Search

The effects of submicron core-shell rubber (CSR) particles, nanoclay fillers, and molding parameters on the mechanical properties and cell structure of injection-molded microcellular polyamide-6 (PA6) composites were studied. The experimental results of PA6 nanocomposites with 5.0 and 7.5 wt% nanoclay loadings and of CSR-modified PA6 composites with 0.5 and 3.1 wt% CSR loadings were compared to their neat resin counterparts. This study found that nanoclay was more efficient in promoting a smaller cell size, larger cell density, and higher tensile strength for microcellular injection molding parts. A higher nanoclay loading led to more brittle behavior for microcellular parts. It was found that a proper amount of CSR particles could be added to the microcellular injection-molded PA6 to reduce the cell size, increase the cell density, and enhance the toughness of the molded part. However, CSR particles were less effective cell nucleation agents as compared to nanoclay for producing desirable cell structures, and a higher CSR loading was found to have diminishing effects on the process and on the properties of the parts. POLYM. ENG. SCI., 45:773–788, 2005. © 2005 Society of Plastics Engineers

This paper presents the effects of processing parameters and submicron core-shell rubber particle filler on the mechanical properties and cell morphology of microcellular injection molded polyamide-6 (PA-6) composites. Three types of materials are studied, namely, neat PA-6 resin, and 0.5 wt% and 3.1 wt% core-shell rubber polybutylacrylate-polymethylmethacrylate-filled PA-6 composites. This study shows that the addition of a small amount (0.5%) of core-shell rubber particles improved the ductility and impact strength of micro-cellular injection molded PA-6 samples. In comparison to the microcellular injection molded PA-6 polymer-clay nanocomposite, the samples with a small amount (0.5%) of core-shell rubber had much higher impact strength and ductility. The small addition of core-shell rubber also reduced cell size and increased cell density of the microcellular injection molded PA-6 parts, in comparison to their neat resin counterparts. On the other hand, at higher core-shell rubber loading, the cell size and density were found to be similar to that of the neat resin.

The crystallization behaviors of polyamide-6 (PA-6) and its nanocomposites undergoing the microcellular injection molding process are studied using Transmission Electron Microscopy (TEM), X-ray Diffractometer (XRD), Polarized Optical Microscopy (POM), and Differential Scanning Calorimetry (DSC). The relationships among the morphology, the mechanical property of the molded parts, and the crystallization behavior are investigated. With the addition of nanoclays in microcellular injection molded parts, the growth of the γ-form crystal is suppressed and the formation of γ-form crystals is promoted. Both nanoclay and dissolved gas have a big influence on PA-6 crystalline structures. The existence of nanoclay increases the initial crystallization rate. But with extra addition of nanoclays in the polymer matrix, the increase of crystallization rate is reduced. Microcellular injection molded nanocomposites with proper amount of nanoclays possess the maximum crystallization activation energy and produce a finer and denser microcell structure which leads to better mechanical properties.