Search

A tangential infrared thermography system is installed in the WEST tokamak to observe the thermal scene of the first wall and the divertor components through a wide-angle tangential view. The goal is to provide and monitor the heat load deposition on the plasma facing components. About one-sixth of the chamber is observed, including sectors of the baffle, the lower and upper divertors, one inner bumper, vertical displacement event (VDE) protections, one ICRH antenna, and other parts of the wall. It is used for real time machine protection by monitoring temperature thresholds in delimited region of interest, and for analysis of normal or specific heat load events during operation such as VDE, ELM, disruption or runaways. This wide-angle view uses one aspherical and one on-axis plane mirrors, a sapphire window and three lenses for the objective of the camera. The optical line is optimized for two wavelengths 1.7 and 4 µm. The field of view is 60° on a 512×640 pixels Focal Plane Array. The endoscope is fully actively cooled. The thermal scene is complex to interpret given the fully metallic and radiative environment and the uncertainties on the emissivity which is angular-dependent and changes with the surface properties. This involves significant inaccuracy on the recovery of the real temperature. In this context, an interpretation by modeling approach is better suited, based on ray-tracing simulations taking into account the optical properties of materials. For instance, this allowed discriminating reflections patterns from real thermal events in the wide-angle view. A description of the wide-angle infrared diagnostic and its performances is presented as well as experimental measurements obtained in the WEST Tokamak. [ABSTRACT FROM AUTHOR]

Highlights: [•] Detailed design development plan for the ITER tungsten divertor. [•] Latest status of the ITER tungsten divertor design. [•] Brief overview of qualification program for the ITER tungsten divertor and status of R&D activity. [Copyright &y& Elsevier]

Abstract: Budget restrictions have forced the ITER Organization to reconsider the baseline divertor strategy, in which operations would begin with carbon (C) in the high heat flux regions, changing out to a full-tungsten (W) variant before the first nuclear campaigns. Substantial cost reductions can be achieved if one of these two divertors is eliminated. The new strategy implies not only that ITER would start-up on a full-W divertor, but that this component should survive until well into the nuclear phase. This paper considers the risks engendered by such an approach with regard to known W plasma-material interaction issues and briefly presents the current status of a possible full-W divertor design. [Copyright &y& Elsevier]