Search

Nuclear astrophysics presents an extraordinary scientific potential for the study of the most powerful sources and the most violent events in the Universe. But in order to take full advantage of this potential, telescopes should be at least an order of magnitude more sensitive than present technologies. Today, Laue lenses have demonstrated their capability of focusing gamma-rays in the 100 keV–1 MeV domain, enabling the possibility of building a new generation of instruments for which sensitive area is decoupled from collecting area. Thus we have now the opportunity of dramatically increase the signal/background ratio and hence improve significantly the sensitivity. With a lens, the best detector is no longer the largest possible within a mission envelope. The point spread function of a Laue lens measures a few centimeters in diameter, but the field of view is limited by the detector size. Requirements for a focal plane instrument are presented in the context of the Gamma-Ray Imager mission (proposed to European Space Agency, ESA in the framework of the first Cosmic Vision AO): a 15–20 cm a side finely pixellated detector capable of Compton events reconstruction seems to be optimal, giving polarization and background rejection capabilities and 30 arcsec of angular resolution within a field of view of 5 arc min.

GRIPS is an envisioned space telescope for Gamma-Ray burst Investigation via Polarimetry and Spectroscopy. It will be capable of imaging gamma rays in the energy range from roughly 200 keV up to at least 50 MeV via Compton scattering and pair creation. GRIPS will also provide unprecedented sensitivities for nuclear-line science. With a field-of-view of roughly 50° HWHM, energy resolutions of ∼5% FWHM at 511 keV and ∼2% at 1809 keV, angular resolutions of 3.3° at 511 keV and 1.4° at 1809 keV, and effective areas after background cuts of ∼450 cm 2 at 511 keV and ∼200 cm 2 at 1809 keV, GRIPS will achieve all-sky narrow-line point-source sensitivities of 9 × 10 −6 ph/cm 2 /s for 511 keV and 4 × 10 −7 ph/cm 2 /s at 1809 keV after five years mission time.

The Advanced Compton Telescope (ACT) has been selected by NASA for a one-year “vision mission” study. The study’s main goal is to determine feasible instrument configurations to achieve ACT’s sensitivity requirements, and to give recommendations for technology development. Space-based instruments operating in the energy range of nuclear lines are subject to complex backgrounds generated by cosmic rays, earth albedo radiations, trapped particles, and diffuse gamma rays; typically measurements are significantly background-dominated. Therefore accurate, detailed simulations of the background induced in different ACT configurations, and exploration of event selection and reconstruction techniques for reducing these backgrounds, are crucial to determining the capabilities of a given instrument configuration. The ACT simulation team has assembled a complete suite of tools that allows the generation of particle backgrounds for a given orbit, their propagation through any instrument and spacecraft geometry – including delayed photon emission from instrument activation – as well as the selection and reconstruction of Compton events in the given detectors. We describe here the scope of the ACT simulation effort and the suite of tools used.

With focusing of gamma rays in the nuclear-line energy regime starting to establish itself as a feasible and very promising approach for high-sensitivity γ-ray (line) studies of individual sources, optimizing the focal plane instrumentation for γ-ray lens telescopes is a prime concern. Germanium detectors offer the best energy resolution available at ∼2 keV FWHM at 1MeV and thus constitute the detector of choice for a spectroscopy mission in the MeV energy range. Using a Compton detector focal plane has three advantages over monolithic detectors: additional knowledge about (Compton) events enhances background rejection capabilities, the inherently finely pixellated detector naturally allows the selection of events according to the focal spot size and position, and Compton detectors are inherently sensitive to γ-ray polarization. We use the extensive simulation and analysis package assembled for the ACT vision mission study to explore achievable sensitivities for different Ge Compton focal plane configurations as a first step towards determining an optimum configuration.

The High Efficiency Multi-mode Imager (HEMI) is a combined Compton and coded mask imager designed to detect and image gamma rays from ~30 keV up to a few MeV. It consists of 1-cm3-size coplanar-grid CdZnTe detectors with an energy resolution of ~2 % FWHM at 662 keV. We present the simulation and data analysis pipeline for HEMI as well as first results from measurements with an eight-detector test setup in Compton mode (spectra, angular resolution, and reconstructed images) and comparisons with simulations.

Hard X-ray and low-to-medium-energy gamma-ray telescopes may be exposed to many different types of background radiation ranging from cosmic rays to secondary particles from Earth’s atmosphere and charged particles trapped in radiation belts. Due to low source count rates in this energy regime, the background will dominate the source signal in many cases, in some up to a factor of 100. Therefore reliable Monte Carlo simulations of the background are extremely important to understand the recorded data and to predict the performance of future telescopes. We report on the status of the development and verification of a Geant4-based tool to simulate those background components, especially the resulting detector activation due to hadron interactions, as a successor to MGGPOD. Initial comparisons between simulations and background measurements of the TGRS detector are promising: Geant4 can reproduce the shape of the background to an accuracy better than 20%. In addition, many of the nuclear activation lines seen in the measurements are also present in the simulations — although there is still room for improvement especially with respect to the agreement of the line intensities.

The Medium-Energy Gamma-ray Astronomy library MEGAlib is an open-source object-oriented software library designed to simulate and analyze data of low-to-medium-energy gamma-ray telescopes, especially Compton telescopes. The library comprises all necessary simulation and data analysis tools including geometry construction, Monte-Carlo simulation, response creation, event reconstruction, image reconstruction, and other high-level data-analysis tools.

International audience; With focusing of gamma rays in the nuclear-line energy regime establishing itself as a feasible and very promising approach for high-sensitivity gamma-ray studies of individual sources, optimizing the focal plane instrumentation for gamma-lens telescopes is a prime objective. The detector of choice for a focusing nuclear-line spectroscopy mission would be the one with the best energy resolution available over the energy range of interest: Germanium. Using a Compton detector focal plane has three advantages over monolithic detectors: additional knowledge about (Compton) events enhances background rejection capabilities, the inherently finely pixellated detector naturally allows the selection of events according to the focal spot size and position and could enable source imaging, and Compton detectors are inherently sensitive to gamma-ray polarization. Suitable Ge-strip detectors that could be assembled into a sensitive high-resolution focal plane for a gamma-ray lens are available today. They have been extensively tested in the laboratory and flown on the Nuclear Compton Telescope balloon from Ft. Sumner in 2005. In the course of the ACT vision mission study, an extensive simulation and analysis package for Compton telescopes has been assembled. We leverage off this work to explore achievable sensitivities for different Ge Compton focal plane configurations - and compare them to sensitivities achievable with less complex detectors - as a step towards determining an optimum configuration.

MAX is a proposed Laue lens gamma-ray telescope taking advantage of Bragg diffraction in crystals to concentrate incident photons onto a distant detector. The Laue lens and the detector are carried by two separate satellites flying in formation. Significant effort is being devoted to studying different types of crystals that may be suitable for focusing gamma rays in two 100 keV wide energy bands centered on two lines which constitute the prime astrophysical interest of the MAX mission: the 511 keV positron annihilation line, and the broadened 847 keV line from the decay of 56Co copiously produced in Type Ia supernovae. However, to optimize the performance of MAX, it is also necessary to optimize the detector used to collect the source photons concentrated by the lens. We address this need by applying proven Monte Carlo and event reconstruction packages to predict the performance of MAX for three different Ge detector concepts: a standard coaxial detector, a stack of segmented detectors, and a Compton camera consisting of a stack of strip detectors. Each of these exhibits distinct advantages and disadvantages regarding fundamental instrumental characteristics such as detection efficiency or background rejection, which ultimately determine achievable sensitivities. We conclude that the Compton camera is the most promising detector for MAX in particular, and for Laue lens gamma-ray telecopes in general., Comment: accepted for publication in special issue of Experimental Astronomy for Proceedings of Gamma-Wave 2005 held at Bonifacio, France; A&A style file

The Nuclear Compton Telescope (NCT) is a balloon-borne soft gamma ray (0.2-10 MeV) telescope designed to study astrophysical sources of nuclear line emission and gamma ray polarization. A prototype instrument was successfully launched from Ft. Sumner, NM on June 1, 2005. The NCT prototype consists of two 3D position sensitive High-Purity-Germanium (HPGe) strip detectors fabricated with amorphous Ge contacts. The novel ultra-compact design and new technologies allow NCT to achieve high efficiencies with excellent spectral resolution and background reduction. We have completed our preliminary calibrations of both the energy and the 3D position of interactions for the prototype instrument. Determination of both the energy and the position is crucial for Compton imaging, and minimizing the errors in each improves the angular resolution. Because of the compact design of the detectors and the high spectral resolution of germanium, we expect the position uncertainties to dominate over energy uncertainties when determining the angular resolution. Detailed depth calibrations and a preliminary determination of angular resolution as a function of energy are described. We determine how measurement uncertainties and physical limitations (energy uncertainty, position uncertainty, Doppler broadening, and systematics) constrain the ultimate angular resolution.

We present the analysis of the first observations of the Cygnus region by the SPI spectrometer onboard the Integral Gamma Ray Observatory, encompassing ${\sim}$ 600 ks of data. Three sources namely Cyg X-1, Cyg X-3 and EXO 2030+375 were clearly detected. Our data illustrate the temporal variability of Cyg X-1 in the energy range from 20 keV to 300 keV. The spectral analysis shows a remarkable stability of the Cyg X-1 spectra when averaged over one day timescale. The other goal of these observations is SPI inflight calibration and performance verification. The latest objective has been achieved as demonstrated by the results presented in this paper., Comment: 6 pages, 10 figures, accepted for publication in A&A (special INTEGRAL volume)

We report the scientific motivation for and performance measurements of a prototype detector system for SONTRAC, a solar neutron tracking experiment designed to study high- energy solar flare processes. The full SONTRAC instrument will measure the energy and direction of 20 to 200 MeV neutrons by imaging the ionization tracks of the recoil protons in a densely packed bundle of scintillating plastic fibers. The prototype detector consists of a 12.7 mm square bundle of 250 micrometer scintillating plastic fibers, 10 cm long. A photomultiplier detects scintillation light from one end of the fiber bundle and provides a detection trigger to an image intensifier/CCD camera system at the opposite end. The image of the scintillation light is recorded. By tracking the recoil protons from individual neutrons the kinematics of the scattering are determined, providing a high signal to noise measurement. The predicted energy resolution is 10% at 20 MeV, improving with energy. This energy resolution translates into an uncertainty in the production time of the neutron at the Sun of 30 s for a 20 MeV neutron, also improving with energy. A SONTRAC instrument will also be capable of detecting and measuring high-energy gamma rays greater than 20 MeV as a 'solid-state spark chamber.' The self-triggering and track imaging features of the prototype are demonstrated with cosmic ray muons and 14 MeV neutrons. Design considerations for a space flight instrument are presented.