Search

We analyzed original and published seismic data to investigate the distribution and characteristics of subsurface fluid flow features in the gas hydrate provinces along the northeastern South China Sea (SCS) continental slope, including Jiulong Ridge, Horseshoe Ridge, Pointer Ridge, and Formosa Ridge. Numerous features indicating the presence/migration of hydrocarbons, such as bottom simulating reflections (BSRs), bright spots, gas chimneys, and fluid flow through faults, are identified. The results reveal that the hydrofracturing-induced gas chimneys act as the primary conduits for the overall focused fluid flow in the study area, though fluid flow along permeable faults is also observed at Pointer Ridge. Thirty-three gas chimneys identified are categorized into two types depending on their capability for focused fluid flow migrating into the gas hydrate stability zone (GHSZ). The type-I chimneys that transport fluids into the GHSZ contribute to gas hydrate formation and may even lead to seafloor seepage. Buried by a considerable thickness of sediments, the type-II chimneys cannot directly contribute to generating gas hydrate and surface seepage. Our results suggest that the sedimentary processes and fluid accumulation significantly control the development of gas chimneys in the study area. Since the focused fluid flow conduits that indicate overpressured fluids are critical pathways that feed gas into the GHSZ and form gas hydrates, utmost attention should be paid to them during hydrocarbon exploration. [ABSTRACT FROM AUTHOR]

Large amounts of methane, a potent greenhouse gas, are stored in hydrates beneath the seafloor. Sea level changes can trigger massive methane release into the ocean. It is not clear, however, whether surficial seafloor processes can cause comparable discharge. Previously, fluid migration was difficult to study due to a lack of spatially dense seismic and thermal observations. Here we examine a gas hydrate site at Four‐Way‐Closure Ridge off SW Taiwan using a high‐resolution 3‐D seismic cube, together with bottom‐simulating reflections (BSRs) mapped in the cube, a thermal probe data set, and 3‐D thermal modeling results. We document, on a scale of tens of meters, the interaction between surficial sedimentary processes, fluid flow, and a dynamic gas hydrate system. Fluid migrates upward through dipping permeable strata in the limb, the slope basin, and along thrust faults and ridge‐top normal faults. The seismic data also reveal several double BSRs that underlie seabed sedimentary sliding and depositional features. Abrupt changes in subsurface pressure and temperature due to the rapid seabed sedimentary processes can cause a rapid shift of the base of the gas hydrate stability zone. This shift may be either downward or upward and would result in the accumulation or dissociation of hydrate in sediments sandwiched by the double BSRs, respectively. We propose that dynamic surficial processes on the seafloor together with shallow focused fluid flow affect hydrate distribution and saturation at depth and may even result in methane expulsion into the ocean if such localized features are common along convergent plate boundaries. Plain Language Summary: Gas hydrates are ice‐like compounds in marine sediments. Shallow surface dynamic processes may affect the hydrate saturation beneath the seabed. We combine 3‐D seismic and thermal probe data, with numerical geothermal modeling to investigate the geological processes controlling the distribution and formation of gas hydrates beneath thrust ridge anticlines. We also study fluid flow patterns under the seabed and found that localized fluid flow and rapid surficial erosional processes have significantly altered the temperature and pressure conditions of hydrate bearing sediment strata at depth, ultimately influencing gas hydrate formation and dissociation. We propose to conduct hydrate exploration close to thrust anticlines, where such active processes might enrich the saturation of gas hydrates or even influence fluid emission into the ocean if similar processes are widespread along continental margins. Key Points: Mass wasting and rapid sedimentation can generate double BSRs and enhance hydrate saturationRapid seabed processes might trigger hydrate dissociation and active venting of methane and other fluids in shallow sedimentary sectionFocused fluid flow updip along the slope basin strata can locally enhance the hydrate saturation [ABSTRACT FROM AUTHOR]

The architecture and distribution of mud diapirs are shaped by tectonic activity, sediment filling and unbalanced loading characteristics. Mud diapir development also controls spatial variations of intraslope basins in slope areas and can spur upward fluid migration with diapiric intrusion. The offshore area of southwestern Taiwan is an incipient collision zone in which thick sequences of deep marine sediments filled a rapidly subsided foredeep basin during the Pliocene. Large volumes of deposited sediment serve as source materials of diapiric ridges that extend NNE-SSW, and some mud diapirs even extend to on land SW Taiwan with subsurface signatures of gas. This study examines relationships between mud diapir and intraslope basin development in convergent tectonics through seismic and bathymetry data analyses. Four types of mud diapirs are identified: (1) buried symmetrical diapirs; (2) symmetrical diapirs extruded above the seafloor; (3) asymmetric and irregular diapirs; and (4) small individual diapirs manifested as mud intrusions found in local areas. A 3-stage model is proposed as a tool for describing the development and distribution of these types of diapirs. We further examine the relationship between mud diapirs and intraslope basin development patterns by analyzing 2D and 3D seismic images to reveal structural and sedimentary processes occurring in the Lower Fangliao Basin. This basin is characterized by BSR and amplitude anomalies of seismic profiles and is a prospect of the Taiwanese gas hydrate investigation project. An 8-stage development model with six depositional units is proposed as a means to explain the evolution of diapirs, submarine canyons, and fold and fault activities in the Lower Fangliao Basin, in turn revealing the relationship between mud diapir formation and intraslope basin development offshore of southwestern Taiwan. [ABSTRACT FROM AUTHOR]

We utilized reflection seismic and bathymetric data to infer the canyon-infilling, fold uplift, and gas hydrate occurrences beneath the frontal fold at the toe of the accretionary wedge, offshore SW Taiwan. The lateral migrating paleo-Penghu canyons has cut across the frontal fold with six distinct canyon/channel incisions marked by channel infills. The longitudinal bathymetric profile along the modern canyon course shows a knickpoint of ~300 m relief at this frontal fold, indicating that the rate of fold uplift is greater than that of canyon incision. The age for the initial thrusting of this fontal fold is around 240 kyr ago, as estimated by using the maximum thickness of growth strata of this fold divided by the sedimentation rate obtained from a nearby giant piston core. Bottom simulating reflector (BSR) on seismic sections indicates the base of gas hydrate stability zone. Beneath the frontal fold, there is a widespread occurrence of BSRs, suggesting the highly probable existence of substantial quantities of gas hydrates. A seismic flat spot and a few push-down reflectors below BSR are found lying beneath the anticlinal axis with bathymetric four-way dip closure. The flat spot, cutting across a series of dipping reflections beneath BSR, may indicate the contact between free gas and its underlying formation water. The push-down reflectors beneath BSRs are interpreted to result from abundant free gas hosted beneath the gas hydrate stability zone. The multiple paleo-canyon infills seen along and beneath the frontal fold and above BSRs may provide thick porous sands to host gas hydrates in the frontal fold. [ABSTRACT FROM AUTHOR]

Abstract: A dense seismic reflection survey with up to 250-m line-spacing has been conducted in a 15 × 15 km wide area offshore southwestern Taiwan where Bottom Simulating Reflector is highly concentrated and geochemical signals for the presence of gas hydrate are strong. A complex interplay between north–south trending thrust faults and northwest–southeast oblique ramps exists in this region, leading to the formation of 3 plunging anticlines arranged in a relay pattern. Landward in the slope basin, a north–south trending diapiric fold, accompanied by bright reflections and numerous diffractions on the seismic profiles, extends across the entire survey area. This fold is bounded to the west by a minor east-verging back-thrust and assumes a symmetric shape, except at the northern and southern edges of this area, where it actively overrides the anticlines along a west-verging thrust, forming a duplex structure. A clear BSR is observed along 67% of the acquired profiles. The BSR is almost continuous in the slope basin but poorly imaged near the crest of the anticlines. Local geothermal gradient values estimated from BSR sub-bottom depths are low along the western limb and crest of the anticlines ranging from 40 to 50 °C/km, increase toward 50–60 °C/km in the slope basin and 55–65 °C/km along the diapiric fold, and reach maximum values of 70 °C/km at the southern tip of the Good Weather Ridge. Furthermore, the local dips of BSR and sedimentary strata that crosscut the BSR at intersections of any 2 seismic profiles have been computed. The stratigraphic dips indicated a dominant east–west shortening in the study area, but strata near the crest of the plunging anticlines generally strike to southwest almost perpendicular to the direction of plate convergence. The intensity of the estimated bedding-guided fluid and gas flux into the hydrate stability zone is weaker than 2 in the slope basin and the south-central half of the diapiric fold, increases to 7 in the northern half of the diapiric fold and plunging anticlines, and reaches a maximum of 16 at the western frontal thrust system. Rapid sedimentation, active tectonics and fluid migration paths with significant dissolved gas content impact on the mechanism for BSR formation and gas hydrate accumulation. As we begin to integrate the results from these studies, we are able to outline the regional variations, and discuss the importance of structural controls in the mechanisms leading to the gas hydrate emplacements. [Copyright &y& Elsevier]

Abstract: We have implemented a 2-dimensional numerical model for simulating gas hydrate and free gas accumulation in marine sediments. The starting equations are those of the conservation of the transport of momentum, energy, and mass, as well as those of the thermodynamics of methane hydrate stability and methane solubility in the pore-fluid. These constitutive equations are then integrated into a finite element in space, finite-difference in time scheme. We are then able to examine the formation and distribution of methane hydrate and free gas in a simple geologic framework, with respect to the geothermal heat flow, fluid flow, the methane in-situ production and basal flux. Three simulations are performed, leading to the build up of hydrate emplacements largely linear through time. Models act primarily as free gas accumulators and are relatively inefficient with respect to hydrate emplacements: 26–33% of formed methane are converted to hydrate. Seepage of methane across the sea-floor is negligible for fluid flow below 2. 10−11 kg/m2/s. At 5.625 10−11 kg/m2/s however, 9.7% of the formed methane seeps out of the model. Moreover, along strike variation arising in the 2-dimensional model are outlined. In the absence of focused flow, the thermodynamics of hydrate accumulation are primarily one-dimensional. However, changes in free methane compressibility (density) and methane solubility (the intrinsic dissolved methane flux) subtlety impact on the formation of a free gas zone and the distribution of the hydrate emplacements in our 2-dimensional simulations. [Copyright &y& Elsevier]

Horizon velocity analysis and pre-stack depth migration of seismic profiles collected by R/V Maurice Ewing in 1995 across the accretionary prism off SW Taiwan and along the continental slope of the northernmost South China Sea were implemented for identifying gas hydrates. Similarly, a survey of 32 ocean-bottom seismometers (OBS), with a spacing of about 500 m, was conducted for exploring gas hydrates on the accretionary prism off SW Taiwan in April 2006. Travel times of head wave, refraction, reflection and converted shear wave identified from the hydrophone, vertical and horizontal components of these OBS data were applied for imaging P-wave velocity and Poisson's ratio of hydrate-bearing sediments. In the accretionary prism off SW Taiwan, we found hydrate-bearing sediment, with a thickness of about 100-200 m, a relatively high P-wave velocity of 1.87-2.04 km/s and a relatively low Poisson's ratio of 0.445-0.455, below anticlinal ridges near imbricate emergent thrusts in the drainage system of the Penghu and Kaoping Canyons. Free-gas layer, with a thickness of about 30-120 m, a relatively low P-wave velocity of 1.4-1.8 km/s and a relatively high Poisson's ratio (0.47-0.48), was also observed below most of the bottom-simulating reflectors (BSR). Subsequently, based on rock physics of the three-phase effective medium, we evaluated the hydrate saturation of about 12-30% and the free-gas saturation of about 1-4%. The highest saturation (30% and 4%) of gas hydrates is found below anticlines due to N-S trending thrust-bounded folds and NE-SW thrusting and strike-slip ramps in the lower slope of the accretionary prism. We suggest that fluid may have migrated through the relay-fault array due to decollement folding and gas hydrates have been trapped in anticlines formed by the basement rises along the thrust faults. In contrast, in the rifted continental margin of the northernmost South China Sea, P-wave velocities of 1.9-2.2 km/s and 1.3-1.6 km/s, and thicknesses of about 50-200 m and 100-200 m, respectively, for a hydrate layer and a free-gas layer were imaged below the remnant and erosional ridges in the upper continental slope. High P-wave velocity of hydrate-bearing sediment below erosional ridges may also indicate high saturation of hydrates there. Normal faults due to rifting in the South China continental crust may have provided conduits for gas migration below the erosional ridges where P-wave velocity of hydrate-bearing sediment in the passive continental margin of the northernmost South China Sea is greater than that in the active accretionary prism off SW Taiwan. [ABSTRACT FROM AUTHOR]

Pointer Ridge is a gas hydrate prospect on the South China Sea continental slope offshore SW Taiwan. It is characterized by densely distributed bottom simulating reflections (BSRs), active gas seepage, and potential sandy gas hydrate reservoirs. To understand how the fluids have migrated toward the seafloor, and the role of geological processes in the gas hydrate system, we have collected and analyzed high-quality 2D and 3D reflection seismic data. We first mapped the spatial distribution of the BSRs, and interpreted a major normal fault, Pointer Ridge Fault (PR Fault). The NE-SW trending fault dips to the east, and separates the erosional regime to the west from the depositional regime to the east. One active vent site was identified directly above the PR Fault, while another is located on a topographic high to the west of the fault. On the hanging block of the fault we found at least one major unconformity. The seismic data indicate refilled channels with coarser-grained sediments in the hanging wall of the normal fault. Seismic attribute analysis shows subsurface fluid conduits and potential gas hydrate reservoirs. We propose two types of gas chimneys, which are separated by the fault. Gas plumes derived from hydroacoustic data are mostly from the footwall block of the fault. We infer that fluid flow is more active in the erosional environment compared to the depositional one, and that this is the result of reduced overburden. The methane-bearing fluids migrate upward along the PR Fault and chimneys and form hydrates above the base of the gas hydrate stability zone. Based on seismic interpretation and seismic attribute analysis, we postulate that the channel infill constitutes the most promising hydrate reservoirs in this geological setting. In the surveyed area of Pointer Ridge these channels occur mainly below the gas hydrate stability zone. • Present original 2D/3D seismic data to reveal the geologic setting of a potential gas hydrate prospect off SW Taiwan. • Active fluid flow processes are studied by analyzing water column and seismic data. • A conceptual model is proposed for the gas hydrate system of Pointer Ridge by detailed seismic attribute analysis. • Potential gas hydrate reservoirs that might be targets for future exploration are identified. [ABSTRACT FROM AUTHOR]

Abstract: Bottom simulating reflectors (BSRs) observed on seismic sections are often considered as indicators for the existence of free gas, delineating the base of the gas hydrate stability zone. Abundant BSRs seen on seismic sections acquired off the SW coast of Taiwan indicate the likely and prevalent existence of gas hydrates in the study area. This study aims to characterize the occurrence of BSRs off SW Taiwan and to understand their relationship to topography, tectonic activity, and possible migration paths of gas-bearing fluids in this area. The tectonic setting off SW Taiwan is during the initial stage of arc-continent collision between the Luzon arc and the northeastern continental margin of the South China Sea. A series of west-vergent, imbricated folds and emergent thrusts develop in the accretionary wedge. Each fold-and-thrust sequence corresponds to an elongated submarine ridge if its crest is not buried by flat-lying sediments. By contrast, normal faulting prevails in the northeastern margin of the South China Sea. A correlation between distribution of BSRs, topography, and tectonic features can be observed. Four major occurrences of BSR types of ridge type, basin type, submarine-canyon type, and continental slope type, are recognized on the basis of the relationship of BSRs to topographic and structural features. Main characteristics of BSRs in the study area can be described as: (1) they occur mostly beneath topographic highs; (2) a discordant relationship between surfaces of the seafloor and underlying strata where BSRs are present; (3) BSRs are prevalent especially beneath the crest and flank of the upthrusting, large and inclined slope basins; and (4) in general, a series of high-amplitude dipping reflectors beneath BSRs can be found. These features indicate that gas hydrate may accumulate preferably beneath topographic ridges especially underneath four-way-dip topographic closures. This effect may exist because the buoyancy-driven, gas-bearing fluids tend to migrate upward and laterally toward structural highs and their corresponding topographic ridges. The distribution of BSRs indicates that gas hydrates occur more commonly in the accretionary wedge than in the South China continental margin. We suggest that the more widespread occurrence of gas hydrates in the accretionary wedge is due to the existence of multiple fault zones, which may help to tap more deep-seated gas-bearing fluids, in addition to the shallow biogenic gas, in this region. [Copyright &y& Elsevier]

Fluid migration patterns are important for understanding gas hydrate and hydrocarbon systems. However, conducting experiments on or below the seafloor is difficult because crustal fluid flow rates are usually very slow, so long term observations are needed. Temperature can be used as a good tracer for studying fluid flows. Temperatures derived from bottom-simulating reflectors (BSRs) might help to understand fluid migration patterns in shallow marine sediments. In this study, we studied 2D fluid flow patterns in two potential gas hydrate provinces offshore southwestern Taiwan: the Yung-An Ridge in the active margin and Formosa Ridge in the passive margin. We used 2D bathymetry, average seafloor temperatures and regional geothermal gradients measured by thermal probes, as constraints to construct 2D theoretical conductive temperature fields using finite element methods. We then compared the BSR-based temperature with the theoretical conductive temperature field. The results show a temperature discrepancy attributed to advective heat transfer due to fluid migration. For the Yung-An Ridge, the BSR-based temperatures are about 2°C higher than the model: Especially in (1) near a fault zone, (2) under the eastern flank where there are strong seismic reflectors in a pseudo-3D seismic dataset, and (3) near a fissure zone. For the Formosa Ridge, our results showed a distinct decrease in temperatures around the southern peak of the ridge, where an active gas plume was found. BSR-based temperatures predict on average 2°C lower than the model. At these two sites, the shallow temperature fields are strongly affected by 2D bathymetry. However, new insights regarding fluid flow patterns can be obtained using this model approach. [ABSTRACT FROM AUTHOR]