Search

The geological disposal of high-level radioactive waste is the final step in the nuclear fuel cycle. It is realized via isolating the high-level radioactive waste in the geological environment with an appropriate system of engineered barriers. Radionuclides-containing materials must be isolated from the biosphere until the radioactivity contained in them has diminished to a safe level. In the case of high-level radioactive waste, it could take hundreds of thousands of years. Within such a long timescale, a number of physical and chemical processes will take part in the geological repository. For the assessment of radionuclide migration from a geological repository, it is necessary to predict the repository's behavior once placed in the host rock as well as the host-rock response to disturbances due to construction. In this study, the analysis of repository barriers (backfill, concrete, inner excavation disturbed zone (EDZ), outer EDZ, host rock) thermo–hydraulic–mechanical (THM) evolution was performed, and the scope of gas-induced desaturation was analyzed with COMSOL Multiphysics. The analysis was based on modelling of a two-phase flow of miscible fluid (water and H2) considering important phenomena such as gas dissolution and diffusion, advective–diffusive transport in the gaseous phase, and mechanical deformations due to thermal expansion of water and porous media. The importance of proper consideration of temperature-dependent thermodynamic properties of water and THM couplings in the analysis of near-field processes was also discussed. The modelling demonstrated that such activities as 50 years' ventilation of the waste disposal tunnel in initially saturated porous media, and such processes as gas generation due to corrosion of waste package or heat load from the waste, also led to desaturation of barriers. H2 gas generation led to the desaturation in engineered barriers and in a part of the EDZ close to the gas generation place vanishing soon after finish of gas generation, while the host rock remained saturated during the gas generation phase (50–100,000 years). Radionuclide transport properties in porous media such as effective diffusivity are highly dependent on the water content in the barriers determined by their porosity and saturation. [ABSTRACT FROM AUTHOR]

Radioactive waste disposal, as the final step of the open nuclear fuel cycle, is an important process to protect humans and the environment from harmful effects of ionising radiation. Approaching the construction of the geological repository, the understanding and predictability of the behavior of engineered barrier material becomes more important than ever. Therefore, a number of research studies are being focused on the experimental and numerical analysis of the engineered barrier material state and behavior under repository conditions. Engineered barrier material will be in contact with the host rock and waste packages, and its properties and behavior will be governed by complex and coupled thermo-hydro-mechanical processes. This paper presents the modeling activities of the Lithuanian Energy Institute, performed in the framework of the H2020 project BEACON (Bentonite Mechanical Evolution). The numerical model, developed in COMSOL Multiphysics (Burlington, MA 01803, USA), was applied for the modeling of experiments, performed by Ecole Polytechnique Federale de Lausanne (EPFL, Switzerland), on granular MX-80 bentonite in the odeometer cell. The hydromechanical behavior of a compacted bentonite sample was analyzed under different conditions: hydration with groundwater under confined volume conditions and hydration under free swelling conditions and subsequent mechanical loading. Model outcomes (swelling pressure, saturation, dry density, and void ratio) were compared to the available experimental data. The modeling results were in line with the analyzed experimental data. [ABSTRACT FROM AUTHOR]