual resonant paths. The FSS functioning as a band stop filter at 2.54 and 3.54 GHz works as a shielding component for S band operation. The unit cell size of the proposed FSS is 0.088 \lambda \times 0.088 \lambda where \lambda corresponds to the wavelength of the first resonant frequency. Both the bands are closely spaced providing the frequency ratio of upper to the lower resonant frequency value of 1.39. Additionally, the proposed dual-band FSS is symmetrical in nature, thereby providing identical stop-band response for both TE and TM operation modes. It also exhibits highly stable angular stability. Prototype of the proposed FSS is fabricated and its simulated results are compared with the experimental results. [ABSTRACT FROM PUBLISHER]

A low profile flexible linear to circular polarizer made of paper substrate is proposed in this paper. The polarizer is constructed from frequency selective surface (FSS) comprising of crossed dipole unit cell elements. The polarizer converts the linearly polarized incident electromagnetic wave to circular polarized wave at 7.0 GHz. The polarizer provides the advantage of use in conformal system, which is substantiated using bending analysis. The proposed reflective polarizer provides a 3 dB axial ratio bandwidth of 13% at the center frequency of 7.0 GHz. In addition, the proposed flexible polarizer provides stable response for angular incidences up to 30°. Prototype of the flexible FSS polarizer is fabricated and its simulation results are validated with experimental measurements. [ABSTRACT FROM AUTHOR]

A novel single layer miniaturized frequency selective surface made of circular unit cell elements is presented in this article. The frequency selective surface (FSS) unit cell measures 0.055λ0 × 0.055λ0, where λ0 corresponds to its free space wavelength. The proposed FSS offers band stop characteristics with bandwidth of 137.5 MHz centered at 1.39 GHz. The symmetrical structure of the unit cell elements provides polarization independency. The miniaturized unit cell elements help achieving angular independency for both TE and TM mode of polarization. The miniaturized design provides excellent angular independency with negligible frequency shift for varying incident angles. A prototype of the FSS is fabricated and its simulation results are validated using measurements. [ABSTRACT FROM AUTHOR]