Search

The oxygen reduction reaction (ORR) is the oldest studied and most challenging of the electrochemical reactions. Due to its sluggish kinetics, ORR became the major contemporary technological hurdle for electrochemists, as it hampers the commercialization of fuel cell (FC) technologies. Downsizing the metal particles to nanoscale introduces unexpected fundamental modifications compared to the corresponding bulk state. To address these fundamental issues, various synthetic routes have been developed in order to provide more versatile carbon-supported low platinum catalysts. Consequently, the approach of using nanocatalysts may overcome the drawbacks encountered in massive materials for energy conversion. This review paper aims at summarizing the recent important advances in carbon-supported metal nanoparticles preparation from colloidal methods (microemulsion, polyol, impregnation, Bromide Anion Exchange...) as cathode material in low temperature FCs. Special attention is devoted to the correlation of the structure of the nanoparticles and their catalytic properties. The influence of the synthesis method on the electrochemical properties of the resulting catalysts is also discussed. Emphasis on analyzing data from theoretical models to address the intrinsic and specific electrocatalytic properties, depending on the synthetic method, is incorporated throughout. The synthesis process-nanomaterials structure-catalytic activity relationships highlighted herein, provide ample new rational, convenient and straightforward strategies and guidelines toward more effective nanomaterials design for energy conversion. [ABSTRACT FROM AUTHOR]

[Display omitted] • Cellulosic biomass-based glucose is selectively oxidized in a co-generation direct fuel cell. • Real-time evidence of glucose oxidation in fuel cell by C1-position to gluconate (90% selectivity). • Glucuronate production (10% selectivity) via the glucose oxidation at the C6-position. • Products distribution in direct alkaline glucose fuel cell is the same as in half-cell setup. Cellulosic biomass, which is basically a polymer of glucose, is the most abundant organic polymer on earth and there is significant interest in the development of advanced materials for its valorization through the waste-to-energy and water-to-chemical scenarios. Hence, a precise investigation of the monomer (glucose) electrooxidation in electrochemical reactors is a key starting point to tackle the whole cellulose and ultimately the entire biomass. To this end, we report herein new insights about the operation of a cogeneration direct alkaline glucose fuel cell (which includes an anion exchange membrane) that simultaneously produces electricity and mainly gluconate as the reaction product. The AuPt nanocatalysts of 3–5 nm particle size finely dispersed onto reduced graphene oxide (rGO) at a 20 wt% metal loading are obtained from an organic surfactant-free method, so-called the bromide anion exchange (BAE). Specifically, the electroanalytical investigation carried out with high-performance liquid ionic chromatography (HPLIC) and liquid chromatography coupled to mass spectrometry (LC-MS) demonstrate no carbon–carbon bond cleavage occurs, which represents an advance towards a CO 2 -free biomass valorization process. The comparison of the results commonly obtained in a three-electrode half-cell with those in an anion exchange membrane fuel cell shows that the trends in selectivity are the same. The fuel cell operation produces gluconate via a two-electron transfer process at 90% selectivity and 65% Faradaic efficiency. In addition to gluconate, glucuronate is also observed; both compounds are high value-added chemicals. This work contributes towards the engineering of novel electrocatalytic interfaces for the valorization of the surplus biomass into energy and chemicals. [ABSTRACT FROM AUTHOR]