Search

Filament-based dispensers of thorium have been investigated at the IGISOL facility, Jyväskylä, for potential use as a thorium ion source for future collinear laser spectroscopy experiments. Several different filaments were manufactured in the Institute of Atomic and Subatomic Physics of TU Wien, with 232Th and 229Th prepared on tantalum substrates either by drying thorium nitrate solution or via molecular plating, while adding a layer of zirconium for oxide reduction. The filaments were characterized in a helium-filled gas cell by performing selective and efficient in-gas-cell resonance laser ionization and by analyzing the resulting ion beams by mass spectrometry. Additionally, the in-gas-cell laser ionization process of thorium was further characterized by wavelength scans, saturation measurements and by recording the temporal behavior of extracted ion pulses. Although an ion source was successfully created with mass-separated intensities over 10 6 ions/s, the required high filament temperature resulted in significant contributions from interfering impurities and deterioration of the filament structure. [ABSTRACT FROM AUTHOR]

In-gas-cell resonance laser ionization has been performed on long-lived isotopes of Pu at the IGISOL facility, Jyväskylä. This initiates a new programme of research towards high-resolution optical spectroscopy of heavy actinide elements which can be produced in sufficient quantities at research reactors and transported to facilities elsewhere. In this work a new gas cell has been constructed for fast extraction of laser-ionized elements. Samples of 238–240,242 Pu and 244 Pu have been evaporated from Ta filaments, laser ionized, mass separated and delivered to the collinear laser spectroscopy station. Here we report on the performance of the gas cell through studies of the mass spectra obtained in helium and argon, before and after the radiofrequency quadrupole cooler-buncher. This provides valuable insight into the gas phase chemistry exhibited by Pu, which has been additionally supported by measurements of ion time profiles. The resulting monoatomic yields are sufficient for collinear laser spectroscopy. A gamma-ray spectroscopic analysis of the Pu samples shows a good agreement with the assay provided by the Mainz Nuclear Chemistry department. [ABSTRACT FROM AUTHOR]

Abstract: Gas jets emitted from an ion guide have been studied as a function of nozzle type and gas cell-to-background pressure ratio in order to obtain a low divergent, uniform jet over a distance of several cm. The jet has been probed by imaging the light emitted from excited argon or helium gas atoms. For a simple exit hole or converging-diverging nozzle, the jet diameter was found to be insensitive to the nozzle shape and inlet pressure. Sonic jets with a FWHM below 6mm were achieved with a background pressure larger than 1mbar in the expansion chamber. The measurements are supported by the detection of radioactive recoils from an alpha recoil source mounted within the gas cell. A Laval nozzle produced a well-collimated supersonic jet at low background pressures with a FWHM of over a distance of 14cm. Direct Pitot probe measurements, on-axis, revealed a non-uniform pressure distribution in the gas jet of the Laval nozzle, supporting the visual observations. All measurements are motivated by the requirement of a good geometrical overlap between atoms and counter-propagating laser beams in the gas cell-based Laser Ion Source Trap (LIST) project. Computational fluid dynamics gas flow simulations were initiated to guide the future development of the gas jet system. [Copyright &y& Elsevier]

Abstract: The laser ion source at the IGISOL facility, Jyväskylä, has been used to study the effects of the passage of a primary beam through an ion guide via the dynamic time profiles of yttrium and related molecular compounds. The accessibility of a neutral fraction for laser ionization is shown to be restricted to the nozzle region in the presence of a weak plasma. The survival of this neutral fraction cannot be explained by recombination of the buffer gas alone and perhaps indicates a suppression of the transport of ions due to a plasma-generated electric field. The concept of a competition between the processes that create and destroy the ion of interest is used to explain the different trends in the ratio of yttrium to yttrium oxide following the extraction of a stopped primary beam of 89Y21+ in both helium and argon buffer gases. [Copyright &y& Elsevier]

Results of offline commissioning tests for a new dedicated gas cell for the Mass Analysing Recoil Apparatus (MARA) Low-Energy Branch are reported. Evacuation time, ion survival and transport efficiency in helium buffer gas were characterized with a radioactive 223 Ra α -recoil source. Suppression of the ion signal, originating from non-neutralized species in the gas cell, was explored with 219 Rn ions, the daughter recoil of 223 Ra , as a function of voltage applied to one of the ion-collector electrodes. Two-step laser resonance ionization of stable tin isotopes produced inside the gas cell from a heated bronze filament was demonstrated, and broadening of the atomic resonances in argon buffer gas was studied. These tests indicate the suitability of the new gas cell for future in-gas laser spectroscopy studies of exotic nuclei at the Accelerator Laboratory of the University of Jyväskylä. [ABSTRACT FROM AUTHOR]

To study exotic nuclides at the borders of stability with laser ionization and spectroscopy techniques, highest efficiencies in combination with a high spectral resolution are required. These usually opposing requirements are reconciled by applying the in-gas-laser ionization and spectroscopy (IGLIS) technique in the supersonic gas jet produced by a de Laval nozzle installed at the exit of the stopping gas cell. Carrying out laser ionization in the low-temperature and low density supersonic gas jet eliminates pressure broadening, which will significantly improve the spectral resolution. This article presents the required modifications at the Leuven Isotope Separator On-Line (LISOL) facility that are needed for the first on-line studies of in-gas-jet laser spectroscopy. Different geometries for the gas outlet and extraction ion guides have been tested for their performance regarding the acceptance of laser ionized species as well as for their differential pumping capacities. The specifications and performance of the temporarily installed high repetition rate laser system, including a narrow bandwidth injection-locked Ti:sapphire laser, are discussed and first preliminary results on neutron-deficient actinium isotopes are presented indicating the high capability of this novel technique. [ABSTRACT FROM AUTHOR]

Abstract: The laser ionization efficiency of the Leuven gas cell-based laser ion source was investigated under on- and off-line conditions using two distinctly different laser setups: a low-repetition rate dye laser system and a high-repetition rate Ti:sapphire laser system. A systematic study of the ion signal dependence on repetition rate and laser pulse energy was performed in off-line tests using stable cobalt and copper isotopes. These studies also included in-gas-jet laser spectroscopy measurements on the hyperfine structure of 63Cu. A final run under on-line conditions in which the radioactive isotope 59Cu (T 1/2 =81.5s) was produced, showed a comparable yield of the two laser systems for in-gas-cell ionization. However, a significantly improved time overlap by using the high-repetition rate laser system for in-gas-jet ionization was demonstrated by an increase of the overall duty cycle, and at the same time, pointed to the need for a better shaped atomic jet to reach higher ionization efficiencies. [Copyright &y& Elsevier]